• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.21-25
• /
• 2001

$\alpha$-Fe$_2$O$_3$ thin films were prepared on Si substrate by a pulsed laser deposition system and characterized by X-ray and Mossbauer spectroscopy. The appropriate conditions of pulsation was the power of 5.128 W/cm2 at on oxygen pressure of 0.1 Torr at a substrate temperature of 30$0^{\circ}C$. After that the film was heated at 80$0^{\circ}C$ for 1 day. The particles shape deposited on the film was ellipsoidal and the average length and width were 200~300 nm, 70~150 am respectively. The crystal structure was conformed to be of corundums symmetry with the hexagonal unit cell having a lattice constant of u = 5.03$\pm$0.05 $\AA$, c = 13.735$\pm$0.05 $\AA$. The average angles between the atomic spin and the magnetic hyperfine field of Fe ion were 38$^{\circ}$and 48$^{\circ}$ at above and blow the Morin transition temperature respectively. The Morin transition was found to occur at the temperature ranges from 200 K to room temperature and atomic spin direction was assumed to change from 48$^{\circ}$ to 80$^{\circ}$in respect to the c-axis.

• Journal of the Korean Magnetics Society
• /
• v.16 no.3
• /
• pp.157-162
• /
• 2006

In this study, a high sensitive giant magnetoresistance-spin valve (GMR-SV) bio-sensing device with high linearity and very low hysteresis was fabricated by photolithography and ion beam deposition sputtering system. Detection of the Fe-hemoglobin inside in a red blood and magnetic nanoparticles using the GMR-SV bio-sensing device was investigated. Here a human's red blood includes hemoglobin, and the nanoparticles are the Co-ferrite magnetic particles coated with a shell of amorphous silica which the average size of the water-soluble bare cobalt nanoparticles was about 9 nm with total size of about 50 nm. When 1 mA sensing current was applied to the current electrode in the patterned active GMR-SV devices with areas of $5x10{\mu}m^2 $ and $2x6{\mu}m^2 $, the output signals of the GMRSV sensor were about 100 mV and 14 mV, respectively. In addition, the maximum sensitivity of the fabricated GMR-SV sensor was about $0.1{\sim}0.8%/Oe$. The magnitude of output voltage signals was obtained from four-probe magnetoresistive measured system, and the picture of real-time motion images was monitored by an optical microscope. Even one drop of human blood and nanopartices in distilled water were found to be enough for detecting and analyzing their signals clearly.

• Journal of KIISE:Software and Applications
• /
• v.28 no.1
• /
• pp.52-63
• /
• 2001

필기 단어 인식 방법에는 낱자별 분할 및 낱자 단위 인식을 통해 인식하는 방법과 단어 사전을 이용하여 단어와 영상을 직접 비교하는 방법이 있다. 이 중 후자는 인식 대상이 되는 단어들이 작은 수의 어휘로 제한되었을 대 매우 효과적이다. 본 논문에서는 입력 영상이 주어졌을 때 자모를 순차적으로 탐색하고 그 결과의 최적 조합을 찾아 인식하는 사전을 이용한 필기 한글 단어 인식 방법을 제안한다. 입력 영상은 사전의 각 단어와의 매칭을 통해 인식된다. 단어는 필기 순서로 정렬된 자모열로 표현하고 입력 영상은 획들의 집합으로 표현한다. 단어의 자모들은 입력 영상으로부터 추출된 획들의 집합으로부터 단계적으로 탐색된다. 각 단계에서는 전 단계까지의 매칭 상태와 탐색하려는 자모의 형태로부터 자모가 존재할 것이라고 기대되는 정합 기대 영역을 설정한 후 그 안에서 자모 탐색기를 이용해 자모를 찾는다. 자모 탐색기는 획들의 집합으로 이루어진 복수의 자모 후보와 그 점수를 출력한다. 각 단계마다 생성된 자모 후보들은 최적의 단어 매칭을 찾기 위한 탐색 공간을 이룬다. 본 연구에서는 단어 사전을 trie로 구성하고, 탐색 과정에서 dynamic programming을 이용하여 효과적으로 탐색을 수행하였다. 또한 인식 속도를 향상시키기 위해 산전 축소, 탐색 공간 축소 등 다양한 지식을 이용하였다. 제안하는 방법은 무제약으로 쓰여진 필기 단어도 인식 할 수 있을 뿐 아니라, 동적 사전을 이용하기 때문에 사전의 내용이 변하는 환경에서도 적용할 수 있다. 인식 실험에서는 39개의 단어로 이루어진 사전에 대하여 613개의 단어 영상에 대해 실험한 결과 98.54%의 높은 인식률을 보임으로써 제안하는 방법이 매우 효과적임을 확인하였다. 아니라 곰팡이 균주도 실제 praxis에 적합하게 개발시킬수 있다. 따라서 앞으로 발효육제품제조에 있어 starter culture가 갖는 의미는 매우 중요하며 특히 짧은 숙성기간을 거치는 발효소시지의 제조에 있어서는 필수불가결한 공정의 한 분야로 자리잡게 될 것이다.큰 차이 없었으나 이중포장과 진공포장은 상당히 효과적임을 알 수 있었다.로는 18%에 비하여 22%가 더 적합한 것으로 생각되었다.$0.15{\sim}0.35%$이었다.irc}C$에서 $13.49{\times}10^{-3}$이었다. 이 값들을 Arrhenius식에 대입하여 구한 활성화 에너지는 24.795 kJ/Kmol이었다. 이 값으로부터 결정한 살균 포장약주 명가의 상용 저장 수명은 $10^{\circ}C$에서 2년, $20^{\circ}C$에서 1년 4개월, $25^{\circ}C$에서 1년 2개월 이었다. 서울의 매월 평균 온도를 기준으로 계산할 때 본제품의 상용저장기간은 1년 8개월이었다.로 반죽이 호화되고 가열시간이 그 이상으로 증가할 때도 반죽의 호화가 약간은 진행되지만 $90^{\circ}C$ 이상의 가열온도에서는 가열시간 0.5분 이내에 반죽의 호화가 급속히 일어나고 가열 시간을 증가시켜도 더이상의 호화는 일어나지 않았다. 같은 조건에서는 waxy corn starch 반죽의 호화 속도가 corn starch보다 더 빠른 것으로 나타났다. 대표적으로 52% 수분함량에서 반응속도상수(k)와 가열온도(T)사이의 관계식은 corn starch의 경우 $logk=11.1140-4.1226{\times}10^3(1/T)

