• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.55-67
• /
• 2012

Real-time image georeferencing is required to generate spatial information rapidly from the image sequences acquired by multi-sensor systems. To complement the performance of position/attitude sensors and process in real-time, we should employ on-line aerial triangulation based on a sequential estimation algorithm. In this study, we thus attempt to derive an efficient on-line aerial triangulation algorithm for real-time georeferencing of image sequences. We implemented on-line aerial triangulation using the existing Given transformation update algorithm, and a new inverse normal matrix update algorithm based on observation classification, respectively. To compare the performance of two algorithms in terms of the accuracy and processing time, we applied these algorithms to simulated airborne multi-sensory data. The experimental results indicate that the inverse normal matrix update algorithm shows 40 % higher accuracy in the estimated ground point coordinates and eight times faster processing speed comparing to the Given transformation update algorithm. Therefore, the inverse normal matrix update algorithm is more appropriate for the real-time image georeferencing.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.105-120
• /
• 2001

The purpose of this study is to identify the relationship of self-efficacy, which is a kind of the self concept about one's own ability, to the decision-making process, which is the key part of consumer behavior. The subjects in this study were 985 male and female undergraduates of a university located in the city of Kyongsan, the north Kyongsang province. The collected data were statistically processed by MANOVA and ANOVA. For post test, Scaffle and $\chi$$^2$-test were employed. The followings are findings of this study : 1. Concerning incentive to buying, the group having the weaker general self-efficacy is stimulated more highly by the incentives of self-display, fashion pursuit and economic utility than the group having the stronger general self-efficacy does. 2. Regarding information sources. the factor of observation is frequently used by the group having the weaker general and social self-efficacies more than the group having the stronger general and social self-efficacies. 3. As to the evaluative criteria of clothes, the group having the stronger general and social self-efficacies put a higher value on functional and economical points than the group having the weaker general and social self-efficacies does. 4. As for the evaluative criteria of store the group having the stronger general self-efficacy lays stress on store atmosphere, store attributes and convenient shopping condition, while the group having the weaker general self-efficacy puts emphasis on brand and fashion. 5. In buying apparels, the group having the stronger general and social self-efficacies makes more planned purchase.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.28-33
• /
• 2017

Recently, the operation of precision pocket machining has been studied for the high speed and accuracy in industry to increase production and quality. Moreover, the demand for products with complex 3D free-curved surface shapes has increasing rapidly in the development of computer systems, CNC machining, and CAM software in various manufacturing fields, especially in automotive engineering. The type of aluminum (Al6061) that is widely used in aerospace fields was used in this study, and end-mill down cutting was conducted in fillet cutting at a corner with end-mill tools for various process conditions. The experimental results may demonstrate that the end mill cutter with four blades is more advantageous than that of the two blades on shape forming in the same condition precise machining conditions. It was also found that cutting forces and tool deformation increased as the cutting speed increased. When the tool was located at $45^{\circ}$ (four locations), the corner was found to conduct the maximum cutting force rather than the start point of the workpiece. The experimental research is expected to increase efficiency when the economical precision machining methods are required for various cutting conditions in industry.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1327-1334
• /
• 2012

This study shows the conformance-based design results of a fourth-order dynamic actuator showing a performance variation caused by variation in the components as well as aero-induced disturbances. The actuator comprises a BLDC motor, spur gear and worm gear assembly, and canard. The actuator performance was evaluated by using time-variant angle information of the canard. Based on the response surface models, critical system variables were screened using F-tests, and then, the performance was approximated as a function of the variables because it is difficult to determine the performance of a high-order dynamic system as a function of system variables through analytical approaches. In this study, the conformance of uncertain performance to the specification was defined as a probability measure. The design variables obtained by optimizing the measure can provide actuator performance conforming to the specifications considered, even though there is a variation in both the components and the aero-induced disturbances.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.487-495
• /
• 2013

