• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.337-344
• /
• 2016

In this study, a form-finding method of tensegrity systems by using the force density method combined with the stiffness matrix method was presented. Numerous studies have been made on form-finding methods of the tensegrity systems. However, these methods are limited in the tensegrity systems with multiple null space of the equilibrium matrix. The proposed method can uniquely define a single integral feasible set of force densities for the structures. In order to draw maximum natural frequency that can lead a maximum stiffness of the tensegrity systems, a constrained maximization problem is formulated in the genetic algorithm. Several numerical examples are presented to prove dfficiency in searching for self-equilibrium congifurations of tensegrity systems with multiple self-stress states. A good performance of the proposed method has been shown in the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1852-1861
• /
• 1999

In this paper, CDMA Reservation ALOHA scheme which can reduce multiple access interference and packet collision is proposed to support multi-traffic such as voice and random data with and without priority. In this scheme, the time slot is divided into two stage, access and transmission stage. Only packets with spreading codes assigned from base station in access stage can transmit their packets in transmission stage, so MAI can be reduced. To reduce packer collision in access stage, the code reservation and access permission probability are used. Code reservation is allowed for voice traffic and continuous traffic with priority using piggyback and access permission probability based on the estimation of the number of contending users in the steady-state is adaptively applied to each traffic terminal. Also, we analyzed and simulated the numerical performances required for each traffic using Markov chain modeling in a single cell environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.239-244
• /
• 2004

In this paper, we have developed a frequency mixer which can be used as a microwave phase conjugator in the LS band retrodirective antenna system. The mixer as a phase conjugator must have an If signal of which frequency is nearly as high as that of an RF signal, so this fact brings difficulty in the combination of input signals and the design of impedance matching circuit. The circuit configuration is chosen to be of the gate mixer using a pseudomorphic HEMT device. The operating frequencies are 4.00 ㎓, 2.01 ㎓, and 1.99 ㎓ for LO, RF, and IF, respectively. Conversion gain is measured to be 12.5 ㏈ and 1 ㏈ compression point -34 ㏈m at the LO power of -7 ㏈m. The mixer fabricated in this research is the single-ended type, where RF leakage signal appears inevitably at the If port because RF and If frequencies are almost the same. The circuit topology suggested here can be applied directly to the design of balanced-type mixers and phase conjugators.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.1 s.34
• /
• pp.73-83
• /
• 1998

Considering dynamic behaviors according to initial tension forces, geometric nonlinearity and the effect of higher eigen modes to participate in dynamic behaviors increase as initial tension forces decrease, and from phase portrait we can realize that period attractors are produced in many area with complexity. If initial tension forxes increase, difference between linear and nonlinear solutions will decrease and the first eigen mode dominate the dynamic behaviors and observing phase portrait, period attractors appear in certain area regularly. These results may offer meaningful informations to nonlinear dynamic analysis using modal reduction methods such as Lanczos modal analysis. And actually nonlinear dynamic analysis needs very large computational efforts. So, if we determine the number of eigen modes to take part in modal analysis corresponding to initial tension forces we will get more accurate data close to exact nonlinear dynamic solutions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.145-145
• /
• 2012

일반적으로 식생하도에서는 다양한 흐름저항 발생으로 인해 통수능은 감소하고 홍수위는 증가할 수 있다. 식생하도 흐름해석을 위해서는 복합적으로 발생하는 흐름저항이 합리적으로 산정되어야 한다. 하도 흐름에 식생을 고려하는 중요한 관점 중 하나는 식생높이에 대한 수심의 비이다. 본 연구에서는 수심이 식생높이보다 큰 즉, 침수식생 조건에서 식생층의 평균유속 산정식을 제시하고자 하였다. 문헌조사 결과 식생층의 평균유속 산정 방법은 크게 두 가지로 구분되었다. 첫 번째는 흐름을 정상, 등류로 가정하고 전 수심에 대한 힘의 평형을 해석하는 것이고(Stone and Shen, 2002), 두 번째는 2층 구조로 분리하여 식생층과 표면층사이에서 발생하는 전단력을 힘의 평형에 포함시키는 것이다(Baptist et al., 2007; Huthoff et al., 2007; Yang and Choi, 2010). Stone and Shen(2002)의 경우 일부 유속을 과대 산정하는 결과를 보였고, 이는 층간 전단력이 무시되었기 때문이다. 따라서 본 연구에서도 2층 구조론을 이용하였다. 그러나 식생의 밀도가 증가하게 되는 경우 식생이 차지하는 부피는 증가하는 반면, 바닥 전단력의 영향은 감소하게 되므로 식생의 부피는 고려하되 바닥 전단력은 무시하였다. 본 연구를 통해 제시한 식생층 평균유속식을 기존 연구의 수리모형실험 결과와 비교한 것은 <그림 1>과 같다. 비교적 일치하는 결과를 보였지만 Dunn et al.(1996), Rowinski et al.(2002)의 실험결과에 대해서는 유속을 과대 산정하는 것으로 나타났다. 이 들 실험조건의 특징은 침수비가 모두 2.0보다 작다는 것이다. 따라서 침수비 조건에 따라 전단력 ${\tau}_i$의 영향이 있는 것으로 판단된다. 본 연구에서는 침수비 2.0을 기준으로 이보다 낮은 침수비에서는 전단력 ${\tau}_i$를 무시하고, 2.0이상에서는 ${\tau}_i$를 고려한 침수식생하도 식생층 평균유속 산정식을 제시하였고 수리실험결과와 비교한 결과 <그림 2>와 같이 수용할 만한 결과를 얻었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.175-181
• /
• 2010

