The Journal of Korean Institute of Communications and Information Sciences
/
v.21
no.2
/
pp.427-434
/
1996
Hypercube has some advantages such as small diameter between nodes and relatively simple routing scheme, so it is one of the most popular interconnection networks used in real systems. But to make this structure more practical, it is required to reduce its diameter and to be able to expand it to any number of nodes. In this study, we proposed a Crossed Incomplete Hypercube structure. This scheme is based on the previous Crossed Hypercube topology that reduces the diameter about 50% and has the same complexity with general hypercube and is able to expand to any number of nodes. We also proposed a fixed routing scheme for this structure. In the repect of the average path and the average routing time, this structure shows an enhanced performance about 30% and it is enhanced about 20% ifn the average traffic density.
This study was carried out to provide standardization for mushroom production of high quality at farmhouse. The standardization does much to improve merchantable quality, distribution efficiency and fair dealings by shipping of the standard agricultural products. Therefore, modification of these standards is required to fit farmhouse situations. The standardization for production of Pleurotus eryngii of high quality follows like this. A grades were above 90 g at average weight, more 50 mm at stipe thick, 1.6~1.7 at stipe length/stipe thick rate and 1.1~1.2 at pileus diameter/stipe thick ratio. B grades were more 45 g at average weight, above 40 mm at stipe thick, 1.8~1.9 at stipe length/stipe thick ratio and 1.2~1.4 at pileus diameter/stipe thick ratio.
Journal of the Korean Society of Propulsion Engineers
/
v.14
no.5
/
pp.51-56
/
2010
An experimental study was performed to understand spray characteristics of the V type rotating fuel nozzle with orifice diameters by using high speed rotational system. The experimental apparatus consist of a high speed rotational system, fuel injection system and acrylic case. The droplet size and velocity were measured by PDPA(Phase Doppler Particle Analyzer) and spray was visualized by using Nd-Yag laser-based flash photography. From the test results, droplet size is reduced with increasing orifice diameter up to the critical value. When increasing orifice diameter over than this critical value, droplet size is not decreased with increasing the orifice diameter. This is due to the irregular distribution of the liquid sheet around the inner surface of injection orifice.
This study was conducted to investigate the changes in soil temperature, soil moisture content, light availability (photosynthetically active radiation, PAR) and diameter growth in 46-year-old Korean pine (Pinus koraiensis Siebold et Zuccarini) plantation located in Gwangneung experimental forest after 4 years from thinning. Three different thinning intensities [control, 45%(T45), and 60%(T60) basal area reduction] were applied in 2004. Mean soil temperature and soil water content were $8.9^{\circ}C$ and 14.3% for control, $10^{\circ}C$ and 16.1% for T45 and $10.2^{\circ}C$ and 16.1% for T60, respectively. Mean soil temperature and moisture content were significantly different among the treatment plots (p<0.05). Mean PAR in control, T45 and T60 was 44, 143 and178 ${\mu}mol/m^2$/sec, respectively and the differences were also statistically significant among the treatment plots (p<0.05). Mean annual diameter growth in control, T45 and T60 was 0.4, 1.5 and 1.2 mm, respectively. Diameter growth of Pinus koraiensis was steadily increased after thinning in comparison to control. Consequently, the results suggested that soil temperature, soil moisture content and light availability were likely to last beyond the 4 years after thinning in this Korean pine plantation.
