• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.298-311
• /
• 1991

빈 시스템에서 적정 팬을 선정하기 위해서, 빈에서 벼를 건조 혹은 통풍시킬 때 벼의 저항에 의해 발생되는 공기의 압력손실을 예측하는 모델을 개발하였다. 또한 벼의 건물 손실을 예측하기 위하여 벼의 호흡 모델을 개발하였다. 그리고 온도 및 습도 센서들을 이용한 자동계측 시스템을 사용하여 저장된 벼의 상태를 연속적으로 측정, 분석함으로써 벼의 통풍기준을 결정하고 이를 근거로 빈의 자동통풍 시스템을 개발하여 평가하였다. 공기의 정압 손실은 공기의 속도 및 벼의 함수율의 함수로서 나타내어졌으며, 일정 곡물 깊이에서 벼의 함수율이 낮을수록 그 정압손실은 증가하였다. 벼의 호흡에 의해 발생되는 이산화탄소의 양은 저장온도, 벼의 함수율, 저장 기간의 함수로서 나타낼 수 있었다. 벼의 안전 저장을 위해 곡물의 온도 및 함수율, 평형상대습도, 벼의 품질저하지수(deterioration index)에 대한 자동통풍 기준을 결정하였으며 이들을 이용해서 퍼스널 컴퓨터로 팬, 제습기 등의 통풍 장치들을 자동제어하는 자동통풍 시스템을 개발하였다. 이 시스템은 곡물의 상태를 예측, 제어함으로써 14% 이하의 함수율과 4이하의 품질저하지수, 그리고 어떤 균류도 생성시키지 않음으로써 벼를 안전하게 저장할 수 있었다.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.39-43
• /
• 2010

It is hard and complex to analytically derive a volumetric displacement formula of a gerotor hydraulic motor because geometric shape of its rotors is complicate. An analytical method about the volumetric displacement is proposed in this work, which is relatively easy and based upon two physical concepts. The first one is energy conservation between hydraulic input energy of the motor and mechanical output energy. The second concept is torque equilibrium with respect to inner and outer rotors. The proposed formula about the volumetric displacement is verified by comparing an analytical displacement and a numerical displacement for an example specification of the motor. The numerical displacement is calculated through a kind of CAD technology. The analytical formula can be utilized in analysis and design of hydraulic gerotor motors.

• Journal of Drive and Control
• /
• v.14 no.3
• /
• pp.1-7
• /
• 2017

Energy consumption of conventional hydraulic excavators controlled by MCV is considerable when negative load is applied because the meter orifice and meter-out orifice are machined in one spool. Therefore, IMV is introduced to save energy use of hydraulic excavators, but existing hydraulic excavators have various advantages so it is difficult to make a clear comparison. In this study, we compare the use of an existing MCV excavator that has many advantages such as negative control, and IMV for boom up and down operation, and if IMV is used to save energy, we will examine the cause. If possible, for comparability under the same conditions, both systems use pressure balance valves to minimize power consumption when not using power in the actuator. The orifice area at each notch of each valve is calculated, and energy saving is verified by comparing the two systems through simulation.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.13-22
• /
• 2008

For the accuracy correction of the micro-positioning industrial robot, micro-manipulator has been devised. The compliant mechanisms using piezoelectric actuators is necessary geometrically and structurally to be developed by the optimization approaches. The overall geometric advantage as the mechanical efficiencies of the mechanism are considered as objective functions, which respectively art the ratio of output displacement to input force, and their constraints are the vertical notion of supporting leg and the structural strength of manipulation. In optimizing the compliant mechanical amplifier, the sequential linear programming and an optimality criteria method are used for the geometrical dimensions of compliant bridges and flexure hinges. This paper presents the integrated design process which not only can maximize the mechanism feasibilities but also can ensure the positioning accuracy and sufficient workspace. Experiment and simulation are presented for validating the design process through the comparisons of the kinematical and structural performances.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.195-202
• /
• 1995

