• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.131-145
• /
• 1986

흐름수역에서 연직상향으로 방류되는 평면부력\ulcorner의 거동이 연속방정식, 운동량방정식 및 추적물수송식의 기본방정식에 의하여 수치적으로 해석된다. 난류확산에는 Prandtld의 혼합거리이론을 도입한 난류수송모형이 이용된다. 수치해 과정은 기본방정식을 유함수(stream function)식, 와도수송(vorticity transport)식으로 변환한 후, \ulcorner방류속도와, 방류구폭 등으로 표현되는 변수와 흐름을 지배하는 무차원 매개변수를 도입하여 무차원 형태로 표현하는 부분과 successive under-relaxation과 Gauss-Seidel반복법으로 수행하는 부분으로 이루어진다. 적절한 relaxation 계수를 선정하므로써 안정되고 수렴성이 좋은 계산이 수행된다. \ulcorner방류 속도와 가로흐름 속도의 비가 속도비(Velocity ratio)로 정의되며 속도비가 8 - 15의 범위에서 부력\ulcorner으로 인한 주변흐름수역의 속도변화 온도상승범위, 흐름상태(유선) 및 와도가 조사되었으며 \ulcorner의 경로에 대하여 속도비와 방류밀도후르드수의 영향이 또한 조사되었다. \ulcorner중심선의 속도와 온도변화, 국부밀도후르드수의 변화가 구해지며 퍼짐율(dispersion ratio), 확산비(spreading rate)가 방류밀도후르드수, 국부밀도후르드수 및 방류구로부터의 경로의 항으로 해석되었다. 또한 속도와 온도 분포에 상사(similarity)가 존재함이 밝혀졌으며 본 연구와 같은 조건의 범위에서는 Gaussian분포를 이용한 적분형해석(intergal type analysis)이 가능한 것으로 사료된다.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.76-85
• /
• 2011

In this paper, we analysed RSS characteristics by external factors and presented an efficient algorithm for real-time location tracking and its hardware system. The proposed algorithm enhanced the ranging accuracy using Kalman Filter based on the RSS DB. The location tracking system that consists of the tag, AP(Access Point), a data collector(Data Receiver) with IEEE 802.15.4(ZigBee) network environment, and location tracking application that reveal locations of each tag is implemented for the test environment. The location tracking system presented in this paper is implemented with MSP430 microprocessor manufactured by TI(Texas Instrument), CC2420 RF chipset and the location tracking application. With the results of the experiment, the proposed algorithm and the system can achieve the efficiency and the accuracy of location tracking with the average error of 19.12cm, and its standard deviation of 5.31cm in outdoor circumstance. Also, the experimental result shows that exact tracking of position in indoor circumstance cannot achieve because of vulnerable RSS with external circumstance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.3
• /
• pp.172-177
• /
• 2023

In this paper, 2-dimensional backtracking method for ultrasonic signals. Ultrasonic sensors are a common technology used in industrial fields as many studies have been conducted on distance measurement and indoor location tracking using transmission and reception devices in pairs. A method for tracking a signal of an arbitrary ultrasonic transmission device on a 2D plane using only a receiver of an ultrasonic signal is proposed. In order to track the ultrasonic signal, the receiver receives the signal by making at least three. The three receivers may calculate a direction and a distance using a time difference in which the ultrasound reception sound is reached. The existing method of tracking signal sources using ultrasonic waves has a problem of time synchronization of devices because the transceivers must be paired or installed independently for each sensor. In order to solve this problem, the distance of the ultrasonic receiver is minimized, and it is configured as one device. The sensor installed as one device may be processed by one operator, thereby solving the time synchronization problem. To increase time difference accuracy, high-speed 32-bit timers with high time resolution can be used to quickly calculate and track distances and directions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.105-117
• /
• 1994

A finite element procedure which can trace plastic collapse behavior of plane frame structures under small and large deformation is presented. The member is assumed to be prismatic and straight, and has the rectangular or I cross section. For the elasto-plastic analysis, the concept of plastic hinge is introduced and the incremental displacement method is applied. The limit state condition of the plastic hinge is considered under the combined condition of a bending moment and an axial force. Numerical examples are presented in order to demonstrate the validity and efficiency of the proposed procedure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.17-26
• /
• 1990

A solution strategy for geometric non-linear analysis for the plane frame structures subjected to conservative and non-conservative forces is presented. By making efficient combination of the load incremental method and the displacement incremental method, this strategy can find postbuckling configuration such as snap-through and turning-back phenomena which cannot be easily found by the conventional load and displacement incrementation scheme. In the case of the analysis of the framed structure subjected to circulatory non-conservative forces, the total tangent stiffness matrix becomes unsymmetric and when calculating the incremental load and unbalanced load vector components, the direction change of the non-conservative forces is considered. Several example problems to demonstrate the feasibility of the present strategy, over ranges of deformation that are well beyond those likly to occur in practical framed structures, are given and discussed.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.1
• /
• pp.41-48
• /
• 2008

