• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1001-1005
• /
• 2010

본 연구는 식생지름에 따른 식생된 복단면 하천에서 수리특성에 관한 것이다. 또한 국외에서 개발된 모형들의 차이점과 적용가능성을 조사하는 것이다. 연구결과로써 주수로의 유속은 식생밀도 증가에 따라 증가하는 동안 경계면마찰계수는 감소하다가 어느 식생밀도 지점부터 일정하였다. 하상경사가 0.5 ‰와 식생직경이 12 mm일 경우 경계면마찰계수에 대한 Pasche 모형은 10.9 %, Bertram 모형은 12.4 %, Mertens 모형은 16.8 % 평균오차를 발생시켰다. 그러나 식생밀도가 증가할수록 Nuding 모형의 오차가 증가함을 볼 수 있으며, 평균오차가 60.5 % 발생되었다. 주수로의 실측된 유속에 대한 Pasche 모형의 평균오차는 2.8 %, Mertens 모형의 평균오차는 8.3 %, Bertram 모형의 평균오차는 14.7 %, Nuding 모형의 평균오차는 11.8 %이다. 그러므로 Pasche 모형은 실제 복단면 하천에 적용하기 위해 더 유용하다. Strickler 계수를 사용한 Bertram 모형은 다른 모형보다 계산이 복잡하지 않고 측정된 마찰계수 및 유속값과 잘 일치한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.143-150
• /
• 1994

When the transverse bed slope ($S_t$) in channel bend is more than 0.1, it may produce undesirable results on the bed topography of the cross section. The linear relationship for $S_t$ results in zero or negative flow depths at the shallow $S_t$de of the cross section (i.e., inner bank). The exponential relationship for $S_t$ results in excessive flow depths at the deep side of the cross section (i.e., outer bank). This problem can be solved by combining the best features of both relationships described above. From the study, the linear relationship can be applied for the deep $S_t$de of the cross section. But the exponential relationship is suitable for the shallow side. Therefore, the new relationship of $S_t$ is clarified mathematically. A new mathematical model for bed topography is developed herein which takes accounts of the phase lag and the influence of the width to depth ratio. This model is used to analyze two sets of data: one from laboratory channel and the other from natural channel. A good agreement is found between the observed and the calculated bed topography based on the analysis of two sets of data.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.29-39
• /
• 2011

This study aims to investigate the relationship between the mean diameter of bed material and the tractive force due to flow in domestic natural rivers. To investigate the size of bed material, sampling in the field and estimation of mean diameter have been conducted. The relationship between the mean diameters and tractive force is figured out by calculating tractive force and frictional velocity. The field works have been carried out at 94 location of 18 rivers including 4 large watersheds. In order to determine the quantities of discharge used to calculate the tractive force, the various values of frequency have been estimated and tested. As a result, it is found that the 1.01 year frequency discharge is most appropriate for the bankfull discharge. From results, the relatioship between the mean diameter of bed material the tractive force is presented in this study.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.579-589
• /
• 2009

Hwang River in South Korea, has experienced channel adjustments due to dam construction. Hapcheon main dam and re-regulation dam. The reach below the re-regulation dam (45 km long) changed in flow regime, channel width, bed material distribution, vegetation expansion, and island formation after dam construction. The re-regulation dam dramatically reduced annual peak flow from 654.7 $m^3$/s to 126.3 $m^3$/s and trapped the annual 591 thousand $m^3$ of sediment load formerly delivered from the upper watershed since the completion of the dam in 1989. An analysis of a time series of aerial photographs taken in 1982, 1993, and 2004 showed that non-vegetated active channel width narrowed an average of 152 m (47% of 1982) and non-vegetated active channel area decreased an average of 6.6 km2 (44% of 1982) between 1982 and 2004, with most narrowing and decreasing occurring after dam construction. The effects of daily pulses of water from peak hydropower generation and sudden sluice gate operations are investigated downstream of Hapcheon Dam in South Korea. The study reach is 45 km long from the Hapcheon re-regulation Dam to the confluence with the Nakdong River. An analysis of a time series of aerial photographs taken in 1982, 1993, and 2004 showed that the non-vegetated active channel width narrowed an average of 152 m (47% reduction since 1982). The non-vegetated active channel area also decreased an average of 6.6 $km^2$ (44% reduction since 1982) between 1982 and 2004, with most changes occurring after dam construction. The average median bed material size increased from 1.07 mm in 1983 to 5.72 mm in 2003, and the bed slope of the reach decreased from 0.000943 in 1983 to 0.000847 in 2003. The riverbed vertical degradation is approximately 2.6 m for a distance of 20 km below the re-regulation dam. It is expected from the result of the unsteady sediment transport numerical model (GSTAR-1D) steady simulations that the thalweg elevation will reach a stable condition around 2020. The model also confirms the theoretical prediction that sediment transport rates from daily pulses and flood peaks are 21 % and 15 % higher than their respective averages.