Korean Journal of Agricultural and Forest Meteorology
/
v.3
no.1
/
pp.44-54
/
2001
This study was conducted to estimate microclimate of natural deciduous forest in national forest of Pyungchang, Kangwon province and to investigate the effects of the microclimatic conditions on the periodic annual increment of diameter by site types. In this study, site was first classified by nine types considering both elevation (higher than 1,000 m, 700∼1,000 m, and lower than 700 m) and topographical conditions (ridge, slope and valley). For each of site types, diameter growth was measured by using increment borer and periodic annual increment of diameter was then analyzed. A topoclimatological technique, for estimating microclimatic conditions, which make use of empirical relationships between the topographical factor and the climatic normals in the study area was applied to produce monthly mean, maximum and minimum temperatures, relative humidity, precipitation and hours of sunshine. From these monthly estimtes, 17 weather variables such as warmth index, coldness index, index of aridity etc. which affect the diameter growth were computed for each of site types. The periodic annual increment of diameter was then correlated with and regressed on the 17 weather variables to examine effects of microclimatic conditions on the diameter growth by site types. From the correlation analysis, it was found that the diameter growth by site types was positively correlated with all of 17 weather variables except the warmth index. Especially, the conditions such as high relative humidity and large amount of sunshine hours provide favorable environment for the growth of diameter. On the other hand, it was also found that diameter growth was negatively iufluenced by warmth index. According to the regression analysis, the periodic annual increment of diameter could be well predicted by index of aridity and mean relative humidity for the growing season.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2002.04a
/
pp.77-77
/
2002
초소형 공중발사체 설계 시 하이브리드 모터의 적용가능성에 대한 연구를 실시하였다. HTPB/LOX를 추진제로 하여 마차바퀴형 연료 그레인, 산화제 탱크 가압방식을 사용하였고, 성능특성을 계산하기 위하여 하이브리드 연료의 연소율이 일정하다고 가정 하였다. 본 연구에 사용된 임무는 중량 3.5kg의 나노위성을 근지점 고도 200km, 원지점 고도 1,500km의 타원궤도로 진입시키는 것을 목적으로 하는 로켓의 1단 부분에 관한 것으로 1단의 발사속도는 M=1.3, 발사고도는 12km, 연소종료 고도는 40km이다. 1단에 대한 페이로드 중량은 127.5kg이고, 속도증가분($\Delta$V)은 3,330m/s이다. 모선은 F-4E를 사용하였고 모선의 특성상 발사체의 총 중량이 1,000kg이하로 제한되고 길이와 직경이 5m${\times}$5m로 제한되나 1단에 대한 길이의 제한조건은 현재까지 명확히 정립되지 않은 상태이다. 설계과정에서의 변수는 연료 그레인 포트 개수, 초기 산화제 플럭스, 연소실 압력을 사용했고, 설계 제한조건은 추진제 중량, 평균 비추력, 평균 추력, 연소시간, 1단 길이, 직경, 연소시간이고, 이들의 범위는 모선의 특성과 초소형 공중발사체의 임무특성에 맞게 설정하였다.
Proceedings of the Korea Air Pollution Research Association Conference
/
2003.11a
/
pp.405-406
/
2003
현재 우리나라 입자상물질에 대한 대기환경기준은 공기역학적 직경 10 $\mu\textrm{m}$ 이하인 PM$_{10}$ 기준이 연평균 70 $\mu\textrm{g}$/㎥ 및 일평균 150 $\mu\textrm{g}$/㎥이다. 그러나 영국의 PM$_{10}$ 기준은 24시간 평균 50 $\mu\textrm{g}$/㎥로 강화하여 입자상물질에 의한 건강피해를 줄이기 위해 노력하고 있다(EPAQS, 1995). 분진은 공기역학적 직경 2.5 $\mu\textrm{m}$를 기준으로 미세입자와 거대입자로 나누어지는 쌍극분포의 형태(Whitby et al., 1972)를 나타내며, 분진이 인체에 미치는 영향에 관한 많은 연구를 통해 10 $\mu\textrm{m}$ 이하의 입자가 호흡성 분진으로 인체에 더 유해한 영향을 미치고 있음이 밝혀졌다(Emison, 1988). (중략)
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2017.04a
/
pp.82-82
/
2017
현대농업에서 잡초를 조기에 제거하지 못할 경우 작물의 성장에 장애를 초래하므로 제초작업은 매우 중요하다. 최근 친환경 고품질 농산물에 대한 소비자의 관심과 고품질 농산물에 대한 가격 차별화 등으로 제초제를 사용하지 않은 친환경 재배가 주목을 받고 있다. 제초제는 농작물에 따라 분류가 되어있어 종류마다 효과가 다르고 사용방법이 종류에 따라 어떻게 사용되는지 알기가 쉽지 않아 이에 따른 피해 또한 무시 할 수 없다. 현재 상용화되어 있는 제초기는 굴곡이 있는 고랑의 잡초를 효율적으로 제거하기 어려워 밭작물 제초작업에 사용하기 부적합하다. 밭작물 재배 기간에 행해지는 고랑의 제초작업은 평지보다 더 많은 힘이 필요하고 일반적인 제초기로는 좋은 결과를 얻기 어렵다. 또한 제초 작업시 농작물 피해와 멀칭 비닐을 손상시키는 문제가 발생 하고 있다. 따라서 밭작물에 효율적인 잡초를 제거하기 위해 굴곡이 있는 지형의 잡초를 제거하기 위한 제초기 개발이 반드시 필요하다. 밭작물용 제초기를 개발하기 위해 굴곡이 있는 고랑의 잡초 제거가 가능한 제초날의 형상 설계가 우선되어야 하며, 고랑의 잡초제거를 위한 제초날 형상설계를 하기 위해 우리나라 주요 밭작물 재배지의 이랑 넓이, 고랑 깊이 및 고랑 폭을 조사 분석하였다. 조사 작물 대상은 양파, 마늘, 무, 배추, 고추, 당근, 감자 총 7가지 작물을 대상으로 조사하였으며, 각 작물들의 이랑 넓이와 고랑 깊이 및 폭의 평균치를 구하여 제초날 설계에 적용하고자 하였다. 범위가 있는 수치는 높은 수치를 기준으로 계산하였으며 고랑의 평균 폭은 34.2cm이고, 고랑의 평균 깊이는 22.1cm가 나타났다. 잡초를 효과적으로 제거하기 위해 제초날의 형상은 고랑의 크기 및 형태에 맞게 원형으로 설계를 하여야 한다. 형상 설계는 밭작물 고랑 평균직경 및 평균높이를 고려하고, 제초작업시 제초날이 작물 및 멀칭비닐의 손상 하지 않도록 하기 위해 직경은 고랑 평균 폭의 75% 정도 치수로 형상을 설계하고, 제초날 깊이는 고랑의 굴곡형태을 고려할 때 제초날 반경의 70%정도로 설계하여 원형제초날 폭 250mm, 제초날 깊이 87.5mm로 설계해야 할 것으로 분석 되었다.
