• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 1986

The swelling and hydration properties of Korean red ginseng tails and yield of total solids in extract were studied during extraction with ethanol solution having a concentration of 0-90% at $60-100^{\circ}C$. Extraction was carried out 5 times which was taken 8 hours per each time of extraction. The swelling, hydration and total solids yield were increased as the ethanol concentration decreased and as the extraction temperature raised. The cumulative value of solids yield suggested that three times of extractions with water or 70% ethanol were effective to recover more than 84%. Linear regression analysis on the properties investigated and extraction conditions showed a linear logarithmic relationship .

• New & Renewable Energy
• /
• v.6 no.3
• /
• pp.22-29
• /
• 2010

The concept of Ocean Thermal Energy Conversion (OTEC) is simple and various types of OTEC have been proposed and tried. However the location of OTEC is limited because OTEC requires $20^{\circ}C$ of temperature difference as a minimum, so most of OTEC plants were constructed and experimented in tropical oceans. To solve this we proposed the modified OTEC which uses condenser discharged thermal energy of existing fossil or nuclear power plants. We call this system CTEC (Condenser Thermal Energy Conversion) as this system directly uses $32^{\circ}C$ partially saturated steam in condenser instead of $20{\sim}25^{\circ}C$ surface sea water as heat source. Increased temperature difference can improve thermal efficiency of Rankine cycle, but CTEC should be located near existing plant condenser and the length of cold water pipe between CTEC and deep cold sea water also increase. So friction loss also increases. Calculated result shows the change of efficiency, pumping power, net power and other parameters of modeled 7.9 MW CTEC at given condition. The calculated efficiency of CTEC is little larger than that of typical OTEC as expected. By proper location and optimization, CTEC could be considered another competitive renewable energy system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.76.1-76.1
• /
• 2011

석탄 가스화기 내에서 슬래그의 축적에 의한 막힘 현상 등으로 발생 가능한 조업중단을 예방하기 위해 탄의 종류에 따른 슬래그의 유동을 정확히 예측하는 것은 중요하다. 슬래그의 유동은 원료인 석탄의 회 성분 조성 그리고 가스화기 온도의 영향을 크게 받는다. 회가 용융된 형태인 슬래그의 융점 특성을 파악하여 슬래그 거동을 예측하기 위해서는 회를 조성하고 있는 주성분의 비율 뿐 아니라 소량의 성분들도 고려하여야 한다. 또한, 가스화기 조업 조건 중 수증기 분압이 슬래그 점도에 미치는 변화를 파악하여 공정 조건 확립 및 슬래그 계통 제어 로직에 반영 할 수 있다. 따라서, 대표적 열화학 평형계산 프로그램인 Factsage를 이용하여 슬래그 성분의 액상선 온도를 예측해보았다. 슬래그는 회 성분의 조성에 따라 결정 슬래그와 유리 슬래그로 나눌 수 있다. 본 연구에서는 결정 슬래그로는 Alaska Usibelli 탄을, 유리 슬래그로는 Kideco 탄의 조성을 사용하여, 가스화기 조업 조건 중 수증기의 분압에 따라 석탄 슬래그의 형성 및 점도 변화에 직접적인 영향을 미치는 결정 형성에 대한 상관관계를 예측해 보았다. 또한, 슬래그 유동에 영향을 줄 수 있는 요인으로써, 석탄의 품질을 결정하는 인자인 Base/Acid Ratio, Iron in Ash, Calcium in Ash, Silica-to-Alumina Ratio, Inron-to-Calcium Ratio를 달리 변화시켜가며 슬래그 점도 변화에 직접적인 영향을 미치는 결정 형성을 예측하였다. 이 예측결과는 향후 실험 데이터와 비교하여, 슬래그 처리 부분의 모니터링에 기초 자료로 활용될 뿐 아니라, 슬래그점도 측정 시스템의 운전 파라미터를 도출하는데 이용 가능할 것이다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.05a
• /
• pp.45-52
• /
• 2001

The study on the heat exchanger with catalytic combustion was performed as the development of the catalytic combustion applications. This study tried to achieve the both goals-the mixture preheating and the heat transfer to working fluid simultaneously by using the steady state catalytic combustion. The combustion characteristics were investigated with the quantitative, qualitative experimental variants of the mixture. In addition, the temperature distribution of catalytic layer was investigated to investigate the correlation between the combustion characteristics and the heat balance of the catalytic layer. As a result, the steady state reaction within the appropriate range of temperature is the critical factor in catalytic applications. To get this, the sensible control of both the mixture flow and the heat balance of catalytic layer were required.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.545-551
• /
• 2016

