• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.386-391
• /
• 2006

Though a variety of demands for an green dwelling, it is hard to diffuse a wooden house due to high construction cost. So this study aims to diffuse to propose a space modular for production and supply. Therefore the result of investigation to the space modular of each room through the survey of width and depth in the type of dwelling in korea is as follows. 1) Investigated the mixture of magnitude on the total width and depth, the survey is showed commonly 3.6m and 4.2m. 2) Once the depth is 3.6m, a living room and inner room, room's width is 3.9m, 4.5m. Once the depth is 4.2m, those width is 4.8m. 3) By use of a survey, the post distances consisted of all rooms are 3.6m, 3.9m, 4.2m, 4.5m, 4.8m. The result of investigation to possibility for mixture applied to six level types invested post modules to the wooden house of post & Beam method is as follows. 1) With the regularity of depth and simplicity of width, It is potential to compound floor plan in korea. 2) It is possible to plan an informal shape of kitchen+dining room which is a spare space available for the merit changeable space after arranged main rooms. 3) It is possible to plan a space through a variety of mixture method at bathroom. Thus, it is possible for a variety of floor formations to build a low-cost wooden house through five types of post distance.

• 한국정보교육학회:학술대회논문집
• /
• 2007.08a
• /
• pp.267-272
• /
• 2007

학교 교육에서 문해력과 수리력에 비해 그 중요성이 간과되고 있는 공간 지각 능력과 도해력을 학습하기 위해서 학습자 중심의 지도 그리기 교육이 실제화 되어야 한다. 따라서 이 글에서는 보다 더 실제적 이고 효과적인 지도교육을 위한 지도그리기모듈을 구현하고자 한다. 특히 사회과의 경우 사고의 방법과 과정을 중요시 하는 교육목표를 가지고 있기 때문에, 현재의 저학년 초등교과교육 중 지도 그리기 학습의 문제점을 살펴보고 구체적 조작기의 아동을 위한 공간 능력의 향상과 구체물의 평면화 등 지도 그리기 교육의 목표를 수월하게 도달하기 위한 모듈을 구현하여 초등 지리 교육의 수월성과 함께 학습자의 수준에 맞는 흥미로운 학습을 도모하고자 한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.124-131
• /
• 2007

Aspheric glass lenses was fabricated by glass molding press(GMP), which is a plano-aspheric convox shape and intended for use as an optical design of 3 megapixel and 2.5 magnifications zoom in a camera phone module. Transcription ratio of form accuracy (PV) as well as resolution properties was measured for evaluation the molded lens. Form accuracy (PV) of the mold surface was $0.127\;{\mu}m$ in an aspheric and $0.168\;{\mu}m$ in a plano, in case of the molded lens it shows $0.205\;{\mu}m$ and $0.223\;{\mu}m$, respectively. Resolution of the molded lens was measured as a MTF[Contrast]. The molded lens shows contrast of 32.9% at 80 1p/mm and the value is similar with contrast of 33% obtained simulation.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.233-241
• /
• 2011

Currently, solar module is using the two methods such as a glass-filled method or a super-straight method. The common point of these methods is to use glass structure on the front of solar module. However, the reflectance of the solar module is high depending on the height of the incident sunlight due to the flat surface of the module front glass. Purposed to solve these problems, AG (anti-glare) structures were formed on the glass surface. Next is fabrication methods of AG structure. First, uneven structure made by micro blaster equipment was dipped in Hydro-fluidic acid (HF) acid. HF acid process was carried out to remove particles and to make high transmittance. The reflectance and transmittance of the anti-glare glass was compared to those of the bare glass. The reflectance of anti-glare glass decreased approximately 1% compared with bare glass. The transmittance of anti-glare glass was similar to bare glass. According to the sample angle, the difference of the reflectance between bare glass and the anti-glare glass was about 19%. Isc and efficiency value of anti-glare glass on bare solar cell appeared about 3.01 mA and 0.228% difference compared with bare glass. Anti-glare glass on textured solar cell appeared about 9.46 mA and 0.741% difference compared with bare glass. As a result, the role of anti-glare in the substrate is to reduces the loss of sunlight reflected from the surface. In this study, therefore, AG structure on the solar cell was used to improve the efficiency of solar cell.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2783-2786
• /
• 2005

본 논문은 레이저 비젼 센서를 이용하여 측정 대상의 3차인 위치 정보를 측정하기 위한 방법을 제안하였으며, 이를 이용한 측정 시스템을 개발하였다. 레이저센서는 물체의 평면방정식을 찾기 위해 사용되었으며, 측정된 물체의 평면의 방정식과 Camera를 이용한 물체 위치 정보와 함께 측정 대상의 3차원 정보를 얻는다. 이러한 고정밀 고속 계측을 위한 레이저 모듈 및 소프트웨어를 개발하고 전용 JIG장치에 의하여 측정하던 방식을 Robot과 Laser Vision Sensor를 이용하여 자동으로 측정하는 시스템을 구현하였다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

