• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1994.05a
• /
• pp.51-53
• /
• 1994

담수는 인간의 생존에 필수적인 요소이다. 우리는 매일 일정량의 물을 섭취하고 있으며, 일상에서 직접, 간접적으로 물과 관련되지 않고서는 생활할 수 없다. 지구 표면의 약 70%가 물로서 덮여 있다고는 하지만 인간의 생활에 직접적인 이용가치가 있는 담수(지표수)는 전체 물의 용적의 2%에 지나지 않는다. 한국의 연평균 강수량은 1,274mm로서 세계 연평균 강수량인 970mm보다 많은 편이나 인구 1인당 연간 강수량은 약 3,000m3으로서 세계 평균인 34,000m3의 11분의 1에 지나지 않는다. 수자원총량중 지하침투와 증발에 의해 손실되는 양을 제외한 하천유출량은 전체의 55%인 697억m3으로서 이것이 곧 가용수자원량이다. 그러나 하절기 강우집중도가 높은 우리나라 실정에서는 가용수자뭔량중 수자원총량의 37%가 홍수시 유출되고 실제 이용량은 수자원총량의 18%인 230억m3에 불과하여 인구증가와 함께 수자원의 가치가 더욱 증대하고 있는 실정이다. 더우기 지하수 이용량은 19억m3에 불과함에 따라 우리나라는 실제 이응수자 원량의 90% 이상을 지표수에 의존하고 있으며, 그 중 약 40%가 호소수로 구성되어 있다. 이러한 수자원 이용효율의 취약성으로 인해 제한된 수자원 용량과 생활 및 농공용수의 과수요에 따른 불균형으로 근래 많은 하천이 갈수기나 평수기시 친천화되어 가고 있어 수중생태계에 큰 위협을 주고 있다. 또한 이에 더하여 산업발달과 함께 수질오염원은 양적으로는 물론 질적으로도 증가일로에 있어 기존의 유기 및 중금속 오염물질을 포함해 수많은 신생 유기화합물질이 수계에 유출되고 있으며, 이에 더해 질소 및 인으로 대표되는 영양물질의 유입과다로 국내 대다수의 호수가 부영양화의 새로운 위협에 직 면해 있다. 우리나라에는 적은 유입유량에 큰 저수용량 및 긴 체류시간으로 대표되는 대규모 자연호는 없으며, 대부분이 매단위 강을 막아 형성된 체류시간 1년 이하의 인공호로서 그 중 안동호, 충주호, 대청호 등은 비교적 체류시간이 긴 호소형 인공호로, 팔당호나 기타 대부분의 호수는 체류시간이 짧은 하천형 인공호로 대별된다(Table 1). 이처럼 국내 호소는 국외의 자연 호와는 다른 구조적 특성을 가짐에 따라 부영양화 특성 역시 매우 상이하고, 호소형 인공호와 하천형 인공호간의 차이 역시 현저하여 일률적인 관리대책을 설정하기가 어려운 실정에 있다. 또한 각 호수의 유역특성이 상이함에 따라 호수별로 유역 오염원의 오염부하율이 현저히 달라(Table 2) 호수에 따른 특성적인 유역관리(Lake-specific management)가 요구되고 있다 정상상태(Steady state)가 아닌 국내 호소에 대해 국외 자연호의 인단순모델 (Simple phosphorus budget model)을 그대로 적용하는 것에 다소 무리한 점이 따르나, 평균적인 개념으로 OECD의 유역부하량 및 호소특성에 따른 부영양화 판정모델을 적용한다면, 국내 주요 호수는 모두 부영양 수준에 있다. 또 각 호수별로 부영양화 제어를 위해 요구되는 인의 삭감부하량은 상당량이 되어 현실적으로 관리가 이미 어려운 실정에 와 있다. 호수의 부영양화는 조류 발생으로 이어지며, 그에 따른 폐해는 각종 형태로 나타나는데 대표적으로 이취미 발생이나 유해조류에 의한 독성물질의 배출, 정수처리 과정의 THM 발생등이 주로 문제가 되고 있다. 따라서 국내 호수의 구조적 특성별 부영양화 실태를 파악하고 그에 따른 영향 및 관리방안에 관한 종합적 고찰이 차후 수질관리를 위해 요구되고 있으며, 특히 납조류로 대표되는 유해조류의 독성영향에 관한 연구는 시급한 실정에 있다.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.47-52
• /
• 2009