The three truss models(equilibrium truss model, Mohr compatibility truss model, and the soften truss model) based on a rotating angle is called the rotating-angle model. The three rotating-angle models have a common weakness: they are incapable of predicting the so-called "contribution of concrete". To take into account this "contribution of concrete", the modern truss model(MCFT, STM) treats a cracked reinforced concrete element as a continuous material. By combining the equilibrium, compatibility, and the softened stress-strain relationship of concrete in biaxial state, MTM is capable of producing the nonlinear analysis of reinforced concrete structures composed of membrane element. In this paper, an efficient algorithm is proposed for the solution of proposed model incorporated with failure criteria. This algorithm is used to analyze the behavior of reinforced membrane element using the results of Hsu test.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.83-92
• /
• 2018

The lapse of time may cause in the slope structure various deterioration phenomenon progresses in the ground of slope, and collapse due to deterioration of strength, resulting in a decrease in the service life. The approach to slope stability due to the ground deterioration is a different concept from the existing limit equilibrium analysis, which is limited to the physical characteristics and geometrical structure of ground. In this study, we conducted a comparative analysis of various literature studies related to the slope failure characteristics and behaviors to presented the optimal formulas for shear strength reduction, such as the exponential function, the logarithmic function and the inverse hyperbolic function. And then a case study was performed on cut slope of Gyeongbu High Speed Rail construction site along the Yangsan fault zone, where the slope failure of shale layer vulnerable to deterioration occurred. As a result, it was confirmed that landslide occurred due to reduction of shear strength by deterioration, as safety factor is approx. 1.0 at the time when the slope failure occurred. Based on the comprehensive case study, as a quantitative approach to the evaluation of slope stability due to deterioration of ground, finally we propose a method for evaluating slope stability with optimal strength reduction curves.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.583-590
• /
• 2016

This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.495-508
• /
• 1999

변형된 라이저의 단위 접선벡터상의 운동학적 제약조건을 적용하여 심해저 라이저의 비선형 동적해석을 행한다. 이 조건의 적용으로 자유도수를 감소시킬 수 있으며 심한 비선형성으로 인한 해의 발산 가능성을 제거할 수 있다. 라이저의 거대변형으로 인한 기하학적 비선형성과 비선형 경계조건이 고려된다. 또한, 비선형성이 포함되는 수동학적 하중이 조류와 파랑에 의해 발생하여 내부에 정상류가 흐르는 라이저관의 외벽에 작용하게 된다. 이 외에도라이저 자체의 축방향 변형조건을 고려한다. Galerkin의 유한요소 근사화와 시간증분자를 적용하여 유한요소에 대한 평형 메트릭스 방정식을 유도하고, 수치해석을 위한 알고리즘을 제안하며 API 보고서의 결과와 비교함으로써 제안된 모델이 검증된다. 또한, 기하학적 비선형성으로 인한 영향을 조사하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.61-68
• /
• 2000

In general, the design of membrane structures takes three steps. The first is shape finding analysis which is determination of initial equilibrium geometry with uniform stresses. The second step involve the computation of the stress-deformation to get completed membrane under various load conditions. The third step is to divide the membrane structures into several plan strips from the initial equilibrium states. This procedure is needed because of the initial shape has usually undevelopable curved surface and is called as "cutting patterns generation". By introducing this work, the deformation due to the initial stress is removed and approximate cutting patterns are generated. In this approach, however, material properties is not considered, therefore the error between the design stresses and actual stresses during the fabrication of plan strips should be occurred. In this paper, actual equilibrium shape analysis procedure for HP shape models is presented. The deviations of stresses between the design stresses and actual stresses are estimated.