Background: Background: Computed tomography (CT) is the main tool for detecting abnormalities of the thoracic aorta, but conventional CT only shows the cross-sectional images. These CT images have some limitations fo accuratly measuring the thoracic aortic diameters at various levels. Multidetector computed tomography (MDCT) overcomes these limitations. We measured the thoracic aortic diameter perpendicular to the loop-shaped thoracic aortic course and this was studied in relation to age, gender, height, weight, the body surface area, the body mass index and the presence of hypertension. Material and Method: Thirty hundred thirty one patients (males: 141 patients and females: 190 patients) who had no abnormalities of the thoracic aorta were investigated using MDCT aortography. They were divided into three age categories: 20~39 years old, 40~59 years old and over age 60. The image was reformed with multiplanar reconstruction and the diameter of the aorta was measured perpendicular to the aortic course at 5 anatomic segments. Level A was the mid-ascending aorta, level B was the distal ascending aorta, level C was the aortic arch, level D was the aortic isthmus and level E was the mid-descending aorta. Result: The mean age was 49.5 years old for males and 54.9 years old for females (p<0.05). The mean diameter of the thoracic aorta at level A was 31.1 mm, that at level B was 30.2 mm, that at level C was 26.5 mm, that at level D was 24.0 mm and that at level E was 22.6 mm. The diameters at all the levels were gradually increased with age. Hypertensive patients had larger diameters than did the non-hypertensive population. There was a positive correlation between the ascending aortic diameter (levels A&B) and height and the body surface area, but there were no statistical differences at the aortic arch (level C) and the descending aorta (levels D&E). There were no statistical differences of the weight and body mass index at all levels. Conclusion: The diameters of the thoracic aortas were directly correlated with gender, age and hypertension. Height and the body surface area were only correlated with the ascending aorta. Weight and the body mass index have no statistical difference at all levels. We measured the age related thoracic aortic diameters and the upper normal limits and we provide this data as reference values for the thoracic aortic diameter in the Korean population.
In accordance with a change in the management information system containing the management record and planning for the entire national forest in South Korea by an amendment of the relevant law (The national forest management planning and methods, Korea Forest Service), in this study, average, the maximum, and the minimum values for DBH were presented while only average values were required before the amendment. In this regard, there is a need for an estimation algorithm by which all the existing values for DBH established before the revision can be converted to the highest and the lowest ones. The purpose of this study is to develop an estimation equation to automatically show the minimum and the maximum values for DBH for 12 main tree species from the data in the national forest management information system. In order to develop the estimation equation for the minimum and the maximum values for DBH, there was exploited the 6,858 fixed sample plots of the fifth and the sixth national forest inventory between in 2006 and 2015. Two estimation models were applied for DBH-tree age and DHB-tree height using such growth variables as DBH, tree age, and height, to draw the estimation equation for the maximum and the minimum values for DBH. The findings showed that the most suitable model to estimate the minimum and the maximum values for DBH was Dmin=a+bD+cH, Dmax=a+bD+cH with the variables of DBH and height. Based on these optimal models, the estimation equation was devised for the minimum and the maximum values for DBH for the 12 main tree species.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.