• Title/Summary/Keyword: 평행류 유동 형상

Search Result 4, Processing Time 0.02 seconds

Performance Characteristics of PEMFC by flow Configurations and Operating Condition (유로형상 및 운전조건에 따른 고분자 전해질 연료전지의 성능 특성)

  • Lee, Pil-Hyong;Cho, Son-Ah;Han, Sang-Seok;Hwang, Sang-Soon
    • Proceedings of the KSME Conference
    • /
    • 2007.05b
    • /
    • pp.3440-3445
    • /
    • 2007
  • For proton exchange membrane fuel cell, it is very important to design the flow channel on separation plate optimally to maximize the current density at same electrochemical reaction surface and reduce the concentration polarization occurred at high current density. In this paper, three dimensional computation model including anode and cathode domain together was developed to examine effects of flow patterns and operation conditions such as humidity and operating temperature on performance of fuel cell. Results show that voltage at counter flow condition is higher than that at coflow condition in parallel and interdigitated flow pattern. And fuel cell with interdigitated flow pattern which has better mass transport by convection flow through gas diffusion layer has higher performance than with parallel flow pattern but its pressure drop is increased such that the trade off between performance and pressure drop should be considered for selection of flow pattern of fuel cell.

  • PDF

Vertical Convection Flow around V-Shaped Structures in Uniform Current (조류 중에 놓인 V-형 구조물 주위의 연직순환류에 대한 연구)

  • Yang, Chan-Kyu;Hong, Keyyong
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.34 no.4
    • /
    • pp.148-157
    • /
    • 1997
  • In this paper, the flow around a V-shaped plate positioned against horizontal flow is numerically simulated by using finite volume method and experimentally visualized in two dimensional tank by dye injection method. The upwelling flow artificially induced by V-shaped plate mixes the stratified stagnant flow. It can be applied to mitigate the eutrophication and stratification of sea in the vicinity of offshore structures.

  • PDF

On Numerical Simulation of Salt-Water Wedge in Coastal Aquifer (해안 대수층의 해수침투에 관한 수치적 고찰)

  • Lee, Woo-Dong;Hur, Dong-Soo;Jeong, Yeong-Han
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.82-82
    • /
    • 2015
  • 해안 대수층은 해수와 담수가 공존하는 지역으로 상대적으로 밀도가 큰 해수가 대수층의 담수 아래에 쐐기형태로 존재하게 된다. 이러한 쐐기형태의 해수와 담수의 경계면은 압력경도의 평형에 의해 경계면이 유지되며, 해수면 또는 지하수위가 변동할 경우 해수-담수 경계면의 균형이 무너짐과 더불어 압력경도의 평행이 이루어질 때 까지 해수-담수 경계면의 이동이 계속 진행된다. 수위 변화의 주요 원인으로는 지구온난화 및 기후변화로 인한 지속적인 해수면 상승과 도서지역의 인구증가 및 산업화로 인한 무분별한 지하수의 사용 등에 의한 지하수위 저하 등을 꼽을 수 있다. 이와 같은 원인으로 해안 및 도서지역에서는 해안 대수층의 해수침투거리가 증가하여 지하수 이용에 큰 어려움을 겪고 있다. 이에 해안 대수층의 해수침투 범위 및 거리를 추정하기 위한 많은 연구들이 다양한 분야에서 지속해서 이루어지고 있지만, 서로 밀도가 다른 해수와 담수가 공존하는 해안 대수층 내의 수리특성을 명확히 파악하기에는 아직까지 미흡한 점들이 많다. 과거에는 Darcy의 법칙 및 Ghyben-Herzberg 식에 근거한 이론적인 연구들이 주로 이루어졌고, 근래에 현장관측이나 수리모형실험이 국내 외적으로 수행되고 있으나, 모든 영역의 지하수의 특성을 조사하는 것이 사실상 불가능하다. 이에 최근에는 컴퓨터 성능의 비약적인 발전과 더불어 다양한 수치해석방법에 의한 수치모델들이 개발되어 시뮬레이션에 적용되고 있다. 하지만 거의 대부분의 수치모델은 해안 대수층 수리특성을 투수계수에 의존하고 있을 뿐, 대수층 내부의 해수-담수에 의한 밀도류의 유동특성을 전혀 고려하지 못한 채 정수압에 근거한 해수-담수 경계면에 대해 모의하고 있는 정도이다. 따라서 본 연구에서는 해안 대수층 내부의 유동현상을 투수계수에 의존하는 방법에서 탈피하여 대수층 매체의 입경, 공극, 형상 등을 고려할 수 있을 뿐만 아니라, 염분 및 온도차에 의한 밀도류를 해석할 수 있는 강비선형 수치모델을 개발하여 해수침투 현상을 직접 모의한다. 나아가 대부분의 이전 연구들에서 간과하고 있는 해안지역의 대표적 물리력인 파랑과 조석의 영향이 해안 대수층의 해수침투에 미치는 영향, 해안 대수층의 지하수위 및 해수면의 수위차에 의한 해수침투 특성 그리고 이를 제어 할 수 있는 새로운 대응기술을 제안하는 것을 목적으로 한다.

  • PDF

Experimental Investigation on the Droplet Entrainment in the Air-Water Horizontal Stratified Flow (물-공기 수평 성층류 유동조건에서 액적이탈 현상에 대한 실험연구)

  • Bae, Byeong Geon;Yun, Byong Jo;Kim, Kyoung Doo;Bae, Byoung Uhn
    • Journal of Energy Engineering
    • /
    • v.24 no.1
    • /
    • pp.114-122
    • /
    • 2015
  • In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.