Spatial structure is an appropriate shape that resists external force only with in-plane forte by reducing the influence of bending moment, and it maximizes the effectiveness of structure system. the spatial structure should be analyzed by nonlinear analysis regardless static and dynamic analysis because it accompanys large deflection for member. To analyze the spatial structure geometrical and material nonlinearity should be considered in the analysis. In this paper, a geometrically nonlinear finite element model for plane truss structures is developed, and material nonlinearity is also included in the analysis. Arc-length method is used to solve the nonlinear finite element model. It is found that the present analysis predicts accurate nonlinear behavior of plane truss.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.2
• /
• pp.73-82
• /
• 1998

In order to simulate surface discharged heat dispersion in costal area, a 2-dimensional Eulerian-Lagrangian model for far field and semi-active particle tracking random walk model in near field has been combined. The mass of discharged heat water in near field has treated as particles with buoyancy and this is eventually converted to horizontal additive dispersion in random walk equations. This model is applied to both a simplified coastal geometry and a real site. In simple application it can simulate plume-like characteristics around discharging point than a near field-model, CORMIX/3. Actual application in the Chonsu Bay shows farther spreading of heat water in near field comparing the observed data, and this shows that the developed model might be applied with satisfaction.

• Journal of Convergence Society for SMB
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2014

In this study, we present the investigation results using a 3D radio wave propagation simulator in indoor environments. Previous studies treat only the path loss between the transmitter and receiver in 2D geometry. We provide the simulation results of indoor propagation prediction based on various ITU-R Recommendations. Simulation results compared here indicate that 150MHz and 2GHz frequency bands give quite different characteristics in presented indoor geometry. Since the field intensity is affected by the loss at the wall, the transmitting power level is one of the key factor for receiving power.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1665-1666
• /
• 2006

TFT-LCD(Thin Film Transistor Liquid Crystal Display)는 표시장치로서 실용화된 후 많은 상품에 적용중이다. 그러나, LCD는 자체 발광능력이 없으므로 그후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU는 내부 광원으로 밝기가 균일한 평면광을 만들어 LCD 화면을 균일하게 면조사하는 역할을 한다. LCD가 적용되는 분야중 Note PC에는 광원으로 CCFL(Cold Cathode Fluorescent Lamp)가 적용되어 왔지만, 최근 고휘도, 박형화, 저소비 전력을 달성하기 위해 CCFL로는 한계가 있어 LED(Light Emitting Diode)를 적용한 BLU를 제작하기 위한 연구가 진행되고 있다. 본 연구에서는 점광원인 LED 적용한 LED에 있어서 요구되는 휘도 균일성을 향상시키기 위해서는 LED광원이 적용된 BLU의 외관 품질 향상을 위한 도광판 입광부 구조 최적화를 광추적 Simulation을 통해 예측하고 향상시킬 수 있는 구조를 제안한다. Simulation결과, 외관품질 개선을 위해 도광판 입광면에 130도의 Serration과 휘도를 향상하기 위해 도광판 밑면에 렌즈 형상의 바 구조를 도출해 적용한 결과 외관품질향상과 휘도향상을 얻었다.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.870-878
• /
• 2000

Background : We have studied the $^{67}Ga$ SPECT to determine the activity of pulmonary tuberculosis, especially in patients with minimal extent of the disease on chest radiographs. Because active minimal pulmonary tuberculosis is sometimes difficult to diagnose by means of initial chest X-ray, sputum examination and $^{67}Ga$ planar imaging, we compared $^{67}Ga$ planar imaging with SPECT to evaluate minimal pulmonary tuberculosis activity. Methods : $^{67}Ga$ planar imagings and SPECTs of 69 patients suspected of minimal pulmonary tuberculosis by the initial chest X-ray were performed and compared to each other. Active pulmonary tuberculosis was defined by a positive AFB smear and/or culture in the sputum and changes shown on the serial chest X-ray findings. Results : 1) $^{67}Ga$ planar imaging imagings showed positive uptakes in 24 patients and no uptakes in 13 patients, patients, which confirms active pulmonary tuberculosis. But SPECT imagings showed positive uptakes in 25 patients and no uptakes in 12 patients. 2) Patients confirmed with inactive pulmonary tuberculosis showed no uptake on $^{67}Ga$ planar imaging. Only one of the 32 patients confirmed as having inactive pulmonary tuberculosis showed positive uptake on $^{67}Ga$ SPECT imaging. Conclusions : According to the results of our study, $^{67}Ga$ planar imaging and SPECT are both sensitive in detecting the activity of minimal pulmonary tuberculosis. The difference between the two methods is not statistically significant, and the negative predictive value of the $^{67}Ga$ SPECT is not higher than that of $^{67}Ga$ planar imaging.