• Journal of Korea Water Resources Association
• /
• v.42 no.8
• /
• pp.619-629
• /
• 2009

The objective of this study is to estimate bed-resistance in gravel-bed rivers using the equivalent roughness height($k_s$). We calculated the friction factor(f) with the measured data from 8 domestic gravel-bed rivers and investigated the size distributions of the bed materials. The averaged $k_s$ in each cross-section, which is determined under the hypothesis that the vertical velocity distribution follows the logarithmic law, is compared with the reach $k_s$ which is calculated with the cumulative grain diameter distribution curve of bed materials. Moreover, the applicability of existing formulae, such as Strickler type equations, is examined by comparing with Manning's n value converted from the $k_s$. According to the results, the reach $k_s$ proves to be a good indicator of representative characteristic of bed materials in a reach, and the Manning's n based on the reach $k_s$ is appropriate for practical estimation of the bed-resistance, for RMS errors between calculated and measured Manning's n is less than 0.003. The correlation between the $k_s$ and specified bed-material size($D_i$) is very low, so it is difficult to select a proper one among the existing empirical equations.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.7
• /
• pp.536-543
• /
• 2011

In order to find the best design of artificial stream for the riverbed filtration in multi-purpose filtration pond, a mathematical model was developed employing the energy line and the Manning's formula and was analyzed by the Euler's technique. Various design factors were investigated through scenario analyses of the artificial stream using the model. Results showed that the appropriate slope of the stream bottom was 2/10,000 and the appropriate infiltration rate at the streambed was $2.5m^3/m^2-day$ for the pond with the area of 100 ha, and that the Manning's roughness coefficient in this case was expected to be about 0.026 and the maximum water-depth was less than 1m. It was also shown that the longer the artificial stream the more advantageous it became for the riverbed filtration. Furthermore, results showed that it was not an efficient way to prevent clogging of the streambed by increasing the flow velocity of the stream and that the performance was higher near a weir with a large head drop.

• Journal of Korea Water Resources Association
• /
• v.49 no.2
• /
• pp.83-94
• /
• 2016

Geomorphological, bed material and hydraulic characteristics are basis informations for the planning, design and management of the river in the aspect of flood control and environmental conservation, and it is very important to use these informations for the design of stable channel. In this study, dominant discharge was selected, geomorphological and hydraulic characteristics were analyzed using that discharge and also the characteristics of bed materials distribution were analyzed and bed materials-flow resistance relationship was evaluated, for the upstream section of Namgang dam. The dominant discharge was estimated a return period of approximately 1.5 year and stream type were classified Segment 1 and Segment 2 in this stream. Also, the frequency of riffle-pool showed 4.4 because this study area has the characteristics of natural channel that have not channel-crossing structures. In dominant discharge, according to the results that analyzed relationship between $h/d_{50}$ and $V/u_*$ to calculate flow resistance by bed materials, Julian's formula showed to appropriate in channel where is relatively close to natural river and is predominantly consisted of gravel, cobble, boulder and rock in mountain, and it was confirmed that the image processing methodology will be easily applied to the analysis of bed materials distribution in future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.643-651
• /
• 2008

In the present paper, turbulent open-channel flows over longitudinal bedforms are numerically simulated. The Reynolds- averaged Navier-Stokes equations in curvilinear coordinates are solved with the non-linear $k-{\varepsilon}$ model by Speziale( 1987). First, the developed model is applied to rectangular open channel flows for purposes of model validation and parameter sensitivity studies. It is found that the parameters $C_D$ and $C_E$ are important to the intensity of secondary currents and the level of turbulent anisotropy, respectively. It is found that the non-linear $k-{\varepsilon}$ model can hardly reproduce the turbulence anisotropy near the free surface. However, the overall pattern of the secondary currents by the present model is seen to coincide with measured data. Then, numerical simulations of turbulent flows over longitudinal bedforms are performed, and the simulated results are compared with the experimental data in the literature. The simulated secondary currents clearly show upflows and downflows over the ridges and troughs, respectively. The numerical results of secondary currents, streamwise mean velocity, and turbulence structures compare favorably with the measured data. However, it is observed that the secondary currents towards the troughs were significantly weak compared with the measured data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.282-282
• /
• 2017

