• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.5
• /
• pp.193-198
• /
• 2011

Recently sapphire crystals are used in LED applications. The Czochralski (CZ) growth process is one of the most important techniques for growing high quality sapphire single crystal. A successful growth of perfect single crystals requires the control of heat and mass transport phenomena in the CZ growth furnace. In this study, the growth processes of the sapphire crystal in an inductively heated CZ furnace have been analyzed numerically using finite element method. The results shown that the high temperature positions moved from the crucible surface to inside the melt and the crystal-melt interface changed to the flat shape when the rpm was increased. Also the crystal-melt interface shape has been influenced by the shoulder shape of the grown crystal during the initial stage.

• Journal of the Korean Society of Costume
• /
• v.57 no.5 s.114
• /
• pp.1-11
• /
• 2007

The purpose of this study was to analyze and minimize structural error between sample knitting and actual knitting in weft knitting apparel. Basic stitches used in this study were plain stitch, $0{\times}0$ rib stitch, $1{\times}1$ rib stitch, $2{\times}2$ rib stitch, Milan rib stitch. They were knitted into two different gauges(7 and 12 gauge) and 6 different sample sizes by computer program. The weight, length and width of these 5 basic knitting stitches were measured and their changes according to gauge, stitch and knitting were calculated and analyzed. The results were as follows; The weight of $0{\times}0$ rib stitch was the largest, followed by Milan rib stitch, $2{\times}2$ rib stitch, plain stitch and $1{\times}1$ rib stitch. As the density of stitch per unit area increases, the weight increases. The length of $0{\times}0$ rib stitch was the largest, followed by plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch and Milan stitch in both 7 and 12 gauge. As the number of course increases, the length increases accordingly. However, its increase ratio shows higher than that of number of course. It means that the reduction in number of course is needed to get aimed length. The width of Milan rib stitch was the largest, followed by $0{\times}0$ rib stitch, plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch in 7 gauge. In 12 gauge, Milan stitch, plain stitch and $0{\times}0$ rib stitch were the highest, followed by $2{\times}2$ rib stitch and $1{\times}1$ rib stitch. It showed that the change in shape of stitch influenced on the width more than the length of stitch.

• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.492-500
• /
• 2012

In this paper, improved contour region coding method is proposed to accomplish better depth map coding performance. First of all, in order to use correlation between color video and depth map, a structure in SVC is applied to 3DVC. This can reduce bit-rate of the depth map while supporting the video to be transferred via various collection of network. As the depth map is mainly used to synthesize videos from different views, corrupted contour region can damage the overall quality of video. We hereby adapt a new differential quantization method when separating the contour region. The experimental results show that the proposed method can improve video quality by 0.06~0.5dB which translate the bit rate saving by 0.1~1.15%, when compared to the reference software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1759-1771
• /
• 1994

We proposed the iterative image restoration method based on the method of steepest descent with a regularization constraint for restoring the noisy motion-blurred images. The conventional method proposed by Jan Biemond et al, had drawback to amplify the additive noise and make ringing effects in the restored images by determining the value of regularization parameter experimentally from the degraded image to be restored without considering local information of the restored one. The method we proposed had a merit to suppress the noise amplification and restoration error by using the regularization parameter which estimate the value of it adaptively from each pixels of the image being restored in order to reduce the noise amplification and ringing effects efficiently. Also we proposed the termination rule to stop the iteration automatically when restored results approach into or diverse from the original solution in satisfaction. Through the experiments, proposed method showed better result not only in a MSE of 196 and 453 but also in the suppression of the noise amplification in the flat region compared with those proposed by Jan Biemond et al. of which MSE of 216 and 467 respectively when we used 'Lean' and 'Jaguar' images as original images.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.17-26
• /
• 2019

This research aims to obtain useful data on the development of compression garment products with high-stretch knitted materials. Using nylon SCY, four specimens were knitted. Then, appearance (width, length, weight, thickness), stretch property (stretch, recovery) and clothing pressure were measured and their interrelation was analyzed. In the comparison of appearance features, yarn floating caused shrinkage in both course and wale directions of the specimens. Yarn overlapping by tucking caused a release in the course direction and shrinkage in the wale direction. Also, structural change was affected by the weight and thickness change of the knitted fabric. In the analysis of fabric stretch, yarn floating reduced the extension in course direction and increased that in wale direction of the knitted fabric. However, yarn overlapping reduced the elongation in both directions. In the analysis of recovery, yarn floating and overlapping raised fabric recovery in both directions, and tuck structure was superior to float in recovery. In the analysis of clothing pressure, 'Plain-Float' structured fabrics showed a higher clothing pressure than 'Plain' and the clothing pressure value of 'Plain-Tuck' was lower than that of 'Plain'. As for the correlation between fabric appearance, stretch property, and clothing pressure, the appearance change in course direction had a major influence on the clothing pressure. The shrinkage of appearance led to a decrease in stretch and an increase in clothing pressure.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.235-238
• /
• 2009