This paper presents the calculating method of optimum correction mass within permissible vibration limits for rotating machinery in two-plane field balancing. Basic technique of this method based on influence coefficient method, is graphic vector composition that the resultant of two influence vectors obtained by trial mass have to be equilibrium with initial vibration vector in the each correction plane. Genetic algorithm which is a search algorithm based on the mechanics of natural selection and natural genetics is used for vector composition, and SUMT method is used to objective function which seeks optimum correction mass for balancing a rotor.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.117.1-117
• /
• 2003

새송이 버섯은 맛과 향이 좋고 영양적으로 우수하여 성인병 예방과 개선 효과가 있다고 알려져 있으나 재배농가의 급증으로 인한 가격하락과 집중출하로 신선도의 하락 등이 문제가 되고 있어 새송이 버섯의 활용성을 향상시키고, 소비자의 기호를 충족시킬 수 있는 버섯류 가공품 개발이 요구되고 있다. 전통절임식품을 응용한 새로운 버섯류 장류절임 가공법을 개발하기 위하여 절임 전 처리에 따른 품질특성을 비교하였으며, 이를 위하여 먼저 절임 전처리 조건으로 블랜칭처리, 적정 염농도와 처리시간 및 탈염법을 개발하고 건조 등의 전처리에 따른 품질 평가는 수분함량, 염도, 색상, 조직감, 관능특성 등을 평가하였다. 새송이 버섯을 전처리하기 위한 블랜칭 처리조건은 7$0^{\circ}C$에서 10분간 처리한 구가 조직감이 우수하고 갈변이 적었으며 염 침지시간은 침지 72시간까지는 증가하였으나 그 이후로는 증가하지 않았고 4$0^{\circ}C$에서 탈염하는 것이 가장 우수하여 전처리 조건으로 선정하였다. 전처리 방법에 따른 중량변화는 블랜칭 처리가 약 10% 정도 중량이 더 많았으며 이 영향은 건조 후에도 지속되었다. 수분함량도 블랜칭 처리가 높았으며 염도 또한 건조 처리에 따라 높은 함량을 보였으나 블랜칭 처리를 병행했을 경우 낮은 값을 나타내었다. 조직의 강도는 무처리에 비하여 전처리를 함에 따라 많은 힘이 소요되어 질긴 조직 특성을 나타냄을 알 수 있다. 관능평가 결과 블랜칭 처리를 단독으로 실시한 B(B)처리구가 관능적 특성치 모두 높은 값을 보여 전처리 방법으로는 가장 우수한 전처리 방법임을 알 수 있었다.저온 장시간 처리한 경우에 비하여 낮은 수준이지만 약간의 증감 경향을 보이다가 고른 평형 상태를 유지하였다. 산소 농도는 저온 장시간 처리 직후 급격히 저하된 후 다시 증가하였으며 저장 7일 후에는 4$0^{\circ}C$ 3시간 처리구를 제외하고는 평형 상태를 유지하였다. 고온 단시간 처리구의 경우 처리 직후부터 저장 7일 후까지 고른 평형 상태를 유지하였다. 에틸렌의 경우 저온 장시간 처리구는 처리 직후 그 농도가 급격히 상승하였다가 저장 1일 후부터 대조구보다 낮은 값을 나타내었다. 고온 단시간 처리구의 경우 저온 장시간 처리구와는 달리 저장 1일 후부터 그 농도가 다소 상승되었다가 다시 감소는 경향을 보였다. 한편 열처리하여 냉각시킨 직후 및 저장1주 후 사과의 pH, 산도, 당도, 경도, 과육의 갈변도 등을 조사하였던 바 대조구 및 처리구간에 일부 항목에 있어서는 약간의 차이를 나타내었다. 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻

• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.50-57
• /
• 1993

Abstract The sintering behavior of the mechanically alloyed AI-8wt%Fe power during vacuum hot pressing was investigated and high temperature deformation behavior of the sintered specimen was studied through compression tests at various strain rates in the temperature range between 35$0^{\circ}C$ and 45$0^{\circ}C$. In 'addition, thermal stablity of the sintered specimem was examined by hardness measurement after annealing the spcimem for 60 hours in the temperature range of 30$0^{\circ}C$ ~50$0^{\circ}C$. The compressive stress increased rapidly with strain and reached the maximum point at the strain about 3%. With slight decrement after reaching the maximum point, the flow stress became constant up to the strain of 30% and it was considered to be due to equilibrium between work hardening and dynamic recrystallization. The hardness of the 60 hrs annealed specimens began to decrease rapidly at 40$0^{\circ}C$ .

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.10
• /
• pp.1489-1497
• /
• 2003

Aerosol charge neutralizers with various radioactive sources have been used to apply an equilibrium charge distribution to aerosols of unknown charge distribution. However, the performance of aerosol charge neutralizers is not well known, especially for highly charged particles. Measurements of highly charged particles are needed in air cleaning devices, e.g. electrostatic precipitator, bag filter with a pre-charger, and electrical cyclone. In this study, the particle charging characteristics of two different aerosol charge neutralizers were experimentally investigated for singly charged monodisperse particles and highly charged polydisperse particles. One has radioactive source of $^{85}$ Kr (beta source, 2 mCi) and the other has $^{210}$ Po (alpha source, 0,5 mCi). The air flow rate passing through each aerosol charge neutralizer was changed from 0.2 to 2.5 L/min. The results show that the charge distribution of singly charged monodisperse particles passing through the $^{85}$ Kr aerosol charge neutralizer is well agreed with the Boltzmann equilibrium charge distribution at an air flow rate of 0.3 L/min, However, it deviates from the equilibrium charge distribution when the air flow rates are 0.6, 1,0, and 1,5 L/min, On the other hands, the effect of air flow rate is insignificant for the $^{210}$ Po aerosol charge neutralizer. The non-equilibrium character in charge distribution of highly charged polydisperse particles passing through the $^{85}$ Kr aerosol charge neutralizer greatly depends on the air flow rate, however it is insensitive to the air flow rate for the $^{210}$ Po aerosol charge neutralizer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1172-1182
• /
• 2002

In the present study a general criterion for local thermal equilibrium is presented in terms of parameters of engineering importance which include the Darcy number, the effective Prandtl number of fluid, and the Reynolds number. For this, an order of magnitude analysis is performed for the case when the effect of convection heat transfer is dominant in a porous structure. The criterion proposed in this study is more general than the previous criterion suggested by Carbonell and Whitaker, because the latter is applicable only when conduction is the dominant heat transfer mode in a porous medium while the former can be applied even when convection heat transfer prevails. In order to check the validity of the proposed criterion for local thermal equilibrium, the forced convection phenomena in a porous medium with a microchanneled structure subject to an impinging jet are studied using a similarity transformation. The proposed criterion is also validated with the existing experimental and numerical results for convection heat transfer in various porous materials that include some of the parameters used in the criterion such as a microchannel heat sink with a parallel flow, a packed bed, a cellular ceramic, and a sintered metal. It is shown that the criterion presented in this work well-predicts the validity of the assumption of local thermal equilibrium in a porous medium.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.843-851
• /
• 2015

Among various ammonium salts and metal ammine chlorides used as solid materials for the sources of ammonia with solid SCR for lean NOx reduction, magnesium ammine chloride was taken up for study in this paper because of its ease of handling and safety. Lab-scale synthetic method of magnesium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%). To understand material characteristics for lab-made magnesium ammine chloride, DA, IC, FT-IR, XRD and SDT analyses were performed using the published data available in literature. From the analytical results, the water content in the lab-made magnesium ammine chloride can be determined. A new test procedure for water removal was proposed, by which the adsorption rate of lab-made sample was found to be approximately 100%.