• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.208-213
• /
• 2000

본 논문은 정지 화상에 대한 CBIR(Content-Based Image Retrieval)방법 중 칼라 특성을 이용해서 영상 내 공간 정보를 충분하게 표현할 수 있는 알고리즘을 제안한다. 일반적으로 칼라 특성을 이용한 CBIR은 영상 내 공간정보를 충분하게 표현하지 못하는 단점을 지니고 있다. 이에 기존 논문에서는 인위적으로 영상을 여러 개로 분할하는 방법 등으로 공간정보를 표현하고자 하였지만 특징벡터의 수가 급격히 늘어남에 따라 검색효율이 저하된다는 단점을 가지고있다. 본 논문에서는 기존의 방법을 칼라 오브젝트의 추출 방법에 따라 1차와 2차 관계에 의한 방법으로 분류하고, 이동, 회전 특히 크기 변화(축소, 확대)에 탁월한 성능을 보이는 칼라 오브젝트의 3차 관계를 이용한 방법을 소개한다. 주어진 영상으로부터 양자화된 24개의 버킷을 생성해서 각 버킷 내의 칼라에 대한 색의 표준 편차로 색의 분산 정도틀 나타내고, 히스토그램의 빈도수가 높은 세 개 버킷의 평균 칼라 위치를 계산해서 그들의 상호 각도를 추출하여 영상의 특징 벡터로 사용한을 제안하였다. 실험결과 기존 방법보다 특히 영상의 크기 변화에 대해 좋은 결과를 얻을 수 있었으며, 계산량도 적어 효율적임을 보여 주었다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.109-113
• /
• 2003

기존의 VOB(Virtual Output Buffer) 모델에서 신경회로망의 학습 패턴 처리를 위해 가상 셀 손실율이 도입되었다. VOB 모델은 신경망이 실제 셀 손실율 없이도 연결 수락 경계를 잘 찾을 수 있음을 보여주었다. 그러나 VOB 모델은 셀 손실율을 과다 평가하는 경향이 있어 결과적으로 망 자원의 이용률이 낮은 단점이 있다. 된 논문에서는 이러한 단점을 보완하는 방법으로 연결 수락 경계에서 셀 손실율의 평균에 대한 정보를 충분히 포함하는 셀 손실율 참조 곡선의 개념을 제안하였다 그리고 제안된 셀 손실을 참조 곡선을 이용하여 가상 셀 손실율을 처리하는 방법을 제안하였다. 제안된 학습 패턴 처리 방법은 ATM 트래픽 중에 가장 대표적인 두 가지 호원에 대하여 실험하였다. 실험에 사용된 호원은 LAN 데이터의 트래픽 특성을 가지는 On-Off 트래픽과 비디오 화상 통신의 특성을 가지는 Auto-Regressive 트래픽이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1642-1652
• /
• 2012

Generally, a camera isn't located at the center of display in a tele-presence system and it causes an incorrect eye contact between speakers which reduce the realistic feeling during the conversation. To solve this incorrect eye contact problem, we newly propose an intermediate view reconstruction algorithm using both a color camera and a depth camera and applying for the depth image based rendering (DIBR) algorithm. In the proposed algorithm, an efficient hole filling method using the arithmetic mean value of neighbor pixels and an efficient boundary noise removal method by expanding the edge region of depth image are included. We show that the generated eye-contacted image has good quality through experiments.

• Spatial Information Research
• /
• v.2 no.2
• /
• pp.189-196
• /
• 1994

Adaptive smoothing filter is a filter that averages out the intensities around the pixels of similar intensities while conserving the discontinuties. When human eyes rec-ognize a map, the brain can easily assign one color for each element such as road or building while computer distinguishes all the minute color differences even for one ele¬ment. We can approach to the solution by using the adaptive smoothing filter so that the machine can assign one color for each element as much as we want, and it is found to be a very essential tool foor map segmentation of urban areas. The filter is applied to a scanned map, and it is used to extract roads and residential areas.