최근 생활수준의 향상으로 의복의 기능성이 중시되면서, 건강, 감성, 쾌적 등에 대한 욕구를 충족시킬 수 있는 건강 소재 개발에 대한 연구와 니트에 관한 선호도 및 감성연구는 활발히 진행되고 있다. 그러나 현재까지 건강 니트 소재의 감각 및 감성이미지에 관한 연구는 부족한 실정이다. 본 연구는 키토산 섬유와 서스 섬유의 니트 소재를 편성한 다음 최종 소비자의 감각과 감성이미지에 미치는 영향을 연구하여 실제 건강 니트 소재를 기획하는데 필요한 정보를 제시하고자 한다. 본 연구에서 키토산 섬유와 서스 섬유를 회색계열로 변화를 주어 10 게이지의 컴퓨터 자동 횡편기로 5 종의 평편 시료를 편성하였고 20 대 남녀 대학생 69 명을 대상으로 5 종의 시료($20\;cm{\times}15\;cm$)를 랜덤한 순서로 제시하여 눈으로 시료를 보고 직접 만지면서 평가하도록 하였으며, 감각 18 개와 감성 22 개, 선호도 3 개의 총 43 개 형용사로 이루어진 7 점 척도를 사용하였다. 건강 니트 소재의 감각 및 감성 이미지를 요인 분석한 결과, 감각요인은 '부피감', '요철감', '신축감', '현시감', 변형감'의 5 가지 요인, 감성요인은 '온유감', '안정감', '고급감', '활동감'의 4 가지 요인으로 분류되었다. 색 속성 중 명도 수준별 감각요인 및 감성요인 중 '요철감'과 '안정감'의 매우 유의한 차이가 나타났다. 고명도, 저명도 수준은 울퉁불퉁하고 오톨도톨하지만 안정적이고 깨끗한 이미지로 느끼는 것으로 나타났고 중간 명도수준은 '요철감'과 '안정감'이 감소되었다. 차콜색의 키토산 100%와 연회씩의 서스 100%의 경우 울퉁불퉁하고 오톨도톨하지만 안정적이고 깨끗한 이미지로 느끼는 것으로 나타났고, 차콜색 키토산섬유와 연회색 서스섬유를 혼방하여 편성한 경우 '요철감'과 '안정감'이 감소되었다.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.202-208
• /
• 1999

Composite cathodes of $50/50\;vol\%$ LSM-YSZ $(La_{-x}Sr_xMnO_3-yttria\;stabilized\;zirconia)$ were deposited onto dense YSZ electrolytes by colloidal deposition technique. The cathode characteristics were then examined by scanning electron microscopy (SEM) and studied by ac-impedance spectroscopy (IS). The conditioning effects on LSM-YSZ cathodes were seen and remedies for these effects were noted in order to improve the performance of a solid oxide fuel cell (SOFC). The effects of temperature on impedance, surface contamination on cathode bonding to YSZ electrolyte, changing Pt paste, aerosol spray technique applied to curved surface on microstructure and cell to cell variability were solved by testing at $900^{\circ}C$, sanding the YSZ surface, using only one batch of Pt paste, using flat YSZ plates and using consistent procedures and techniques, respectively. And then, reproducible impedance spectra were confirmed by using the improved cell and the typical spectra measured for an (air)LSM-YSZ/YSZ/LSM-YSZ(air) cell at $900^{\circ}C$ were composed of two depressed arcs. Impedance characteristics of the LSM-YSZ cathodes were also affected by experimental conditions such as catalytic interlayer, composite cathode compositions and applied current.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.107-112
• /
• 1994

The phase transition and the surface and interface morphologies of $TiSi_2$ formed on atomically clean Si substrates are investigated. 200$\AA$ Ti and 400$\AA$ Si films on Si(ll1) have been codeposited at elevated temperatures (400~$800^{\circ}C$) in ultrahigh vacuum. The phase transition of TiSiL is characterized with using XRD. The results distinguish the formation of the C49 and C54 crystalline titanium silicides. The surface and interface morphologies of titanium silicides have been examined with SEM and TEM. A relatively smootb surface is observed for the C49 phase while a rough surface and interface are observed for C54 phase. The islanding of the C54 phase becomes severe at high temperature ($800^{\circ}C$). Islands of TiSiL have been observed at temperatures above $700^{\circ}C$ but no islands are observed at temperatures below $600^{\circ}C$. For films deposited at $400^{\circ}C$ and 500%. weak XRD peaks corresponding to TiSi were observed and TEM micrographs exhibited small crystalline regions of titanium silicide at the interface.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2015

There are many efforts to mechanize the process for underwater port construction due to the severe and adverse working environment. This paper presents an underwater construction robot to level rubbles on the seabed for port construction. The robot is composed of a blade and a multi-functional arm to flatten the rubble mound with respect to the reference level at uneven terrain and to dig and dump the rubbles. This research analyzes the kinematics of the blade and the multi-functional arm including track and swing motions with respect to a world coordinate assigned to a reference depth sensor. This analysis is conducted interfacing with the position and orientation sensors installed at the robot. A hydraulic control system is developed to control a track, a blade and a multi-functional arm for rubble leveling work. The experimental results of rubble leveling work conducted by the robot are presented in land and subsea. The working speed of the robot is eight times faster than that of a human diver, and the working quality is acceptable. The robot is expected to have much higher efficiency in deep water where a human diver is unable to work.

• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.815-829
• /
• 2010

In this paper, we propose a new $4{\times}4$ intra coding method by unidirectional prediction for improvement of intra-frame coding efficiency of H.264/AVC. There are $4{\times}4$, $8{\times}8$, and $16{\times}16$ intra prediction modes in the current H.264/AVC. For the $4{\times}4$ intra prediction, coding efficiency is achieved by accurate prediction with small block size in relatively complicated regions, and the $16{\times}16$ intra prediction method can predict more accurately compared to $4{\times}4$ intra prediction with only one directional information in relatively homogeneous regions. We propose a unidirectional $4{\times}4$ intra prediction method adopting a small-size prediction and one directional prediction approaches. In order to improve coding efficiency, the proposed method is conducted by $4{\times}4$ block and their prediction directions are all the same, resulting that we need to send only one directional information for each macroblock. For intra-frame coding setting, we achieve 10.47% and 1.57% coding efficiency in BD-bitrate for only $16{\times}16$ intra mode and $4{\times}4$, $16{\times}16$ intra mode, respectively.