• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.61-65
• /
• 2016

In this study, we considered the ignition possibility for the shredded thermoplastic elastomer at the fire ground loaded the waste TPE. The average moisture content of the TPE sample was almost 0.33 wt.% at $110^{\circ}C$ and the range of ignition point was $461.9{\sim}491.9^{\circ}C$ approximately. In addition, we analyzed the change of weight and calorie the TPE sample according to temperature variations using the TG-DTA analyzer. As a result, the weight loss occurred twice in $250{\sim}420^{\circ}C$ and $420{\sim}473^{\circ}C$, and we found the second weight loss temperature range was the ignition point of TPE. Also, we conducted the spontaneous ignition tests of TPE for the wet and dry samples and we confirmed that the possibility of spontaneous ignition of TPE was very low. The elapsed time and humidity had little influence on the spontaneous ignition of TPE in this experimental conditions. In conclusion, the spontaneous of the shredded waste TPE in this study.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.101-104
• /
• 2008

The sailfish is the fastest sea animal, reaching its maximum speed of 110km/h. On its skin, a number of V-shaped protrusions pointing downstream exist. Thus, in the present study, the possibility of reducing the skin friction using its shape is investigated in a turbulent boundary layer. We perform a parametric study by varying the height and width of the protrusion, the spanwise and streamwise spacings between adjacent ones, and their overall distribution pattern, respectively. Each protrusion induces a pair of streamwsie vortices, producing low and high shear stresses at its center and side locations, respectively. These vortices also interact with those induced from adjacent protrusions. As a result, the drag is either increased or unchanged for all the cases considered. In some cases, the skin friction itself is reduced but total drag including the form drag on the protrusions is larger than that of a smooth surface. Since the shape of present protrusions is similar to that used by Sirovich and Karlsson [Nature 388, 753 (1997)] where V-shaped protrusions pointing upstream were considered, we perform another set of experiments following their study. However, we do not obtain any drag reduction even with random distribution of those V-shaped protrusion.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.10-12
• /
• 2008

Hemodynamic features of blood flow in the abdominal aorta aneurysm (AAA) are very important, because they are closely related with the rupture of aneurysm to death. It has been considered that the wall shear stress of blood flows influences the formation, growth, and rupture of AAA. On this account, it is important to understand the flow structure of blood in the aneurysm. In this study, the whole velocity field information inside a typical AAA was measured using an in vitro AAA model under the pulsatile flow condition. The vessel geometry was reconstructed based on the computerized tomography (CT) data of a patient. The AAA model was made by using a rapid prototyping (RP) method, based on the reconstructed vessel geometry. Velocity fields in the AAA model were measured at different pulsatile phases using a PIV (particle image velocimetry) system. As experimental results, a large-scale vortex is formed inside the AAA model and the vortices located near the AAA wall are supposed to increase the local pressure and wall shear stress. In this study, the AAA wall stress found to be was one of the most important governing parameters giving rise to the ruptured aneurysm.

• Journal of the KSME
• /
• v.19 no.4
• /
• pp.273-278
• /
• 1979

화학적 가공이란 화학적 절식이라고 말할 수 있는 방법으로서 주조 또는 공작기계에 의한 절삭 가공대신에 약품에 의한 용해작용을 이용해서 성형품을 만드는 방법이라 할 수 있다. 이 방법은 금속자의 눈금의 조각이나 프라스틱 제품에 눈금을 넣는 금형등에 이용되고 있다. 이는 원래 항공기공업방면에서 중용되어 개발된 기계가공에 대응하는 방법이다. 크기나 정밀도에 있어서 주조(die casting)가 부적당한 경우 혹은 모양이나 능률에 있어서 기계절삭에 의하는 것이 부적 당한 경우에는 이 방법이 이용된다. 최근에 와서는 항공기기계제작 분야에 있어서의 알루미늄의 표면가공뿐만 아니라, 자동차, 건축부분의 구조부품의 성형분야에도 진출하는 경향이 있으며 가 공대상금속도 실용금속일반에 걸쳐 확대되어 감으로써 가장 용도가 넓은 철강류에 확대되어 감 으로써 가장 용도가 넓은 철강류에 까지도 응용되어 가는 실정이다. 이와 같이 종래의 기계적인 수단이 유일한 방법이라고 생각되었던 금속가공분야에 있어서 이러한 화학적 가공법이 도입되 었다는 것은 십분주목할만 한 가치가 있다. 이 화학적 가공법의 특징을 종래의 기계가공법과 비교하면 다음과 같다. (1) 피가공판의 크기는 이를 수용하는 가공조의 용량에 따라 제한될뿐이며 어떠한 대형 물이라도 가공 가능하다. (2) 가공모양은 자유롭게 설계할 수 있고 더욱이 1매 금속 판에서 1공정으로서 복잡한 모양으로 성형할 수 있다. (3) 따라서 이작업에서는 리벳팅, 용접등의 부대작업을 필요로 하지 않는다. (4) 그 가공면은 일반으로 평활하고 마루리 연마공정을 생략할 수 있다. (5) 가공조작이 간편하여 특별한 숙련을 요하지 않고 설비도 가공조의에는 별로 고가의 기기류가 필요치 않다. (6) 이상과 같은 이유에서 본법의 가공비는 기계가공에 비해서 일반적으로 저렴하다. Symposium보고및 전문서가 많이 있으나 여기에는 중요한 몇가지만 소개한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.8
• /
• pp.1112-1118
• /
• 2000