• Pediatric Infection and Vaccine
• /
• v.15 no.2
• /
• pp.146-151
• /
• 2008

Purpose : Multidrug-resistant Acinetobacter baumannii (A. baumannii) is recognized to be the most difficult pathogen to control and treat in pediatric burn centers. We analyzed the antibiotic susceptibility pattern of A. baumannii in our pediatric burn intensive care unit during the past 7 years. Methods : We retrospectively evaluated 56 patients (105 samples) under the age 15 years and who were infected with A. baumannii between January 1999 and December 2005. Results : Fot the 56 patients, the ratio of males to females was 1.15:1 and the median age was 48.3 months. The sites of 105 isolates were wounds (65%), sputum (20%), blood (6 %), cutdown tips (5%), endo-tip tubes (2%) and urine (2%). A. baumannii presented yearround. The annual antimicrobial resistance rate increased and the multidrug resistant rate for two or more antibiotics was 93.33%. For 3 patients in whom resistance emerged, the interval period between the susceptible and resistant strains after antibiotic use was a mean of 10 days. The A. baumannii isolated from blood were all multi-drug resistant pathogens. Conclusion : Multidrug resistance of A. baumannii is increasing. Strict infection control guidelines and active surveillance are needed for the prevention and treatment of A. baumannii in hospitals.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.84-97
• /
• 2016

This study was to investigate the user's thermal environments of the children's parks according to pavements and sunscreen types during periods of heat waves. The measurements were conducted at the sand pits, rubber chip pavement, shelters, and green shade ground of the two children's parks located in Jinju, Korea(Chilam: $N\;35^{\circ}11^{\prime}1.4{^{\prime}^{\prim}}$, $E\;128^{\circ}5^{\prime}31.7{^{\prime}^{\prime}}$, elevation 38m, Gaho: $N\;35^{\circ}09^{\prime}56.8{^{\prime}^{\prime}}$, $E\;128^{\circ}6^{\prime}41.1{^{\prime}^{\prime}}$, elevation 24m) over three days during 11-13, August, 2016. The highest ambient air temperatures at the Jinju Meteorological Office during the three measurement days were $35.9{\sim}36.8^{\circ}C$, which corresponded with the extremely hot weather. A series of experiments measured air temperature, relative humidity, wind velocity, black globe temperature, and long-wave and short-wave radiation of the six directions 0.6 m above ground level. The wet bulb globe temperature(WBGT) and the universal thermal climatic index(UTCI) were used to evaluate thermal stress. Surface temperature images of the play equipment were also taken using infrared thermography. Surface temperatures of the play equipment and grounds were used to evaluate burn risk through contact with playground materials. The results showed the following. The maximum air temperatures averaged over 1-hour period for three days were $36.6{\sim}39.4^{\circ}C$. The sun shades reduced those temperatures by up to $2.8^{\circ}C$(green shade) and $1.0^{\circ}C/2.3^{\circ}C$(shelters). The minimum relative humidity values averaged over 1-hour period for three days were 44~50%. The sun shades increased those humidity values by up to 6%(green shade) and 4%/6%(shelters). The risk of heat related illness at the measurement sites of the children's parks were extreme and high in the daytime hours. The maximum WBGT values averaged over a 30-minute period for three days were $31.2{\sim}33.6^{\circ}C$. The sun shades reduced those WBGT values by up to $2.4^{\circ}C$(green shade) and $0.5^{\circ}C/2.1^{\circ}C$(shelters) compared to sandpits, but would not block the risk of heat related illness in the daytime hours. The category of heat stress at the measurement sites of the children's parks were extreme and very strong in the daytime hours. The maximum UTCI values averaged over a 30-minute period for three days were $39.9{\sim}48.1^{\circ}C$. The sun shades reduced those UTCI values by up to $7.8^{\circ}C$(green shade) and $4.1^{\circ}C/8.2^{\circ}C$(shelters) compared to sandpits, but could not lower heat stress category from extreme and very strong to strong and moderate in the daytime hours. According to the burn threshold criteria when skin was in contact with playground materials, the maximum surface temperature of the stainless steels($70.8^{\circ}C$) surpassed three seconds $60^{\circ}C$ threshold for uncoated steel, that of the rubber chip($76.5^{\circ}C$) surpassed five seconds $74^{\circ}C$ threshold for the plastic, that of the plastic slide($68.5^{\circ}C$) and seats($71.0^{\circ}C$) surpassed the one min $60^{\circ}C$ threshold for plastic, respectively. The surface temperatures of shaded play equipment were lower approximately $20^{\circ}C$ than those of play equipment exposed to the sun. Therefore, sun shades can block the risk of burns in daytime hours. Because of the extreme and high risk of heat related illness and extreme and high heat stress at the children's parks during periods of heat waves, parents and administrators must protect children from the use of playgrounds. The risk of burn when contact with play equipments and grounds at the children's parks during periods of heat waves, was very high. The sun shades are essential to block the risk of burn from play equipments and grounds at the children's parks during heat waves.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.43-57
• /
• 2002

