• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.427-432
• /
• 1997

감자전분의 수분함량에 따라 가열하는 동안 전분의 점탄성 성질의 변화를 조사한 결과 전분의 농도가 증가할수록 더 높은 storage modulus (G#)와 loss modulus (G@) 값을 보여주었으며, 호화개시온도 및 호화최대값을 나타내는 온도는 전분농도에 따라 낮은 온도로의 이전을 보여주었다. 20%의 감자전분과 옥수수전분을 비교한 결과, 옥수수전분은 $68^{\circ}C$, 감자전분은 $60^{\circ}C$에서의 호화개시온도를 나타내었으나, G#와 G@값은 옥수수전분이 높게 나타났고 이와 같이 서로 다른 호화개시온도, 호화정도 및 그 최대값을 나타내는 온도변화는 아밀로즈/아밀로팩틴의 함량과 전분 입자의 크기에 따른 것으로 여겨진다. 감자와 옥수수 전분을 각각 3%씩 첨가하여 만든 생선단백질 젤의 파손강도를 측정한 결과 전분들을 첨가한 단백질 젤이 무첨가한 젤보다 더 강하게 나타났으며, 옥수수 전분의 첨가가 감자전분 첨가보다 더 강한 젤의 강도를 나타내었다 혼합비를 달리 첨가하여 만든 겔을 응력완화현상을 측정한 결과 감자 및 옥수수 전분을 첨가한 경우는 초기순간응력, 평형응력 뿐만 아니라 전체적인 응력의 증가현상이 일어났으나 3요소 일반화된 Maxwell 모형으로 분석한 결과는 감자 전분과 옥수수전분에 의한 탄성을 (elastic modulus) 상승효과는 첨가농도의 의존성을 보여 주었다.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.692-699
• /
• 2012

The aim of the present study is to explore the possibility of utilizing loess and fly ash as well as activated carbon for the adsorptive removal of PCBs in transformer oil. Here, we investigated the effect of various factors such as temperature (5, 25, 55), contact time (30 min-3 day) and adsorbent does (1, 2.5, 5, 10 g) in detail. It was found that PCBs adsorption rate from transformer oil by activated carbon is more favored than loess at the equilibrium time of 60 minutes. The equilibrium data for both activated carbon and loess is fitted well to the Freundlich isotherm model. The rate constant and activation energy of PCBs adsorption in transformer oil on each adsorbent was analyzed by fitting a kinetic model at 5, 25 and $55^{\circ}C$. From the thermodynamic parameters, the PCBs adsorption process for transformer oil/activated carbon and loess system is spontaneous and endothermic in nature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2898-2903
• /
• 2011

Adsorption/desorption characteristics of low concentration methylethylketone(MEK) and toluene vapors in beds packed with activated carbon fibers(ACF) was investigated. Performance of ACF adsorption was characterized by the equilibrium capacity, time to reach equilibrium and desorption efficiency. Experiments were carried out to define the effect of operation variables, such as feed concentration, flow rate, moisture content and bed height. The breakthrough time was shorten with the increase of temperature, flow rate and feed concentration. In addition, an increase of packed height of adsorbents lengthen the breakthrough time. The ACF loaded with MEK and toluene was satisfactorily regenerated by programed heating. It is observed that MEK is more easily removed than toluene at below temperature of $150^{\circ}C$.

• Clean Technology
• /
• v.7 no.2
• /
• pp.141-149
• /
• 2001

The effects of various factors such as adsorption temperature, interstitial velocity, species and concentration of adsorbates(benzene and toluene) and aspect ratio(L/D) on adsorption characteristics were investigated in a fixed bed with activated carbon. The breakthrough time in a fixed bed was decreased with the increasing of adsorption temperature, interstitial velocity and concentration of adsorbates. The interstitial velocity, concentration of adsorbates and adsorption temperature had influenced considerably upon the MTZ(mass transfer zone) and LUB(length of unused bed) obtained through the breakthrough curves, while aspect ratio(L/D) had smaller effect than former factors. Especially, the concentration of adsorbates among factors have the largest effect on MTZ and LUB. From comparison with the model isotherms, such as the Langmuir, Freundlich and Langmuir-Freundlich, the experimental isotherm data of benzene and toluene agreed farily well to three adsorption isotherm models.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.514-519
• /
• 2017

