• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.64-72
• /
• 2017

The performance analysis of the 70 W class LED lighting system suitable for the Middle East environment was performed using the lumped parameter model. The LED light is composed of a heating substrate, a heat pipe, and a heat sink. We divided the LED lights into four objects and applied energy equilibrium to each of them to establish four lumped nonlinear differential equations. The solution of the simultaneous equations was obtained by the Runge-Kutta method. Convective heat transfer coefficients of the lumped model were obtained by multidimensional CFD analysis. As a result of comparison with experiment, it was found that the heating substrate had an error of $1.5^{\circ}C$ and the upper heat sink had an error of $1.8^{\circ}C$ and the relative error was about 0.6 %. Using this model, temperature distribution analysis was performed for normal operating conditions with an ambient temperature of $55^{\circ}C$, with sunlight only, with abnormal operating conditions with sunlight, and without an upper heat sink.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.35-41
• /
• 2001

In this paper, several methods to predict the solder joint shape are studied. Although there are various methods to predict the solder joint shape, such as truncated sphere method. force-balanced analytical solution, and energy-based methods like surface evolver developed by Ken Brakke, we calculate solder joint shape of $\mu$BGA by two solder joint shape prediction methods(truncated sphere method and surfaceevolver) and then compare results of each method. The results indicate that two methods can accurately predict the solder Joint shape in an accurate range. After that, we calculate reliability solder joint shape under thermal cycle test by FEA program ANSYS(version 5.62). As a result, it could be found that optimal solder joint shape calculated by solder joint prediction method has best reliability in thermal cycle test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.141-147
• /
• 2008

This paper describes the design of frequency down converting Mixer in the receiver to use compound semiconductor and CMOS product process. The basic theory and structure of frequency down converting Mixer is surveyed, and we design mixer circuit with active balun which use the compound semiconductor and CMOS process. This mixer convert a single ended signal to differential signal at input port of RF and LO instead of matching circuit to get dual band balanced mixer structure and characteristic broadband. This designed mixer has a conversion gain $-1{\sim}-6[dB]$ at $2{\sim}6[GHz]$ bandwidths. However, the simulation of the designed mixer with active balun has the result of a 7[dB] conversion gain for -2[dBm] LO input power and -10[dBm] input P1[dB] at 5.8[GHz].

• Journal of the Korea Computer Industry Society
• /
• v.5 no.9
• /
• pp.993-1004
• /
• 2004

We propose the method for kinematic and dynamic modeling and Path-tracking of four-wheeled mobile robots with 2 d.o.f having the limited drive-torques. Controllability of wheeled-mobile robots is revealed by using the kinematic model. Instantaneously coincident coordinate system, force/torque propagation and Newton's equilibrium law are used to induce the dynamic model. When drive-torques generated by inverse dynamics exceed the limitation, we make wheeled-mobile robots follow the reference path by modifying the planned reference trajectory with time-scaling. The controller is introduced to compensate for error owing to modeling uncertainty and measurement noise. And simulation results prove that the method proposed by this paper is efficient.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.321-327
• /
• 1996

A back titration method was suggested to determine the exchangeable acidity of soil originated from exchangeable aluminum and adsorbed hydrogen ion in relation to minimizing its titration error. In this method. soils are treated by neutral salt solution whose concentration is the same as soil solution suspended by distilled water. And then. its pH is adjusted at 3, using 1 N HCl solution and back-titrated by 0.1 N NaOH solution containing 1 N NaCl. The results of the suggested back-titration showed the possibility of practical application with linear relationship to that of standard method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.46.1-46.1
• /
• 2010

일반적으로 석출물의 석출은 핵생성(Nucleation)-성장(Growth)-조대화(Coarsening)의 단계를 거친다. 핵생성에 의해 생성된 개개의 핵들은 아직 열역학적으로 평형 상태가 아니다. 석출물의 부피 분율은 아직 상태도에서 예측할 수 있는 값까지 도달하지 못했다. 과포화된 기지에서 생성된 핵은 계속적으로 기지로부터 용질 원자를 공급받아 성장하게 된다. 석출물의 성장은 그 부피 분율이 상태도에서 예상되는 값에 도달할 때까지 계속된다. 시간에 따른 석출 분율 계산과 분산된 석출물들이 matrix내에서 어느 정도 용해도를 갖는다면, 보다 작은 크기의 입자들은 용해되어 보다 큰 입자로 석출(성장)하려는 경향이 있다. 이러한 현상의 구동력은 전체 시스템의 계면 에너지 감소에 의해 주어지며, 결국 하나의 큰 입자만이 존재하게 될 것이다. 본 연구에서는 석출분율을 계산하기 위해 상용프로그램인 Pandat을 통해 Mg-Al 2원계합금의 상태도 및 석출분율 계산을 위한 열역학 데이터를 계산하였다. 계산된 열역학 데이터는 C언어로 함수화 하여 입력하고 Excell을 통해 석출분율을 계산하였다. 계산된 석출분율과 실험값의 비교를 통해 fitting parameters를 대입하여 계산값 및 실험값의 오차율을 줄였다. 본 연구에서 계산된 석출분율은 미래의 석출상 크기 및 분포 등을 개발하는 기초데이터로 활용할 수 있을 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.111-121
• /
• 2007