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.144-155
• /
• 1998

The array weights that will maximize the SNR for any type of noise environment are determined by the function of the antenna design configuration and the directions of receiving target and interference signals. The conventional SLCs(sidelobe cancellers) using the SNR maximization perform worst from the saturation of the receiving system of main channel when the main antenna has pattern with high gain at the arrival angle of strong interference. In this paper, the new SLC is accomplished by using two independent antenna architecture. Main antenna is implemented with adaptive nulling, which is used for rejecting high-power interference primarily. Auxiliary antenna is realized with adaptive array for receiving interference signal to be suppressed completely, which has a characteristics of sufficient gain for every direction. The new SLC is implemented with above both antennas. We show that the new SLC, which consists of the adaptive nulling main antenna and the adaptive array auxiliary antenna, is useful in reducing the effect of strong interference like jammer, because the adaptive nulling at main antenna prevents its receiver and signal processor for saturation by strong interference. The proposed SLC has improved SNR over the conventional SLCs. The improved SNR at sidelobe region is typically more than 7 dB for a given test signal. Moreover, it improves the SNR of about 20 dB under strong interference at mainlobe.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.27-35
• /
• 2013

In this paper, a compact, broadband quasi-Yagi antenna utilizing balance analysis of the ultra-wideband microstrip-to-coplanar stripline(MS-to-CPS) balun is proposed. The antenna size was reduced by removing the reflector on bottom layer and ground plane is used as a reflector. A planar balun that transforms from microstrip(MS) to balanced coplanar stripline(CPS) is characterized in the amplitude and phase imbalances at CPS output ports are investigated and discussed. As compared with the conventional balun, the proposed MS-to-CPS balun demonstrated very wideband performance from 7 to over 20 GHz. From the simulation study, amplitude and phase imbalances are within 1 dB and ${\pm}5^{\circ}$, respectively. The implemented antenna provides very wide bandwidth from 6.9 to 15.1 GHz(74.5 %). The gain of the antenna is from 3.7 to 5.5 dBi, the front-to-back ratio is more than 10 dB, and the nominal radiation efficiency is about 94 %.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.11-17
• /
• 2001

In this paper, we propose a polarity decision carrier recovery algorithm for high order QAM(Quadrature Amplitude Modulation), which has robust and large frequency acquisition performance in the high order QAM modem. The proposed polarity decision PD(Phase Detector) output and its variance characteristic are mathematically derived and the simulation results are compared with conventional DD(Decision-Directed) method. While the conventional DD algorithm has linear range of $3.5^{\circ}{\sim}3.5^{\circ}$, the proposed polarity decision PD algorithm has linear range as large as $-36^{\circ}{\sim}36^{\circ}$ at ${\gamma}-17.9$. The conventional DD algorithm can only acquire offsets less than ${\pm}10\;KHz$ in the case of the 256 QAM while an analog front-end circuit generally can reduce the carrier-frequency offset down to only ${\pm}100\;KHz$. Thus, in this case additional AFC or phase detection circuit for carrier recovery is required. But by adopting the proposed polarity decision algorithm, we can find the system can acquire up to ${\pm}300\;KHz$at SNR = 30dB without aided circuit.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.18-24
• /
• 2007