A Lagrangian particle tracking model coupled with the Princeton Ocean Model were used to estimate the average residence time of coastal water in Masan Bay, Korea. Our interest in quantifying the transport time scales in Masan Bay was stimulated by the search for a mechanistic understanding of this spatial variability, which is consistent with the concept of spatially variable transport time scales. Tidal simulation was calibrated through a comparison with the results of semi-diurnal current and water elevation measured at the tidal stations of Masan, Gadeokdo. In the model simulations, particles were released in eight cases, including slack before ebb, peak ebb, slack before flood, and peak flood, during both spring and neap tides. The averaged values obtained from the particle release simulations were used for the average residence times of the coastal water in Masan Bay. The average residence times for the southeastern parts of Somodo and the Samho River, Masan Bay were estimated to be about 20~50days and 70~80days, respectively. The spatial difference for the average residence time was controlled by the tidal currents and distance from the mouth of the bay. Our results might provide useful for understanding the transport and behavior of coastal water in a bay and might be used to estimate the dissimilative capacity for environmental assessment.

• Journal of Veterinary Clinics
• /
• v.24 no.1
• /
• pp.5-9
• /
• 2007

The purpose of this study was to examine the allometric analysis of roxithromycin using pharmacokinetic data. The pharmacokinetic parameters used were $half-life(t_{1/2})$, mean residence time (MRT), clearance (Cl) and volume of distribution at steady state $(V_{ss})$. Relationships between body weight and the pharmacokinetic parameter were based on the empirical formula $Y=aW^b$, where 'Y' is $t_{1/2}$, MRT, Cl, or $V_{ss}$, W the body weight and 'a' is an allometric coefficient (intercept) that is constant for a given drug. The exponential term, 'b', is a proportionality constant that describes the relationship between the pharmacokinetic parameter of interest and body weight. As results of the allometric analyses, the logarithms of $t_{1/2}$, MRT, Cl, and $V_{ss}$ were linearly related to the logarithms of body weight. Results of the current analyses could provide information on appropriate doses of roxithromycin for all species.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.1-19
• /
• 2023

Bikes have recently emerged as an alternative to carbon neutrality. To understand the demand for public bikes, we endeavored to estimate travel frequency of public bike by considering the intermediate stops. Using the GPS trajectory data of 'Ttareungyi', a public bike service in Seoul, we identified a stay point and estimated travel frequency reflecting population, land use, and physical characteristics. Application of map matching and a stay point detection algorithm revealed that stay point appeared in about 12.1% of the total trips. Compared to a trip without stay point, the trip with stay point has a longer average travel distance and travel time and a higher occurrence rate during off-peak hours. According to visualization analysis, the stay points are mainly found in parks, leisure facilities, and business facilities. To consider the stay point, the unit of analysis was set as a hexagonal grid rather than the existing rental station base. Travel frequency considering the stay point were analyzed using the Zero-Inflated Negative Binomial (ZINB) model. Results of our analysis revealed that the travel frequency were higher in bike infrastructure where the safety of bike users was secured, such as 'Bikepath' and 'Bike and pedestrian path'. Also, public bikes play a role as first & last mile means of access to public transportation. The measure of travel frequency was also observed to increase in life and employment centers. Considering the results of this analysis, securing safety facilities and space for users should be given priority when planning any additional expansion of bike infrastructure. Moreover, there is a necessity to establish a plan to supply bike infrastructure facilities linked to public transportation, especially the subway.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.117-129
• /
• 2018

In this paper we will discuss two different layout concepts which can be applied to rail-vehicle assembly factory. The existing system is based on the traditional flow line, and the suggested system is based on the fixed position layout. The main factors which affect on the system performances are the variation of process time, shortage rate of part and the shortage period. Simulation experiments indicate that the fixed position layout is better with respect to the throughput, mean flow time per vehicle and the mean flow time per fleet. Furthermore, the fixed position layout is more robust than the flow line because performance measures are insensitive to the variations of factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.485-492
• /
• 2013

The effect on collection efficiency with 2-stage vortex finder diameter and back mixing of solid flow due to swirling intensity, turbulence eddies, wall bouncing using the residence time distribution of particle flow in a common and modified cyclone. Higher collection efficiencies of fly ash in a modified cyclone(S = 13, 15cm) are showed than common cyclone. Collection efficiency in modified cyclone was highest at 2-stage vortex finder diameter, S = 13 cm. Variances of residence time distribution and average residence times of glass bead were increased with a diameter(S) of 2-stage vortex finder due to swirling intensity and turbulence eddies. Back mixing of solid flow in a modified cyclone were increased with a gas inlet velocity and showed higher than a common cyclone.

