• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.241-250
• /
• 2014

The purpose of this study is to propose structural technologies on the light-weight composite floor systems in the unit modular and to evaluate structural performance of the composite floor through flexural experiments. The flexural experiments were carried out on total nine specimens(each three type in shape) using steel flat deck and truss deck. From the results of test, all specimens showed the same failure patterns which exhibited deflection at the center of the specimens due to flexural deformation before concrete crushing at the upper of specimens. Also, we know that the proposed floors satisfied in serviceability and would be safe sufficiently. The ratio of experimental yield load by theoretical nominal load was the distribution of 0.86 to 1.27 with an average 1.04. Coefficient of variation in distribution showed good agreement.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.22-26
• /
• 2001

Microstructures of AlN thin films on Si substrates grown by plasma assisted molecular beam epitaxy were analyzed with various growth temperatures and substrate orientations. Reflection high energy electron diffraction (RHEED) patterns were checked for the in-situ monitoring of the growth condition. X-ray diffraction(XRD), double crystal X-ray diffraction (DCXD), and transmission electron microscopy/diffraction (TEM/TED) techniques were employed to characterize the microstructure of the films after growth. On Si(100) sub-strates, AlN thin films were grown mostly along the hexagonal c-axis orientation at temperature higher than $850^{\circ}C$. On the other hand the AlN films on Si(111) were epitaxially grown with directional coherencies in AlN(0001)/Si(111), AlN(1100)/Si(110), and AlN(1120)/Si(112). The microstructure of AlN thin films on Si(111) substrates, with a full width at half maximum of almost 3000 arcsec at 2$\theta$=$36.2^{\circ}$, showed that the single crystal films were grown, even if they includ a lot of crystal defects such as dislocations and stacking faults.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.437-441
• /
• 2009

1990년대 이후 하천환경에 대한 관심은 치수적 과점에서 이수적 관점, 환경적 관점으로 확대되어 가고 있으며, 이에 부응하여 하천환경을 개선하기 위한 노력이 1990년대 말부터 자연형 하천개발이라는 이름으로 확산되어 우리나라의 하천환경을 크게 변모시켜 나가고 있다. 실제로 자연형 하천은 우리 주변의 하천경관 및 수질을 많이 개선하는 효과를 거두어 왔으나, 하천의 보전 및 복원에 대한 구체적인 기술개발이 없는 상태에서 경쟁적으로 시행되어 비효율성, 비생태성, 비안전성의 문제를 노출시키고 있다. 특히 하천의 다양한 물리적 인자와 복합되어 형성되는 하도서식처 환경들에 대한 이해의 부족은 하천에 서식하는 다양한 생태계의 순환과정 및 연계성을 단절시키고 근본적인 하천환경복원을 어렵게 한다. 최근에 하천환경 복원사업의 근본 목표는 그 하천 고유의 하천경관이나 생태계 등의 특성을 회복(Rehabilitation)시키거나 복원(Restoration)시키는 것으로, 평여울, 급여울, 폐쇄형 하도습지, 웅덩이 등과 같은 하도서식처로서의 물리적 자연환경을 인위적으로 조성하여 원활한 생태환경이 자생될 수 있도록 하기 위한 노력의 일환이다. 그러나 하천 생태계는 물리적 환경에 의해서만 지배되는 것은 아니며, 하천생태계가 원활하게 조성되기 위해서는 그에 따른 적정한 수질이 유지되는 것 또한 중요하다. 물론 자연생태계의 순환과정이 원활해진다면, 하천의 자정능력 향상을 가져오게 되고 그로 인하여 수질도 생태환경에 적합하게 유지되는 것은 자연스러운 이치이다. 결국 자연적으로 조성된 하천에서의 물리적 서식처 환경이 수질에 어떠한 영향을 미치는지 파악하는 것은 앞으로 하천환경 복원사업에 있어서 매우 중요한 요소 중의 하나이다. 따라서 본 연구에서는 물리적 환경인 하도서식처 환경을 조사하고 그에 따른 화학적 특성을 평가해 보았다. 본 연구의 결과는 앞으로 하천복원에 있어서 물리적 서식처 조성과 수질의 상호 연계성 및 복원기술의 타당성을 평가하는데 중요한 지표가 될 수 있을 것으로 판단된다.

• Membrane Journal
• /
• v.28 no.1
• /
• pp.62-66
• /
• 2018

In this study the cleaning spherical beads with same density as water were fabricated. Bead moving velocity was measured with respect to the aeration rate and bead concentration in water reservoir. The permeation experiments for FR (filtration and relaxation) and SFCO (sinusoidal filtration continuous operation) modes were simultaneously carried out under the condition of 1 to 3% cleaning spherical bead concentration, 20 LMH and 500 mL/min aeration rate in the MLSS 8,000 mg/L activated sludge solution. The used membrane was the $90cm^2$ effective area and $0.4{\mu}m$ nominal pore size flat membrane. The TMP (transmembrane pressure) decreased as the bead concentration increased, and was shown most effective in FR mode with 2% bead concentration.

• Korean Journal of Microbiology
• /
• v.24 no.2
• /
• pp.147-153
• /
• 1986

Viable potential of Mycobacterium smegmatis, a slow grower in vitro cultivation and of M. leprae, an obligate intracellular parasitic bacterium, which can not be cultured yet in vitro was assessed by fluorospectrophotometry. Bacterial cells in different numbers and under various physiological status were incubater with fluorescein diacetate(FDA). After an incubation of the bacterial preparations with FDA at specified conditions, amount of fluorescein inside bacteria was measured by a fluorospectrophotometer at 470nm and 510nm of excitation and emission wavelengths, respectively. Fluorounit given by such bacteria showed a correlation with assessment of viability of the same preparations made by other methods, such as optical density and colony forming units of M. smegmatis and intracellular ATP content of M. leprae. The possible use of fluorospectrophotometry in assessing viability or physiological potential of bacteria, particularly intracellular parasites and fastidious organisms to culture in vitro is discussed in relation to other methods.