We report broadband cascode amplifiers of a single-ended and a balanced amplifier for the millimeter-wave applications. The amplifiers were fabricated using 0.1 ${\mu}m\;{\Gamma}-gate$ PHEMT technology on GaAs substrate. The single-ended cascode amplifier was designed and fabricated by using shunt peaking technology. The fabricated single-ended cascode amplifier shows 3 dB bandwidth of 37 GHz($18.5{\sim}55.5$ GHz) and the maximum $S_{21}$ gain of 9.38 dB. The balanced cascode amplifier using tandem couplers achieves 3 dB bandwidth and the maximum $S_{21}$ gain of 44.5 GHz($21{\sim}65.5$ GHz) and 10.4 dB at 60 GHz, respectively. The 3 dB bandwidth of the balanced cascode amplifier shows 20% lager than the single-ended cascode amplifier.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.123-129
• /
• 2017

This paper proposes a new nonnegative matrix factorization (NMF) based direction-of-arrival (DOA) estimation method for multiple sound sources using a dual microphone array. First of all, sound signals coming from the dual microphone array are segmented into consecutive analysis frames, and a steered-response power phase transform (SRP-PHAT) beamformer is applied to each frame so that stereo signals of each frame are represented in a time-direction domain. The time-direction outputs of SRP-PHAT are stored for a pre-defined number of frames, which is referred to as a time-direction block. Next, In order to estimate DOAs robust to noise, each time-direction block is normalized along the time by using a block subtraction technique. After that, an unsupervised NMF method is applied to the normalized time-direction block in order to cluster the directions of each sound source in a multiple sound source environments. In particular, the activation and basis matrices are used to estimate the number of sound sources and their DOAs, respectively. The DOA estimation performance of the proposed method is evaluated by measuring a mean absolute error (MAE) and the standard deviation of errors between the oracle and estimated DOAs under a three source condition, where the sources are located in [$-35{\circ}$, 5m], [$12{\circ}$, 4m], and [$38{\circ}$, 4.m] from the dual microphone array. It is shown from the experiment that the proposed method could relatively reduce MAE by 56.83%, compared to a conventional SRP-PHAT based DOA estimation method.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.308-312
• /
• 2013

Active carbons with high specific surface area and micro pore structure were prepared from the coconut shell char using the chemical activation method of NaOH. The preparation process has been optimized through the analysis of experimental variables such as activating chemical agents to char ratio and the flow rate of gas during carbonization. The active carbons with the surface area (2,481 $m^2/g$) and mean pore size (2.32 nm) were obtained by chemical activation with NaOH. The electrochemical performances of hybrid capacitor were investigated using $LiMn_2O_4$, $LiCoO_2$ as the positive electrode and prepared active carbon as the negative electrode. The electrochemical behaviors of hybrid capacitor using organic electrolytes ($LiPF_6$, $TEABF_4$) were characterized by constant current charge/discharge, cyclic voltammetry, cycle and leakage tests. The hybrid capacitor using $LiMn_2O_4$/AC electrodes had better capacitance than other hybrid systems and was able to deliver a specific energy as high as 131 Wh/kg at a specific power of 1,448 W/kg.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.882-890
• /
• 2009

In this paper, we describe a compensation method that can be used for the situation where Loran receivers lose their phase lock to the received Loran signals when Loran signals are employed for the synchronization of national infrastructures such as telecommunication networks, electric power distribution and so on. In losing the phase lock to the received signals in a Loran receiver, the inner oscillator of the receiver starts free-running and the performance of the timing synchronization signals which are locked to the oscillator's phase is very severly degraded, so the timing accuracy under 1 us for a Primary Reference Clock (PRC) required in the International Telecommunications Union (ITU) G.811 standard can not be satisfied in the situation. Therefore, in this paper, we propose a method which can compensate the phase jump by using a compensation algorithm when a Loran receiver loses its phase lock and the performance evaluation of the proposed algorithm is achieved by the Maximum Time Interval Error (MTIE) of the measured data. From the performance evaluation results, it is observed that the requirement under 1 us for a PRC can be easily achieved by using the proposed algorithm showing about 0.6 us with under 30 minutes mean interval of smoothing with 1 hour period when the loss of phase lock occurs.