• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.476-479
• /
• 1999

일반적으로 3상 PWM AC/DC 컨버터는 정상상태 에러 제거 및 빠른 과도응답 특성을 얻기 위해 동기 좌표계상으로 모델링하여 제어한다. 그러나 이와 같은 제어기는 입력전압이 평형일 경우를 전제조건으로 하므로, 입력전원이 불평형인 경우 입력전류와 출력전압에 고조파 성분이 나타나게 된다. 본 논문에서는 전원전압을 동기좌표계상의 정/역상 분으로 분석한 후 두 축(D, Q)의 역기전력 보상성분을 전원전압의 상태에 따라 적절하게 가변하고, 무효 전력과 고조파 전력 성분을 선택적으로 제거함으로써 입출력 시스템의 역률 및 고조파 성분을 효과적으로 보상하기 위한 간단하면서도 효과적인 제어기법을 제안하고, 시뮬레이션과 실험을 통하여 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.205-208
• /
• 2001

전류 동기 검출법은 3상이 불평형된 전원 시스템하에서도 전원전류를 평형된 정현파로 보상해 줄뿐 만 아니라 순시전력이론에 비해서 단상에도 적용 가능한 이론이다. 그러나 종전의 전류 동기 검출법은 능동전력필터가 고조파 성분과 기본파 무효성분을 독립 제어하는 하이브리드형 능동전력필터 시스템에는 적용할 수 없다. 따라서 본 연구에서는 불평형 전원 시스템하에서도 비선형 부하전류를 유효성분 기본파 무효성분 그리고 왜형성분으로 분해하여 제어 가능한 확장된 전류 동기 검출법을 제시하였다. 본 연구에서 제시한 방법의 타당성을 입증하기 위해, 불평형 교류 전원하에서 평균전력이론 동기 전류 검출법 그리고 제안된 방법을 실험에 의하여 비교 검토하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.254-260
• /
• 2000

일반적으로 3상 PWM AC/DC 컨버터는 정상상태에서의 효과적인 오차제거 및 빠른 과도응답 특성을 얻기 위해 동기좌표계상으로 모델링하여 제어한다. 그러나 이와 같은 제어기는 입력전압이 평형일 경우를 전제조건으로 하므로, 입력전압이 불평형일 경우 입력전류와 직류링크 전압에 2차 고조파 성분이 나타나게 된다. 본 논문에서는 불평형 입력전압 하에서 컨버터 시스템의 입력전류와 직류링크 전압에 발생하는 2차 고조파 성분을 최소화하기 위한 새로운 제어기법을 제안하였다. 입력측 역기전력 성분으로 간주할 수 있는 동기좌표계상의 전압을 입력전압의 상태에 따라 변동하였으며, 전류지령치를 무효전력과 2차 고조파 유효전력을 선택적으로 제거하도록 선정하였다. 입력전압의 분석은 동기좌표계상에서 수행되어지며, 각 상의 위상과 진폭의 검출이 불필요하다. 제안한 제어기법은 매우 간단하며 불평형 입력전압 상태에서 입출력 시스템의 고조파 왜란을 효과적으로 제어할 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1934-1939
• /
• 2006

Current digital communication system is selecting very various digital Modulation way. Need linear power amplifier necessarily to reduce interference for contiguity channel maximum in this communication system and at the same time, power amplifier of high efficiency is required. In this paper Compare with result of equilibrium power amplifier that design Doherty power amplifier of way that linearity and efficiency are improved at the same time through simulation optimization techniques and at the same time design through simulation, efficiency 20% linearity showed 10dB that is improved.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.286-293
• /
• 2001

Recently, as the power demand grows, the concern on the Energy Storage System (ESS) is being increased. Among the various type of ESS, it is revealed that the Battery Energy Storage System (BESS) is the most economic and applicable. In this paper, the operating algorithm of the BESS including the solution of the power quality problem is studied. The BESS is connected to the power system in parallel, and the functions of the reactive power suppression and the harmonics and unbalanced current elimination, are added to the functions of the BESS. Through the computer simulations and experiments, the functions of the proposed algorithms are verified.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.11a
• /
• pp.155-156
• /
• 2010

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1335-1340
• /
• 2003

In this paper, a single balanced diode Mixer for the homodyne FMCW radar to detect distance and velocity of a vehicle target is designed and implemented using a microstrip line and two schottky barrier beam lead diodes. This mixer is optimally designed to have less a conversion loss within the 100 MHz bandwidth with a little LO injection power and a higher LO isolation as soon as possible through the embedded electrical length of microsrtrip line placed between the coupler and diode matching, considering together LO matching condition. The measured results show 6 dB of conversion loss, 23 dB LO/RF isolation and 3 dBm of input 1l dB, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.65-70
• /
• 2004

This paper presents a novel linearization scheme for a nonlinear RF amplifier It is based on the amplitude modulation with envelope signal. The 3rd order distortion generator is composed of two FETs and it adopts a balanced structure for the purpose of main carrier cancellation. The amplitude and phase of the IM3 component can be controlled at RF band. This predistorter is implemented and tested at the KOREA PCS Tx. band (1840∼1870MHz). Experimental results of two-tone test show that the IM3 cancellation is achieved about 30-40 ㏈ for the wide dynamic range. The adjacent channel power ratio is improved by over 10 ㏈ at the broad-band CDMA signal with a peak to average power ratio of l0㏈, and this improvement is maintained through a wide range of output power levels.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.310-317
• /
• 2007

In this paper, the system equation for the balanced two-phase induction motor is derived and the characteristics for speed control is also analyzed in the region of constant torque and constant power. The modified vector control theory is applied to two-phase motor drive system. The speed of two-phase motor drive can be controlled precisely by the modified indirect vector control theory. The modified vector control theory is simpler comparing to the conventional vector control because of the simpler axis transformation. The computer simulations and the experimental results presented to confirm the vector control for two-phase inverter fed two phase induction motor system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.258-264
• /
• 2004

In this paper, MMIC double balanced star mixer for 40 ㎓ was implemented on GaAs substrate with backside vias. In the design of the MMIC mixer, the design of balun and diode was required. A novel balun structure using microstrip to CPS was presented. The 40 ㎓ balun was designed based on the design experience of the scale-down balun by 2 ㎓. The balun may be suitable for fabrication in MMIC process with backside via and can easily be applied for DBM(Double Balanced Mixer). A Schottky diode was designed and implemented using p-HEMT process considering the compatability with other high frequency MMIC's fabricated on p-HEMT base process. Finally, the double balanced star mixer was fabricated using the balun and the p=HEMP Schottky diode. The measured performance of mixer shows 30 ㏈ conversion loss at 18 ㏈m LO power. This insufficient performance is caused by the unwanted diode at AlGaAs junction in vertical structure of p-HEMT. If the p-HEMT's gate is recessed to AlGaAs layer, and so the diode is eliminated, the mixer's performances will be improved.