The paper presents a reliability-based method that can capture the impact of uncertainty of seismic loadings. The proposed method incorporates probabilistic concepts into the classical limit equilibrium and the Newmark-type deformation techniques. The risk of damage is then computed by Monte Carlo simulation. Random process and RMS hazard method are introduced to produce seismic motions and also to use them in the seismic slope analyses. The geotechnical variability and sampling errors are also considered. The results of reliability analyses indicate that in a highly seismically active region, characterization of earthquake hazard is the more critical factor, and characterization of soil properties has a relatively small effect on the computed risk of slope failure and excessive slope deformations. The results can be applicable to both circular and non-circular slip surface failure modes.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.245-250
• /
• 2009

In communications and signal processing area, a number of least mean square adaptive algorithms have been used because of simplicity and robustness. However the LMS algorithm is known to have slow and non-uniform convergence. Various variable step size LMS adaptive algorithms have been introduced and researched to speed up the convergence rate. A variable step size LMS algorithm using the error difference for updating the step size is proposed. Compared with other algorithms, simulation results show that the proposed LMS algorithm has a fast convergence. The theoretical performance of the proposed algorithm is also analyzed for the steady state.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.127-139
• /
• 1996

This paper presents a procedure to recover sea surface heights (SSH) and free-air (FA) gravity anomalies from dense satellite altimeter SSH data with enhanced accuracies over the full spectrum of the gravity field. A wavenumber correlation filtering (WCF) of co-linear SSH tracks is developed for the coherent signals of sub-surface geological masses. Orbital cross-over adjustments with bias parameters are applied to the filtered SSH data, which are then separated into two groups of ascending and descending tracks and gridded with tensioned splines. A directional sensitive filter (DSF) is developed to reduce residual errors in the orbital adjustments that appear as track patterned SSH. Finally, FA gravity anomalies can be obtained by the application of a gradient filter on a high resolution estimate of geoid undulations after subtracting dynamic sea surface topography (DSST) from the SSH. These procedures are applied to the Geosat Geodetic Mission (GM) data of the southern oceans in a test area of ca. $900km\;\times{1,200}\;km$ to resolve geoid undulations and FA gravity anomalies to wavelengths of-10 km and larger. Comparisons with gravity data from ship surveys, predictions by least squares collocation (LSC), and 2 versions of NOAA's predictions using vertical deflections illustrate the performance of this procedure for recovering all elements of the gravity spectrum. Statistics on differences between precise ship data and predicted FA gravity anomalies show a mean of 0.1 mgal, an RMS of 3.5 mgal, maximum differences of 10. 2 mgal and -18.6 mgal, and a correlation coefficient of 0.993 over four straight ship tracks of ca. 1,600 km where gravity changes over 150 mgals.

• Journal of the Korean earth science society
• /
• v.39 no.1
• /
• pp.53-66
• /
• 2018

The information of surface reflectance ($R_{sfc}$) is important for the heat balance and the environmental/climate monitoring. The $R_{sfc}$ sensitivity to error-induced variables for the Geostationary Environment Monitoring Spectrometer (GEMS) retrieval from geostationary-orbit satellite observations at 300-500 nm was investigated, utilizing polar-orbit satellite data of the MODerate resolution Imaging Spectroradiometer (MODIS) and Ozone Mapping Instrument (OMI), and the radiative transfer model (RTM) experiment. The variables in this study can be cloud, Rayleigh-scattering, aerosol, ozone and surface type. The cloud detection in high-resolution MODIS pixels ($1km{\times}1km$) was compared with that in GEMS-scale pixels ($8km{\times}7km$). The GEMS detection was consistent (~79%) with the MODIS result. However, the detection probability in partially-cloudy (${\leq}40%$) GEMS pixels decreased due to other effects (i.e., aerosol and surface type). The Rayleigh-scattering effect in RGB images was noticeable over ocean, based on the RTM calculation. The reflectance at top of atmosphere ($R_{toa}$) increased with aerosol amounts in case of $R_{sfc}$<0.2, but decreased in $R_{sfc}{\geq}0.2$. The $R_{sfc}$ errors due to the aerosol increased with wavelength in the UV, but were constant or slightly decreased in the visible. The ozone absorption was most sensitive at 328 nm in the UV region (328-354 nm). The $R_{sfc}$ error was +0.1 because of negative total ozone anomaly (-100 DU) under the condition of $R_{sfc}=0.15$. This study can be useful to estimate $R_{sfc}$ uncertainties in the GEMS retrieval.