• Journal of Energy Engineering
• /
• v.15 no.1 s.45
• /
• pp.74-81
• /
• 2006

In this study, on the basis of an analytic hierarchy process (AHP) method and through a questionnaire on subjective preference and importance, various power supply systems were comprehensively compared with multiple decision criteria such as environmental, social, healthy, and economic viewpoints and then overall priority was assessed. When a decision-making problem is modelled by a hierarchy structure, the AHP method is regarded as a useful tool for extracting subjective opinions via the aforementioned questionnaire. Here, the overall preferences were obtained by linearly aggregating weighting vector and preference matrix. The energy systems such as nuclear, coal, and LNG power plants were selected because they took share over 90% of domestic electricity supply in Korea. Furthermore, wind power and photovoltaic solar systems were included as representative renewable energy systems in Korea. According to the results of this demonstration study, the following comprehensive comparison indicators were yielded: 1) weighting factors for 4 types of main criteria as well as for 11 types of sub-criteria; 2) preference valuation for 7 types of energy systems under consideration; 3) overall score for each energy systems.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.71-80
• /
• 2011

The fish fauna and characteristics of population of Zacco platypus in the 9 microhabitat at the Tan Stream was investigated from August, 2009 to April, 2010. The collected species during the survey period were 17 species belong to 7 families. Korea endemic species were Hemiculter eigenmanni and Odontobutis interrupta, which showed a ration of 11.8% in collected species. Dominant species was Z. platypus and subdominant species was Carassius auratus. Dominated species of C. auratus was at the dam-type pool, Meander-type pool, run, and rock-type pool, Pseudogobio esocinus was side channel, Rhinogobius brunneus was riffle, and Z. platypus was channel connected pool, substrate-type pool and channel unconnected pool. Length-weight relationship in the population of Z. platypus was 3.29. PCA analysis was in to the 3 groups identified. Bary-curtis cluster analysis indicated that the substrate-type pool and channel unconnected pool 65.9% showed the most similar, riffle, and dam-type 30.4% were identified as the most contrast.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.28-39
• /
• 1985

The structural and useful characteristics of silk habutae treated with silicone resin by emulsion finishing method were studied. The results were obtained through crease recovery test, water repellency test, scanning micrograph observation, amino acid analysis, X-Ray diffraction analysis, and Fourier Transform Infrared Spectroscopy. The results are summarized as follows; 1) The improvement in crease recovery of silk habutae finished with silicone resin, was observed b soaping treatment and curing conditions. 2) The higher water repellency and stiffness in silk fabrics finished with silicone resin was found by the fabric inspection and the scanning electron microscopic observation. It is suggested that silicone resin impregnated into the void of silk fibroin. 3) The polar side chains of amino acid composition were decreased, when the silicone resin was treated on silk fibroin. 4) Through Amino acid analysis of silicone resin finished fibroin, the different amounts of amino acid composition was indicated due to silk fibroin silicone polymer reaction and the structural difference of its fibroin were also proved by X-ray diffractograms. 5) The functionality of the siloxane compound may be deduced from the silicone finished silk habutae by Fourier Transform Spectroscopy. It was concluded from the above results that the useful characteristics of silk fabric can be improved by silicone resin finishing.

• Spatial Information Research
• /
• v.18 no.3
• /
• pp.23-32
• /
• 2010

LIDAR data are useful for forest applications such as bare-earth DEM generation for forest areas, and estimation of tree height and forest biomass. As a core preprocessing procedure for most forest applications, this study attempts to develop an efficient method to detect forest areas from LIDAR data. First, we suggest three perceptual cues based on multiple return characteristics, height deviation and spatial distribution, being expected as reliable perceptual cues for forest area detection from LIDAR data. We then classify the potential forest areas based on the individual cue and refine them with a bi-morphological process to eliminate falsely detected areas and smoothing the boundaries. The final refined forest areas have been compared with the reference data manually generated with an aerial image. All the methods based on three types of cues show the accuracy of more than 90%. Particularly, the method based on multiple returns is slightly better than other two cues in terms of the simplicity and accuracy. Also, it is shown that the combination of the individual results from each cue can enhance the classification accuracy.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.271-277
• /
• 2002

Pyeonghae Series, Giseong Series. Wonnam Series, Pyeonghae Unite gneiss, Hada leuco-granite gneiss are the Precambrian gneisses distributed in the north-eastern part of the Yeongnam massif. Even though there are no difference in lithologies between Pyeonghae and Wonnam Serieses. they have been regarded as different Serieses because of the presence of Giseong Series which has been considered meta-volcanics. However, field investigations reveal that the Giseong Series represents ductile shear zone having meta-volcanics-like appearances in some outcrops. The fact that both Pyeonghae and Wonnam Serieses experienced high grade metamorphism reaching upper amphibolite facies implies that any volcanics between these two Serieses should also occur as high-grade metamorphic rocks at present. The absence of Giseong Series as a low-grade meta-volcanics indicates the absence of logical base to distinguish Pyeonghae and Wonnam Serieses. Therefore, these two Serieses should be regarded as identical Series.