모래, 실트 및 자갈과 같은 비점착성 유사는 하천에서의 이동 형태에 따라 소류사와 부유사로 구분된다. 부유사는 난류로 인해 흐름 내에서 부유 상태로 이동하는 유사로, 대부분의 자연 하천에서 유사는 부유사 형태로 이송된다. 유수동역학적 조건 하에서 이동하는 부유사의 입도 분포는 유사 입자의 부유와 퇴적에 따라 불규칙적으로 변화하기 때문에 여러 연구에서 주요한 문제로 다뤄지고 있다. 부유사의 입도 분포는 흐름 유속, 부유사의 부유 높이, 하상 재료의 특성 등에 따라 변화하며, 로그 정규분포를 따르는 것으로 알려져 있다. 이에 본 연구에서는 여러 다양한 하천 흐름 조건에서 부유사의 입도 분포를 모의할 수 있는 입도 분포 모형에 관한 개념적 틀(Framework)을 제안한다. 유사 입자의 입도 분포 모의는 추계학적 방법의 적용을 통해 얻어진다. 본래 점착성 유사의 입도 분포를 모의하기 위한 추계학적 입도 분포 모형으로부터 제안된 개념적 틀로, 다양한 흐름 조건 하에서 특정 확률 분포형을 띠는 입도 분포를 모의할 수 있다. 점착성 유사의 이동 모형에서는 점착성을 띠는 유사 입자들의 응집 현상에 따른 크기 변화를 모의하기 위한 응집 모형이 필수적이다. 시간에 따른 크기 변화를 모의하는 응집 모형에서, 흐름 내 여러 특성들에 의해 결정되는 응집 인자와 달리 파괴 인자의 경우 불규칙적 난류 운동으로 인해 무작위한 특성을 띤다. 모형에서 요구되는 파괴 인자를 특정 확률 분포형을 띠는 난수로 고려함으로써 점착성 유사의 입도 분포 모형이 개발되었다. 이 때, 점착성 유사는 프랙탈 구조를 가지는 것으로 가정하기 때문에 크기에 따라 밀도와 침강 속도가 변화한다. 반면 비점착성 유사는 크기에 따른 밀도 변화가 일어나지 않으므로, 고정된 밀도와 프랙탈 차원을 적용하여 점착성 유사의 입도 분포모형으로부터 비점착성 유사의 입도 분포 모의가 가능할 것으로 판단된다. 이러한 추계학적 방법의 적용을 통해, 하나의 경계 조건으로 대변되는 하상 특성에 따른 단점 또한 보완될 것으로 예측된다. 예를 들어 로그 정규 분포를 띤다고 가정할 때 보정을 통해 결정해야하는 변수는 평균과 분산으로 두 개가 요구된다. 유사의 평균 크기로부터 확률분포형의 평균값이 결정되면, 하상에 존재하는 유사의 특성에 따른 입도 분포의 분산은 난수의 분산을 결정함으로써 모의할 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.21-21
• /
• 2022

충적하천의 하상과 제방은 흐름에 의해 쉽게 침식되는 사립자들로 구성되어 있다. 흐름이 더욱 강해지면 커다란 입자들도 움직이게 되고 더욱 커지면 결국 모든 입자들이 움직인다. 이렇게 흐름에 의해 하상과 제방을 구성하는 사립자들이 움직이기 시작하는 상태를 한계운동이라 하며, 이때의 흐름조건을 한계조건이라 한다. 한계조건은 이동상 수리학의 시작으로, 이때부터 흐름은 물과 유사의 혼합이라는 이상류가 되어 순수한 물의 흐름보다 더 복잡하게 된다. 개수로는 관수로와 달리 반드시 자유수면이 있으며, 따라서 물과 공기와의 마찰은 상대적으로 매우 작으므로 개수로의 전단응력 분포는 관수로와 달리 근본적으로 비대칭이다. 따라서 전단응력은 수로 바닥이나 측벽에서만 작용하게 된다. 한계조건은 이러한 추상적인 의미에 앞서 바닥이 침식되지 않는 하도나 수로의 설계 등에 기본적인 자료가 된다. 개수로에서 경계면의 전단응력을 힘으로 표시하는 것을 통상 소류력이라 하며, 개수로 경계면에서 전단응력의 분포도; 이른바 단면의 평균 전단응력의 개념을 도입하여 해석하고 설계기준으로 제시되고 있다. 본 연구에서는 자연하천과 유사한 조건의 건설기술연구원 하천실험센터의 급경사수로에서 연구를 진행하였으며, 기존 연구를 바탕으로 제작된 소류력 측정장치를 이용하였다. 하천의 설계나 평가에 적용되는 평균 소류력 개념은 복잡한 난류흐름에서 평가지표로써 대표하기 힘들기 때문에 유사 하천환경의 바닥에서 발생하는 소류력을 직접 측정하고자 연구를 진행하였고, 연구결과를 기존의 소류력 산정방법과 비교하였다. 본 연구에 사용된 장치는 실규모 실험을 위해 제작되었으며, 실규모 적용성 검토를 위해 실험실에서 충분한 검증실험을 거친 후 실규모 실험에 적용하였다.