As the first step to suggest effective ways of using direct analysis method considering current situations of construction fields in Korea, analytical approach is used to verify direct analysis method which adapts initial imperfection limitation of Korean specification of building construction. The main analytical variables are size of frames, axial load ratio, axial load distribution, value of notional loads, location of notional loads, and applied method of notional loads. The results show that the use of initial imperfection limitation of Korean specification, L/700 is suitable, and the recommendable method to use direct analysis method is applied notional loads based on L/700 as minimum lateral load at each story, even if B2 is less than 1.5 and lateral loads exist.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.6
• /
• pp.587-599
• /
• 2013

A simple but accurate analytical method to evaluate the fire resistance of unprotected concrete filled tubular (CFT) columns under standard fire condition is proposed based on the fire design framework of EC4. To this end, the accuracy of the current tabulation method for the temperature prediction proposed by Lawson et al. was first critically evaluated, and a new prediction equation for the temperature gradient across the CFT section was then proposed based on available test and finite element analysis results. Overall, the axial strength predicted by using the proposed equation under the general fire design framework of EC4 was more accurate than that based on existing methods and appeared reasonable for design purposes. The results of this study are directly usable for the more rational fire analysis and design of unprotected CFT columns.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.16-21
• /
• 2006

Uneven ink transfer of a print can be traced to several causes such as an incomplete contact between the paper surface and ink film, a coarse pattern of a continuous ink film after transfer, uneven absorption, etc. Uneven ink transfer was studied in this points by the Tollenaar. Uneven distributions of printed density are reflected in low ${\ulcorner}m{\lrcorner}$ values of the print. Tollenaar's smoothness coefficient ${\ulcorner}m{\lrcorner}$ value was important factor that deciding printed quality which was easily obtain by densitometry. Limiting print density $D_{\infty}$ that obtained Tollenaar's formulation working as a influence factor at the printed quality. In this study, we obtained limiting print density $D_{\infty}$ and smoothness coefficient ${\ulcorner}m{\lrcorner}$ value of domestic newspapers and foreign newspapers. And we analyzed about properties of the newspaper. The result of this study, smoothness coefficient ${\ulcorner}m{\lrcorner}$ value and limiting print density $D_{\infty}$ showed the good results in the low porosity and low roughness newspaper. Datum which obtained by this study was used as printability factor for the quality control and improvement of domestic newspaper and wished to apply as a basic data for the domestic newspaper quality.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.112-112
• /
• 2012

스포츠웨어 중 바람막이제품의 용도에 사용되는 소재는 폴리에스터와 폴리아미드 소재가 주류이며, 그 중에서 고품격의 바람막이 제품에 대해서는 주로 나일론6 소재를 사용하고 있다. 최근 소비자들은 삶의 질 향상과 야외활동의 증가로 인해 제품의 경량화, 안락한 착용감, 고기능성 등을 동시에 겸비한 제품을 요구하고 있다. 이러한 수요에 발맞추어 국내에서 많이 생산되고 있는 나일론6 소재를 이용하여 제품화 간계에서 경량감과 신축성이 발현될 수 있는 나일론6 소재의 경량 신축직물에 대한 연구개발이 요구되고 있다. 본 연구에서는 직물 단계에서의 경량감과 신축성이 발현될 수 있는 나일론6 소재 신축직물을 개발하기 위해 공중합 나일론6 폴리머와 일반 나일론6 폴리머를 복합방사 설비를 이용하여 side by side POY 26d/6f의 원사를 제조한 후 가연공정을 거쳐 개발된 DTY 20/6f 가연사를 직물 설계 시 위사방향으로 적용하여 제직을 실시하였다. 직물 설계 조건은 기존 T사에서 생산중인 나일론 DTY 20d/7f을 경사로, 개발 소재인 DTY 20/6f을 위사에 적용하였으며, 제직 시 경사밀도 2가지, 위사밀도 2가지로 설계하였으며, 조직의 변화에 따른 신축특성의 변화를 확인하기 위해 평직, Rib. 도비직으로 제직하였고, 이렇게 제조된 직물에 대해 전처리, 염색, 후가공, 코팅가공 공정 조건별로 테스트를 진행한 후, 신축성발현을 위한 최적 공정조건 확보를 위한 공정별 직물의 신축성 변화분석과 최적 공정을 통해 개발한 최종 직물에 대한 신축성 평가를 실시하였다. 테스트 결과, 제직 조건별로는 경사밀도와 위사밀도가 낮은 경우가 원단 내 수축이 더욱 많이 발생함으로써, 신축성이 향상됨을 알 수 있었으며, 조직별로는 평직, Rib. 도비직 순서로 신축성이 우수함을 알 수 있었다. 또한 공정별 신축성 변화분석 결과, 염색 시 가장 신축성 발현이 두드러지게 높은 것으로 나타났으며, 전처리는 일반 연속식 전처리 보다 CPB 전처리 공정이 이후 염색가공 및 코팅을 통해 제조된 직물의 신축성 향상 및 표면 평활성에 높은 기여를 하는 것을 알 수 있었다. 상기 조건에 서 얻어진 최적 공정 조건으로 제조된 최종 코팅직물의 경우에 22% 정도의 신축성이 나타나 개발 소재의 신축특성이 우수함을 확인하였다.