• Korean Journal of Ecology and Environment
• /
• v.33 no.3 s.91
• /
• pp.295-303
• /
• 2000

The water clarification efficiency was examined in a shallow wetland where dense vegetation was formed naturally in an abandoned paddy field. And, also two enclosure experiments were carried out to measure the effects of materials exchange between sediment and the overlying water with the existence of vegetation and accumulated litter. The hydraulic retention time of wetland was regulated in 1.2 day. The removal rates of SS (56%) and $NO_3-N$ (61%) were high, considering its short retention time. However, removal efficiencies of VSS (28%), COD (14%), DOC (1%),and TP (0.2%) were relatively lower. This low removal efficiencies were thought to be due to the release of dissolved form of organic matter and phosphorus from the sediment. Most of constituents except nitrate were higher in the enclosure at the beginning of enclosure installation than that of the outflowing water from wetland. And then, it has fluctuated and decreased with time. The wetland was in equilibrium state of settling, accumulation of organic debris, and regeneration of dissolved material from sediment. So ultimately high primary production by dense vegetation in the wetland may be the reason of unfavorable or low treatment efficiency of wetland after many years of operation for wastewater treatment. However, the water quality of effluent from the wetland showed smaller variation and better condition than that of inflow, especially during storm events. It can be concluded that this wetland is suitable for the improvement of water quality from nonpoint sources.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.438-445
• /
• 1993

Raw cow manure was treated by a 4-step integrated system with phase separation anaerobic digestion and algal culture. When the first methane fermentation was performed by the effluent from the acid fermenter with retention time of 4 days, the elrerage blogas production rate was 977m1/1 culture/day Gas productivity compared to conventional single-stage anaerobic digestion increased up to 31.4%. As the 2nd methane fermenter was fed by the effluent from the first methane fermenter with 4 days of retention time, average amount of 428m1/1 culture/day of biogas was produced. The reduction rate of COD in the effluent from the acid fermenter, the 1st and the 2nd methane fermenter were 71.8%, 42.6% and 24.0% respectively. Finally, we examined algal treatment process for the effluent from the 2nd methane fermenter. A semi-continuous culture of Chlorella sp. PSH3 was conducted by feeding the effluent with retention time of 10days. In this process, the production rate of algal biomass and COD reduction rate were averaged 1.8g/1 culture/day(2.8$\times$106 cells/ml) and 73%, respectively. Through the 4-setp treatments, the total chemical oxygen demand was reduced from 51,300ppm to 85ppm. Therefore, the reduction rate of total chemical oxygen demand reached about 99.8%. The results indicate that the integrated system could be applicable for treatment of organic wastes, concurrently producing biogas and algal biomass.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.119-129
• /
• 2019

Although line production systems with finite buffers have been studied over several decades, except for some special cases there are no explicit expressions for system performances such as waiting times(or response time) and blocking probability. Recently, a max-plus algebraic approach for buffer-sharing systems with constant processing times was introduced and it can lead to analytic expressions for (higher) moment and tail probability of stationary waiting. Theoretically this approach can be applied to general processing times, but it cannot give a proper way for computing performance measures. To this end, in this study we developed simulation models using @RISK software and the expressions derived from max-plus algebra, and computed and compared blocking probability, waiting time (or response time) with respect to two blocking policies: communication(BBS: Blocking Before Service) and production(BAS: Blocking After Service). Moreover, an optimization problem which determines the minimum shared-buffer capacity satisfying a predetermined QoS(quality of service) is also considered.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.265-267
• /
• 2000

가공물을 한 개씩 작업하는 단일작업기계와 여러 개의 가공물을 한꺼번에 작업하는 배치 기계를 포함한 재진입 라인 시스템에서 각 기계가 고장이 일어날 수 있고, 불량품이 발생할 때, 이 시스템에서의 가공물의 생산주기를 구하는 방법을 Mean Value Analysis(MVA)를 이용하여 제시하고자 한다. 배치 기계와 고장 발생, 불량품 발생 등의 이유의 이런 시스템은 승법형 대기행렬 모형으로 모형화 할 수 없다. 본 논문에서는 각 기계에서의 체류 시간을 구하여 전 시스템의 생산 주기를 구하는 방법을 MVA 를 이용하여 제시한다.