• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.610-616
• /
• 1990

The fracture mechanics analysis of surface cracks in plates and cylindrical geometries is important in the integrity evaluation of flawed structural components. The objective of this paper is, thus, to numerically investigate an interaction effect of two surface cracks in plate and cylindrical geometries. The effect of crack spacing on the magnitude of the stress intensity factor(K) is investigated using the line-spring model. For the case of a finite plate under uniaxial loading, the effect of crack spacing on the K values is negligible. However, for the case of a cylinder under moderate internal pressure, a significant increase in K values is observed at the deepest point of the surface crack.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.683-687
• /
• 2007

Hydroelastic deformation of pontoon type floating structure in waves is critical in structural design. Therefore, it is necessary to develop additional technology that make to dissipate the wave energy as the submerged horizontal plate. In this study, we investigate the characteristics of hydrodynamic interaction effect by the submerged plate affecting to the radiation forces on a pontoon type floating structure using numerical analysis. We have developed the numerical method based on the composite grid system that consists of moving and fixed grid to compute the radiation forces due to the heaving motion of pontoon type floating structure and submerged plate. The numerical simulations based on the finite difference method are carried out to solve the fully nonlinear free surface involving the breaking waves and compared with the experimental data to confirm the reliability of the numerical method. Then, we discuss the interaction effects on the hydrodynamic forces that could influence on the hydroelastic response of floating structure.

• Computational Structural Engineering
• /
• v.3 no.4
• /
• pp.105-112
• /
• 1990

A rational and straightforward method is introduced for developing continuum models of large platelike periodic lattice structures based on energy equivalence, The procedure for developing continuum models involves using existing finite element matrices in calculating strain and kinetic energies of a repeating cell. The equivalent continuum plate properties are obtained from the direct comparison of the reduced stiffness and mass matrices for continuum and lattice plates. Numerical results prove that the method developed in this paper shows very good agreement with other well-recognized methods.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.179-188
• /
• 1997

A 4-node element for efficient finite element analysis of plate bending is presented in this paper. This element is formulated based on Mindlin plate theory to take account of shear deformation. To overcome the overestimation of shear stiffness in thin Mindlin plate element, especially in the lower order element, five nonconforming displacement modes are added to the original displacement fields. The proposed nonconforming element does not possess spurious zero-energy mode and does not show shear locking phenomena in very thin plate even for distorted mesh shapes. It was recognized from benchmark numerical tests that the displacement converges to the analytical solutions rapidly and the stress distributions are very smooth. The element also provides good results for the case of high aspect ratio.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.62-73
• /
• 2001

The interest in evaluation of structural intensity arises for practical reasons, because net energy flow distribution offers information of energy transmission path, positions of sources, and sinks of vibration energy. In this paper, structural intensity analysis of local ship structures using finite element method(FEM) is carried out. The purpose of this analysis is to evaluate the relative accuracy according to mesh fineness. The structural intensity of unstiffened and stiffened plates varying their mesh fineness is analyzed and the results are compared with those obtained by the assumed mode method. As results, the proper mesh size in qualitative/quantitative structural intensity analysis of plate structures is proposed. In addition, the propagation phenomenon of vibration energy is investigated for the thickness-varying flat plate, L-type plate, and box-girder structures.

• Proceedings of the KWS Conference
• /
• 1994.05a
• /
• pp.241-242
• /
• 1994

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.794-801
• /
• 2012

Finite Element Method is a strong tool to analyse static and dynamic problem of a structure. FEM is a good method for static problem, but for dynamic problem there are some differences between real phenomena and analyzed phenomena. Therefore some modifications are needed to identify two results. In this paper authors propose a genetic algorithm method 1) to adjust dimensions of plate for identifying natural frequencies, 2) to fit amplitude of FEM Frequency Response Function(FRF) onto it of real FRF. Analysis by raw FEM data gave questions if the results were for the same object. By only adjusting Young's modulus much better accordances were obtained, but limitation existed still. Very good agreements were achieved by shape modification and damping coefficient identification.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.134-141
• /
• 2018

In this paper, the possibility of using an MDF (Mild-detonating Fuse) as a linear separation device is studied. An MDF is a small diameter metal (lead) tube filled with explosives (RDX). Aluminum plate cutting experiments are carried out with different values of target plate thickness and explosives per unit length. Based on the experimental results, a numerical analysis method including the failure criteria is established. The mechanism and characteristics of using MDFs for aluminum plate cutting are identified; the possibility of using the current system as a linear separation device is verified. By utilizing a developed numerical method, the separation reliability for diverse structures and MDFs can be predicted in advance and the number of experiments required for development can be minimized.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.303-307
• /
• 1998

본 논문에서는 고주파수 대역의 진동 전달 현상을 묘사할 수 있는 원형파를 기본 개념으로 한 레이 추적기법(RTM)을 개발하였다. 2차원 원형파를 묘사할 수 있는 레이튜브 개념을 제안하고, 진동 연성경계에서의 입사파, 전달파, 그리고 반사파가 경계조건을 만족하도록 관계식을 유도하였다. 이를 평판 연속 구조물이 고주파수 진동 전달 해석에 적용하여 보았으며, 유사 해석 기법인 SEA 및 파동 인텐시티해석법(WIA)과의 비교를 수행하여 보았다. 그 결과, SEA에 비하여 이론해와 더 잘 맞는 예측 결과를 관찰할 수 있었으며 WIA와 유사한 결과를 보임을 확인할 수 있었다. 본 논문에서 제안된 RTM은 진동전도해석(VCA)과 같이 지역적 정보를 알 수 있는 장점도 가지고 있으며, 2차원 진동구조물의 고주파수 진동 전달 해석시 기존이 SEA 및 WIA를 대체할 수 있는 기법으로 판단된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.383-388
• /
• 2008

A modeling method for the impact analysis of plate structures employing Hertzian contact theory is presented in this paper. Since local deformation as well as bending deflection of the plate occurs due to the collision, it has to be considered for the impact analysis. When the coefficient of restitution is employed for the impact analysis, the local deformation is not considered. For more accurate and reliable impact analysis, however, the local deformation should be considered. The effects of the location of collision and the collision mass on the impact duration time and the contact force magnitude are investigated through numerical studies employing Hertzian contact theory.