In order to acquire an image in a positron emission tomography, it is necessary to draw the position coordinates of the scintillation pixels of the detector module measured at the same time. To this end, in a detector module using a plurality of scintillation pixels and a small number of photosensors, it is necessary to obtain a flood image and divide a region of each scintillation pixel to obtain a position of a scintillation pixel interacting with a gamma ray. Alternatively, when the number of scintillation pixels and the number of photosensors to be used are the same, the position coordinates for the position of the scintillation pixels can be directly acquired as digital signal coordinates. A method of using a plurality of scintillation pixels and a small number of photosensors requires a process of obtaining digital signal coordinates requires a plurality of photosensors and a signal processing system. This complicates the signal processing process and raises the cost. To solve this problem, in this study, we developed a method of obtaining digital signal coordinates without performing the process of separating the planar image and region using a plurality of flash pixels and a small number of optical sensors. This is a method of obtaining the position coordinate values of the flash pixels interacting with the gamma ray as a digital signal through a look-up table created through the signals acquired from each flash pixel using the maximum likelihood function. Simulation was performed using DETECT2000, and verification was performed on the proposed method. As a result, accurate digital signal coordinates could be obtained from all the flash pixels, and if this is applied to the existing system, it is considered that faster image acquisition is possible by simplifying the signal processing process.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.329-332
• /
• 2007

현재 2D기반 내비게이션에서는 다양한 형태로 차량에 부착한 단말기나 핸드폰을 통하여 차량 주행 안내서비스를 제공하고 있으나, 이러한 주행 안내 서비스는 대부분 2차원 평면상에서 정보만을 지원해 줄 뿐 사람의 인식과 일치하는 실감형 정보를 제공하지 못하는 한계가 있다. 또한 차량이 도로를 주행하는 과정에서 다양한 돌발 상황이 발생할 수 있는데 이에 대한 정보의 제공이나, 또는 주행안내에 필수적인 직진, 회전 등 방향 정보와 차선 변경, 교통 표지판 정보 등 필요정보를 운전자에게 가장 효율적으로 제공할 수 있는 실감형 정보 제공의 필요성이 커지고 있는 실정이다. 본 논문에서는 안내 서브시스템, 차선 인식 서브시스템, 신호등/표지판 인식 서브시스템으로부터 정보를 취득하여, 취득된 정보를 표현 서브시스템이 안내 정보를 표현할 수 있도록 정보를 제공하는 주행상태 판단 모듈의 기능을 구현 한다.

• KIEAE Journal
• /
• v.17 no.4
• /
• pp.95-100
• /
• 2017

Purpose: Now a day, Most of the residential house in Korea consists of apartment buildings. However, in the case of old apartment buildings, dwelling environment condition depends on management effort by residents. But we can't rebuild or restructure only old single dwelling unit in apartment buildings. And we can't move every single dwelling unit in the apartment building. Therefore, this study suggests a prototype of combinable container dwelling module apartment. Method: The method of research is exploring the case of previously constructed containers. Based on the case, This study suggests prototypes to create a variable apartment design with dwelling container units. Based on the prototype, various combinations are proposed to produce various types of dwelling space. Finally, this study makes an example plan for the apartment by using the container unit modules. Results: This study suggests combinable container apartment building prototypes. And it may be a fundamental study of changing the apartment building concept.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.291-294
• /
• 2005

Precast Concrete apartments were main stream of domestic industrialized housing around 90's , and Steel Houses applying Steel Stud technique with light weighted steel have been dominant portion since 1995. On the other hand, various building techniques including Steel Stud method and highly prefabricated and industrialized Unit method are prevailing in developed countries like Japan. Steel Stud and Unit Box have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the Open System basis. In this study, the design standard for Unit house will be established coping with the established preparing standard for design specifications defined by Architectural Law and Promotion Law of Housing Construction. That is for design standard of industrialized private housing on the Open System basis.

• 건축구조
• /
• v.12 no.4
• /
• pp.52-53
• /
• 2005

a. 구조체가 받는 힘 중 횡력을 모두 메가컬럼이 부담하고, 내부외 보와 기둥은 중력방향의 하중만을 부담한다. b. 메가컬럼 안으로 코어 기능을 모두 넣어 자유로운 평면구성이 가능하다는 것이 최대의 장점이다. c. 모듈의 반복적인 조합을 통해 나온 유닛의 재조합으로 메가컬럼을 형성하고, 거대한 이 기둥을 외부로 노출시켜 구조미를 추구한다. d. 2009년 9호선 연장을 앞두고 서울의 최고 중심지가 될 강남역을 사이트로 정해 초고층 건물을 건축하여 도시경관을 더 돋보이게 한다.