Adsorption characteristics of acid green 27 dye using activated carbon were investigated as function of adsorbent dose, pH, initial concentration, contact time and temperature. Freundlich isotherm explained adsorption of acid green 27 dye very well and Freundlich separation factors (1/n=0.293~0.387) were found that this process could be employed as effective treatment method. Kinetic studies showed that the kinetic data were well described by the pseudo second-order kinetic model. Pseudo second rate constant ($k_2$) decreased with the increase in initial acid green 27 concentration. Activation energy (10.457 kJ/mol) and enthalpy (79.946 kJ/mol) indicated that adsorption process was physisorption and endothermic. Since Gibbs free energy decreased with increasing temperature, spontaneity of adsorption reaction increased with increasing temperature in the temperature range of 298 K~318 K.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1069-1076
• /
• 2011

All of the satellite components must be operated within the permissible temperature range during the mission in orbit. Therefore, thermal design is performed to develop verified thermal model and to secure thermal stability on the ground. In this study, thermal model correlation was performed to satisfy the criteria of correlation using ground thermal vacuum/thermal balance test results of LEO satellite optical payload. We also secured verified thermal model by controlling operating cycle of flight heaters. In addition, it was confirmed that all components are within the permissible temperature range through conducting orbit environment thermal analysis. We also secured thermal stability of the satellite.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.817-823
• /
• 1990

The sorption characteristics of red pepper powders in terms of mixing ratio of seeds to red pepper powders were investigated at various relative humidities and temperatures as storage conditions. At lower relative humidity below 43% RH, the sorption equilibrium was easily reached regardless of mixing ratio, whereas at higher relative humidity above 75%, the powders gained moisture rapidly, resulting in the color change to brown. At extremely lower RH below 33%, decoloration occurred in red pepper powder. The moisture contents of monolayer value for red pepper powders without seeds were ranging from 5.88% to 7.35% inversely proportional to the temperature. The moisture contents of monolayer value decreased with increase of mixing ratio of seeds.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.13-20
• /
• 1998

A steady-state and dynamic simulation program for a small multi-purpose turboshaft engine with the free power turbine was developed. In order to reduce developing cost, time and risk, a turbojet engine whose performance was well-known was used for the gas generator, and life time was improved by replacing turbine material and by using Larson-Miller curves. The component characteristic of the power turbine was derived from scaling the gas generator turbine. Equilibrium equations of mass flow rate and work were used for the steady-state performance analysis, and the Constant Flow Method(CMF) was used for the dynamic performance simulation. The step fuel scheduling was carried out for acceleration in the dynamic simulation. Through this simulation, it was found that the overshoot of the turbine inlet temperature exceeded over the compressor turbine limit temperature.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.9
• /
• pp.45-52
• /
• 2022

Because discontinuity in the rock mass and contact of soil-structure interaction exhibits coupled thermal-hydromechanical (THM) behavior, it is necessary to develop an interface element based on the full governing equations. In this study, we derive force equilibrium, fluid continuity, and energy equilibrium equations for the interface element. Additionally, we present a stiffness matrix of the elastoplastic mechanical model for the interface element. The developed interface element uses six nodes for displacement and four nodes for water pressure and temperature in a two-dimensional analysis. The fully coupled THM analysis for fluid injection into a fault can model the complicated evolution of injection pressure due to decreasing effective stress in the fault and thermal contraction of the surrounding rock mass. However, the result of hydromechanical analysis ignoring thermal phenomena overestimates hydromechanical variables.

• Analytical Science and Technology
• /
• v.22 no.2
• /
• pp.159-165
• /
• 2009

The thermochromism of fluoran has been examined. The DCF exists as a colorless lactone in aprotic solvents. However, the DCF exists in the form of an equilibrium mixture of a colored zwitter-ion and a colorless lactone in protic solvents. When an acid is added to the solution, the DCF exists an equilibrium mixture as a colorless lactone and a colored cation even in aprotic solvents. In order to understand the interaction between the DCF and the solvent, absorption spectra of the DCF in various solvents were measured. The thermodynamic parameters of the DCF have also been investigated. From the variation of absorbance with temperature, the standard enthalpy changes ${\Delta}H^0$ of the equilibrium between the lactone and the zwitter-ion in various solvents have been determined. The standard enthalpy change ${\Delta}H^0$ is approximately -2.0 kJ/mol in protic solvents. In acidic solution, the standard enthalpy change is measured to be to zero in protic solvents within the experimental error. When the carboxylic group is protonated in acidic solution, a poor interaction between the dye and the solvent is expected.