This paper introduces an analysis method to predicting the flow characteristic of flow field around otter board In order to develope a high performance model. In this experiment, it is used a numerical analysis of flow field through CFD(Computational Fluid Dynamic), PIV method in which quantitative, qualitative evaluation is possible. In this experiment, it is used PIV method with flow filed image around otter board in order to analysis of flow characteristic. The result compared flow pattern with analysis result through CFD and also measurement result of lift and drag force coefficient carried out in CWC(Circulating Water Channel). The numerical analysis result is matched well with experiment result of PIV in the research and it is able to verify In the physical aspect. The result is as follows ; (1) It was carried out visibility experiment using laser light sheet, and picture analysis through PIV method in order to analysis fluid field of otter-board. As a result, the tendency of qualitative fluid movement only through the fluid particle's flow could be known. (2) Since PIV analysis result is quantitative, this can be seen in velocity vector distributions, instantaneous streamline contour, and average vorticity distributions through various post processing method. As a result, the change of flow field could be confirmed. (3) At angle of attack 24$^{\circ}$ where It Is shown maximum spreading force coefficient, the analysis result of CFD and PIV had very similar flow pattern. In both case, at the otter-board post edge a little boundary layer separation was seen, but, generally they had a good flow (4) As the result of post processing with velocity vector distributions, instantaneous streamline contour and average vorticity distributions by PIV, boundary layer separation phenomenon started to happen from angle of attack 24$^{\circ}$, and from over angle of attack 28$^{\circ}$, it happen at leading edge side with the width enlarged.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.454-461
• /
• 2017

The purpose of this study is to investigate the types of domestic safety accidents involving children and to verify the difference of safety knowledge according to variables of parents. Subjects include 226 parents who have 3-5 year old infants enrolled in kindergartens and day care centers in I-city, Jeollabuk-do. The study tools are modified and complemented questionnaire for the study purpose referred to the preceding research data and the literature. For the processing of collected data, frequency analysis, descriptive statistics, one-way ANOVA, and the Duncan post-test were utilized using the SPSS program. The results of this study are as follows: First, safety accidents occurred at the majority of homes which have infant children. On average, the occurrence frequency was 1.78 times per six months. The accidents involving infants occurred in the order of drop or slip, crash or impact, stricture or jamming, fall, stab or cut, burn, swallow or inhalation. Second, both parents had an average level of safety knowledge. There was a distinction in the areas of 'fall' and 'first aid' according the mother's age. In addition, stay-at-home mothers had the higher level of safety knowledge compared with working mothers in the areas of 'general safety knowledge' and 'fire'. There was a distinction in the area of 'fire' according to the father's age. Given these findings, safety training programs for parents to improve safety knowledge needs to be developed.

• The Journal of the Korean bone and joint tumor society
• /
• v.8 no.3
• /
• pp.83-89
• /
• 2002

Purpose: To analyze the postoperative functional and radiographic follow-up results in patients who underwent percutaneous radiofrequency ablation therapy after the diagnosis of osteoid osteoma. Materials and Methods: Seven patients, who were clinically and radiographically diagnosed with osteoid osteoma from July 1999 to January 2001, and received percutaneous radiofrequency ablation therapy. The average follow-up period was 15.5 months(range, 8~25 months). For the diagnosis and accurate localization of the lesion, simple radiography, computed tomography and magnetic resonance imaging(MRI) were performed preoperatively. Simple radiographs and MRI were taken periodically for the follow-up studies. Results: In all 7 patients, symptoms completely disappeared within 3 days after the operation. The average period of hospitalization was 2.4 days, excluding 1 patient who needed an additional burn treatment. The average postoperative night and day pain scores were 1.8 and 1.3, respectively. The average vocational and recreational activity scores were 1 and 0.6, respectively. Conclusions: Satisfactory functional results were obtained with percutaneous radiofrequency ablation therapy for the elimination of osteoid osteoma. Compared to conventional treatment, the advantages of this therapy were short hospitalization period, no internal fixation and bone graft for preventing fracture, and no limitation of joint motion by long fixation period.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.999-1004
• /
• 2010

Recently, many technologies have been developed in order to satisfy stringent emission regulations. However, in the case of diesel engines, the stringent emission regulations with respect to NOx and PM have not yet been satisfied. A dramatic reduction in the NOx and PM emissions could be achieved by using after-treatment systems such as lean NOx trap (LNT) and urea-SCR systems. However, the high temperature in the exhaust pipe affects the spray behavior of the secondary injector, which is used for supplying the Urea-SCR. Because of this high temperature, it is difficult to achieve uniform distribution of the reducing agent in the manifold. In this paper, the characteristics of a urea-SCR injector used for injecting in the exhaust pipe are presented. The purpose of this study was to investigate the spray characteristics of the injector, such as the spray angle, injection quantity, and SMD. In addition, laser diagnostics and high-speed-camera images were used to analyze the injector spray characteristics and to present a distribution of reduction in the transparent manifold.