• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.321-330
• /
• 1998

막구조의 초기형상을 결정하기 위하여 막요소의 기하학적 비선형을 고려한 평형방정식을 유도하고, 등장력곡면(equally stressed surface)을 결정하기 위한 알고리즘을 정식화한다. 막구조는 대변형에 의한 기하학적 비선형성을 포함하고, 막구조의 특성상 초기장력에 의한 초기변형을 고려해야 하므로, 본 논문에서는 막구조와 같은 인장구조물의 비선형 수치해석을 수행하기 위한 해석기법으로써, 동적이완법(Dynamic Relaxation Method)에 대한 해석알고리즘을 적용하고, 이 방법에 의해 수행한 해석결과를 검토함으로써 막구조 해석에 적용 가능한 수치해석기법을 제시하고, 수치해석에 대한 예를 통해 본 해석법의 타당성을 검증한다.

• Computational Structural Engineering
• /
• v.4 no.1
• /
• pp.32-35
• /
• 1991

본 고에서는 막구조 해석.설계시의 주요 내용을 각 해석단계별로 간략히 소개하였다. 막구조는 막이론 자신이 가진 근사성, 요소의 탄성 특성의 근사, 막면 요소로 곡면을 나타내는 기하학적 근사 등으로 구조물의 형태, 막재료의 동특성에 따라 해석시 오차가 발생하게 되며, 또한 구조설계 단계에서 막 판넬 제작 및 시공에 대한 고려가 되지 않으면 그 오차는 더욱 크게 된다. 따라서 향후, 보다 정확한 막구조의 설계를 위해서는 섬유직포에 코팅한 막재의 역학적 특성을 보다 잘 표현할 수 있는 막재모델의 정식화, 막재단도 해석시 무장력 상태의 설계곡면을 구하는 방법, 막판넬을 접합하고, 장력을 도입하는 시공과정을 고려한 실초기 평형상태 및 시공과정 해석법에 대한 연구가 계속 되어야 한다. 또한 초기형상 해석에서 시공과정 해석까지 전 설계과정을 공통 Data Base에서 일관 작업이 가능하도록 막구조통합 설계 System의 개발이 필요하다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.106-114
• /
• 2005

This study addresses space simulation test results and thermal modelling verification of HAUSAT-2 nanosatellite STM (Structural-Thermal Model). The thermal modelling of the HAUSAT-2 has been modified in accordance with test results. Thermal analysis results were repeatedly compared with test results for modified thermal modelling. It is verified that the analysis results for modified thermal modelling agree well with test results. Some surface heaters were implemented to simulate solar illumination for HAUSAT-2 Thermal Vacuum/Balance Test. A low-cost and effective thermal test methodology, which is applicable to ultra-small satellite system, was proposed and verified by test results in this study.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.26-31
• /
• 2003

The power loss characteristics of Mn-Zn ferrite were observed with the sintering temperature. In case of $1150 ^{\circ}C$ sintering, the core loss increased with measuring temperature, and does not have minimum value at the point where the magnetocrystalline anisotropy be 'zero'. This reason mainly due to the change of core loss mechanism with grain size which affects residual loss. The grain size and sintered density slightly increased with equilibrium oxygen partial pressure at$ 1150 ^{\circ}C$ sintering. The resistivity and initial permeability showed no significance with atmosphere, these results due to complex effect of $Fe^{2+}$ concentration and microstructure change. The core loss at $100^{\circ}C$ decreased as the equilibrium oxygen partial pressure increased.e increased.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.985-991
• /
• 2008

This paper presents a novel balanced mixer receiver front-end design based on a metamaterial structure applicable to differential-/common-mode excitation. This metamaterial structure functions as a leaky-wave antenna and provides in-trinsic common-mode suppression. Low LO leakage and high RF to LO isolation are achieved without additional filters for LO and RF paths. The metamaterial is based on a unit-cell which under a differential-mode excitation behaves like a composite right/left-handed(CRLH) metamaterial. In contrast, the metamaterial unit-cell is below cut-off under a common-mode excitation. Experimental results are used to verify the proposed metamaterial's differential-/common-mode characteristics. The metamaterial is integrated with a balanced mixer design resulting in an operation frequency range of $1.96{\sim}2.40$ GHz with an optimum mixer conversion loss of 21.1 dB at 2,4 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.608-618
• /
• 2004

In this paper, modifying the diode star double balanced mixer of Maas, a novel resistive 60 GHz pHEMT MMIC star mixer is suggested. Due to star configuration, troublesome IF balun for ring configuration FET mixer is not necessary. In addition, the sysematic design method of dual balun through EM simulation is suggested rather than the design by inspection as Maas. The mixer circuit is fabricated as MMIC on CPW base using 0.1 um GaAs pHEMT Library of MINT in Dongguk University. The size is 1.5 ${\times}$ 1.5 $\textrm{mm}^2$ and its performance is adjustable by DC supply. It can be operated as both up and down converters and it shows the conversion loss of about 13∼18 ㏈ over the full V-band frequencies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.675-691
• /
• 2002

The focus of this work is on the development of large-scale numerical optimization methods for optimal control of steady incompressible Navier-Stokes flows. The control is affected by the suction or injection of fluid on portions of the boundary, and the objective function of fluid on portions of the boundary, and the objective function represents the rate at which energy is dissipated in the fluid. We develop reduced Hessian sequential quadratic programming. Both quasi-Newton and Newton variants are developed and compared to the approach of eliminating the flow equations and variables, which is effectively the generalized reduced gradient method. Optimal control problems we solved for two-dimensional flow around a cylinder. The examples demonstrate at least an order-of-magnitude reduction in time taken, allowing the optimal solution of flow control problems in as little as half an hour on a desktop workstation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.101-108
• /
• 2012

Initial shape analysis for cable-stayed bridges should be able to find optimizated initial cable forces and unstrained length that minimize deflection and bending moments of the deck and pylon. Comparison study of an improved initial force method and TCUD method for determination of initial cable forces in cable-stayed bridges is presented in this paper. For this purpose, an elastic catenary cable element and a nonlinear frame element are firstly described. And concepts and algorithm of two analysis methods are then presented. Finally to demonstrate the validity and the accuracy of two methods, numerical examples for initial state problems of cable-stayed bridges are given and compared based on these methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.339-345
• /
• 2001

In this paper, FG-CPW (Finite-Ground Coplanar Wave-Guide) balanced diode mixer is presented. Frequency bandwidth is selected for a C-band, which is 5.72~5.82 GHz for RF, 5.58~5.68 GHz for LO, and 140 MHz for IF signals. A rat-race hybrid is designed for the accomplishment of single balanced type. A low pass filter (LPF) with CPW structure is used far good conversion loss and unwanted harmonics suppression. When LO signal with the power of 4 dBm at 5.635 GHz is injected, a conversion loss of 6.2 dB is obtained for the mixer. Also, the LO to RF and LO to IF isolation of 30 dB and 40 dB are obtained, respectively. This mixer can be used in the area on wireless LAN application.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.364-369
• /
• 1996