Surface temperature of supersonic wind tunnel model was measured using an infrared thermography technique. To measure the temperature quantitatively, various calibration techniques such as blackbody calibration which converts detected camera signal to temperature, distortion correction due to the camera lens and an imbalance of camera pose, and emissivity calibration which considers viewing angles to the model surface, were employed. Throughout the study, for the quantitative as well as qualitative surface temperature measurement, it was verified that the distortion correction must be considered even for the use of two-dimensional model in aerodynamics testing.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.9-18
• /
• 2011

태양광열 복합 시스템(photovoltaic/thermal hybrid solar system, PV/T)은 태양광 모듈 및 태양열 집열판의 단일화를 통한 전기 및 열에너지의 동시 생산이 가능하도록 구성되고 기존 태양광 모듈의 온도 상승에 따른 효율 저하의 문제점을 보완 및 발생하는 열을 회수하여 온수 생산이 가능한 장치이다. 본 연구에서는 액체형 PV/T 시스템의 대표적인 두 형태인 박스형과 튜브형의 성능 검증을 위하여 수학적 모델링을 통한 두 시스템의 열 및 전기적 성능을 비교 분석하였다. 모델링은 에너지 평형식을 이용하여 시간에 따른 각 부분의 온도의 변화를 예측할 수 있도록 수립되었으며 계산된 결과를 기준으로 전기, 열, 및 전체효율을 도출해 내고, 이를 바탕으로 두 시스템의 성능을 분석하였다. 시뮬레이션 결과를 바탕으로, 박스형 PV/T 시스템의 최고 온수 온도는 $52^{\circ}C$로 예측되었고, 반면에 튜브형은 $48^{\circ}C$에 머물렀다. 또한 열효율은 박스형이 최대 51%, 튜브형이 41%, 전기효율은 박스형이 약 14%, 그리고 튜브형이 13%로 나타났으며, 전체효율은 박스형이 73%, 그리고 튜브형이 64%로 나타나 박스형 PV/T 시스템이 튜브형보다 더 나은 성능을 가지는 것으로 예측되었다. 이는 박스형이 튜브형보다 태양광 모듈과 온수와의 접촉면적이 넓어 더 많은 열전달이 발생하기 때문으로 사료된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1036-1037
• /
• 2017

This study investigated the aging reactions of three kinds of igniters(BKNO3, THPP, ZPP). The life-time of igniter depends on oxygen and moisture in the air. For example, Magnesium contained in the $BKNO_3$ reacts with oxygen and water to form oxide and hydrate. This reaction has an adverse effect on ignition reaction and could be information to analyze aging. Thermodynamic calculation could interpret the aging reaction by calculating flame temperature applying several variables(initial temperature, composition, etc.). If combustion is not completed because of aging igniters, flame temperature will be formed at a low range. The result of this research is expected to support the analysis of igniters aging reactions.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.23-31
• /
• 2017

Numerical study was conducted for the effects of various burner array on the workpiece and the gas temperature in a continuos reheating furnace. Under the same conditions which were the total heat of combustion, the heat capacity of unit burner, the number of burner and burner array were changed to be applied the furnace. The behavior of workpiece temperature and gas temperature in a furnace were evaluated for the effects as function of the changed conditions. A continuous reheating furnace designed for 110 tons/day of production capacity was applied in this study. The furnace which has several gas burners is designed to heat a workpiece. By this study, the better condition was confirmed than the existing designed condition.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.513-519
• /
• 2012

Understanding the behavior of pollutants in the marine environment is essential for coping with the marine pollution problems such as eutrophication. In this study, the effects of environmental parameters on phosphorus release from marine sediment to sea water were investigated. The environmental parameters such as pH in the range of 7 to 9, temperature from 10 to 20C and dissolved oxygen levels (DO) renging 0.7 to 7.0mg/L were examined. Phosphorus release data were taken from batch tests excluding biotic effects, and analyzed using a first-order kinetic model. The effects of environmental parameters were quantified using a statistical methodology. High pH, high temperature, and low DO increased phosphorus release from the sediment to sea water. pH from 7 to 9, temperature from 10 to $20^{\circ}C$, or DO from 7.0 to 0.7 mg/L magnified the equilibrium phosphorus concentration up to 2~3 times.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.303-309
• /
• 1988

The heat generation at the start-up period of an autogeneous single screw extruder was determined with various feed materials, die structure and operational conditions. The highest heat generation rate was observed with defatted soybean meal, while the lowest value was obtained with rice flour, and wheat and barley flour showed the intermediate rate. As the moisture content of the flour decreased and the screw speed increased, the electric power requirement and heat generation rate increased. The temperature at compression section increased with the decrease in the particle size. The same effect was also observed as breaker plate was installed. The optimum operation was established as the temperature profile was maintained in decreasing order of metering section, die and compression section.