The objective of this study is to increase lift and decrease drag of an airfoil at high angles of attack by delaying flow separation with piezo-ceramic actuators. The airfoil used is NACA 0012 and its chord length is 0.3m. An experiment is performed at the freestream velocity of 15m/s at which the Reynolds number based on the chord length is $2{\times}10^5$. Seven rectangular actuators are attached to the airfoil surface and move up and down based on the electric signal. Drag and lift are measured using an in-house two-dimensional force-balance and the surface pressures are also measured. At the attack angle of $16^{\circ}$, the separation point is delayed downstream due to momentum addition induced by the movement of the actuators. Lift is increased by 10%, drag is reduced by 37%, and the efficiency is increased up to 170%. The flow fields with and without control are visualized using the smoke-wire and tuft techniques.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.3
• /
• pp.195-200
• /
• 1984

In-plane tension fatigue tests(R=0.1) were carried out to investigate the initiation and growth behaviors of very small surface fatigue cracks on smooth unnotched surfaces of type 304 stainless steel at room temperature. The present paper deals with the unification of two approaches to the analysis of fatigue: the one approach is based on fracture mechanics concept and the other on low-cycle fatigue concept. The results are;(1)Maximum crack length, 2 $a_{max}$, initiated at a very small surface scratch not exceeding 20 .mu.m which can exist on the surface after buffing. And the density of small surface crack is remarkably low compared to that of mild steel. (2) The growth rate, d(2a)/dN, of very small fatigue cracks can be represented by one straight line as a function of either stress intensity factor range, .DELTA. $K_{I}$ or cyclic total strain intensity factor range, .DELTA. $K_{\epsilon}$$_{I}$/, for various values of the nominal stress range.e.e.e.e.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.134-140
• /
• 2017

CFRP has many industrial applications due to its low weight and high strength properties. CFRP is a composite material composed of carbon fibers embedded in a polymer matrix; it provides excellent resistance to fatigue wear, corrosion, and breakage due to fatigue. It is increasingly demanded in aircraft, automotive, and medical industries due to its superior properties to aluminum alloys, which were once considered the most suitable for specific applications. The basic machining methods of CFRP are drilling and route milling. However, in the case of drilling, the delamination of each layer, uncut fiber, resin burning, spalling, and exit burrs are barriers to successful application. This paper investigates the occurrence of exit burrs when drilling holes with ultrasonic vibration. Depending on design parameters such as the point angle, the characteristics of hole drilling were identified and appropriate machining conditions were considered.

• The Journal of Korean Medicine
• /
• v.26 no.3 s.63
• /
• pp.215-227
• /
• 2005

Objectives : This study was carried out to investigate the effects of Pyungjintang on indomethacin-induced gastric mucosal lesions of mire. Methods : Experimental mice were classified into not-treated group (NOR group), gastro-inflammation elicitated group (CON group), misoprostol-administered group after gastro-inflammation elicitation (MA group), and Pyungjintang-administered group after gastro-inflammation elicitation (PA group). This study examined the morphological change, distribution of mast cells, mucus surface cells, neutral mucus secreting cells, acid mucus secreting cells, PNA reaction, angiogenesis (MIP-2), COX-1, Hsp70, NF-kB p50, COX-2IL-12B, ICAM-1, BrdU and apoptotic cells of gastric mucosa. Results : 1. The scars of diapedesis, dilatation of right gastric artery and the hemorrhagic erosions of gastric mucosa were reduced in the MA and PA groups. 2. Gastric perforation was observed in the gastro-inflammation elicitated group, but not in the MA and PA groups. 3. The COX-1 positive cellsl, cell proliferation of gastric mucosa, neutral mucus secreting ce31s, acid mucus secreting cells and PNA positive reaction of surface mucus cells were increased in the MA and PA groups. 4. The distribution of apoptotic cells, mast cells, MIP-2, Hsp70, NF-kB p50, COX-2, IL-l2B and ICAM-1 were decreased in the MA and PA groups. Conclusions : Pyungjintang had excellent effects on indomethacin-induced gastric mucosal lesions in mice.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.345-353
• /
• 2005

Government is supporting development of home networking. But, this new system is much expensive to introduce in the home. And limit for establishment is so many in the home. Therefore, in this paper, We escape from monotonic control of Home Automation and draw a plan Intelligent Home Automation to be developed. We reflect Home Network to the foundation and propose Home Automation on Ubiquitous Sensor Network, We Design of Ubiquitous Home Automation System for 35-Pyung Apartment Based on USN Environment. This becomes the Home Automatic Behavior System which is executed to the automatic to be improved.

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.275-281
• /
• 2006

The purpose of this study is to investigate hand and sensibility of PET treated by Ultra-Violet (UV). The 4-channel PET knit fabric was treated by a self-made UV instrument in 5cm distance with different time frames-0min, 30min, and 90min. For hand evaluation, mechanical properties were measured by the KES-FB system. The environmental condition was controlled at 29$^{\circ}C$, 75% (R.H.)-summer standard climate. Twenty female students evaluated 'roughness', 'smoothness', 'wetness', 'stiffness', 'coolness', 'touch', 'preference', and 'comfort'. The outcomes of the experiment are as follows: The surface roughness of mechanical properties showed significant differences and the value of PET irradiated by UV for 90min was highest. The order of primary hand value such as NUMERI and FUKURAMI was in a following order-Untreated > 30min treated > 90min treated. Total hand value showed that PET irradiated by UV for 90min was appropriate for using summer fabric. The results of subjective sensibility were that the untreated and 30min treated PET were recognized as similar and had a good evaluation on 'comfort', 'preference' and 'the sense of touch'. This consequence disagreed with total hand value, because it was considered that subjects' hand sensibility was dependent on the feel of smoothness.