• Archives of design research
• /
• v.14 no.4
• /
• pp.209-216
• /
• 2001

The purpose of this study was to find out the characteristics of the floor plans of luxurious row-houses. The examined objects were 135 floor plans with the individual exclusive space of 50 pyung or more which collected from the solicitations for sale or the magazines of architecture, housing, or interiors. The major findings were summarized as follows: First, it is revealed that as the floor size become bigger, the appropriate additional spaces such as second family room, lounge hobbyroom and Atelier are formed instead of increasing room size. Second, it is revealed that the L- DK type was the most common in LDK system. Third, it is revealed that the master's zone composed generalized layout of 4 sections such as bedroom, sittingroom, bathroom, dressingroom. Fourth, it is revealed that the multifunctional room exist as a individual space located next to the kitchen. It used to be a post of rear balcony.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.196-196
• /
• 2011

산림연료 특성별 산불피해도 분석을 위하여 산불피해의 조사지역은 2009년, 2010년 산불이 발생했던 강원도 고성지역과 양양지역, 강릉지역과 삼척지역을 조사 대상지역으로 선정하였으며, 고성군의 경우 숲구조가 유령림인 활엽수림이 2개소, 칩엽수림 1개소, 장령림인 활엽수림 2개소로 총 5개소, 양양군은 숲구조가 유령림인 침엽수림이 1개소, 장령림 침엽수림 2개소 총 3개소, 삼척시의 경우는 숲구조가 유령림인 침엽수림이 1개소 외 대조구 장령림 침엽수림 1개소, 강릉시의 경우 숲구조가 장령림인 침엽수림이 3개소 총 13개소를 각각 대상지로 선정하였다. 산림연료 특성별 산불피해도를 조사하기 위한 조사지 규모는 $10m{\times}10m$로 하였으며, 현장 조사 항목은 조사지내의 산불피해 상태, 조사지 지형특성으로 나누어 조사를 실시하였다. 산불피해 상태는 산불진행방향, DBH, 총수고, 지하고, 고사여부, 편면연소, 밀도, 수간피해율, 수관피해율 등을 조사하였고, 조사지의 지형특성을 알아보기 위해 조사지의 위치(GPS), 해발고도, 사면방위, 산지경사, 지형을 조사하였다. 현장조사를 위한 조사장비로는 조사지의 지형도, 야장, 디지털 카메라, GPS, 수고측정기, 직경테이프, 캘리퍼, 50m 줄자 2개, 2m 폴대, 클리노메타, 바인더끈 등을 사용하였다. 산불사례 현장조사를 통해 임목고사여부, 편면연소, 수간피해율, 수관피해율 등의 산불피해 특성을 분석한 결과 연료의 특성별 유령림과 장령림의 편면연소율은 유령림은 97.3%, 장령림은 16.5%로 유령림의 편면연소율이 장령림보다 80.8% 더 피해를 받는 것으로 나타났으며, 수관피해율은 유령림은 95.4%, 장령림은 19.9%로 유령림의 수관피해율이 장령림보다 75.5%더 피해를 입은 것으로 조사 되었다. 또한 임목고사율은 유령림은 73.8%, 장령림은 24.5%로 유령림의 임목고사율이 장령림보다 49.3% 더 피해를 받는 것으로 분석 되었다.