• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.169-175
• /
• 2019

This study was carried out to produce the health functional food maesil cheong by replacing sucrose with isomaltooligosaccharide and fructooligosaccharide. The substitution levels of these oligosaccharides were between 10% and 100%. A 1:1 (w/w) mixture of maesil and sugar was adopted for preparing maesil cheong. The pH of maesil cheong remained unchanged (between 2.72 and 3.00) during 90-day storage period, regardless of oligosaccharide content. Citric and malic acids were identified in maesil cheong; citric acid accounted for 71-82% of the total organic acid content. Sucrose was completely liquefied in the sample after 30 days and was hydrolyzed steadily into fructose and glucose over the storage period. More than 75% of isomaltooligosaccharides remained in maesil cheong after 90 days when sucrose was completely replaced with isomaltooligosaccharide. However, fructooligosaccharides were mostly decomposed at the end of storage period. Thus, isomaltooligosaccharides may be suitable for acidic maesil cheong products to expect its health functional effect.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.71-78
• /
• 2021

Green areas and the area of available horizontal surfaces are gradually decreasing due to the overcrowding of buildings. It is adversely affecting the urban climate and ecosystem. However, the recognition of the importance of green areas is gradually increasing. As a result, the importance of wall greening using vertical surfaces is growing. However, despite the fact that domestic wall greening guidelines and institutions related to orientations restrict planting. there was no study to determine whether there were actual differences in plant growth due to orientations. Therefore, this study compared and analyzed the plant growth characteristics by orientations to apply actual wall greening to cities. The experiment was conducted from May to September 2020. First of all, three octave walls were constructed to measure the temperature, the illumination, and the length of the plants once a week. The plants included Parthenocissus tricuspidata, Hedera rhombea, and Euonymus radicans cv. Aueonmarinata Rehd plants. As a result of the study, Parthenocissus tricuspidata was prolific in the north, and Hedera rhombea, and Euonymus radicans cv. Aueonmarinata Rehd plants were prolific in the south. All three types of plants were prolific in June-July, and the Parthenocissus tricuspidata was prolific in grass-growing, and in August, all the walls were 100% covered. Hedera rhombea had the lowest rate of herbaceous growth, and the vertical coverate was also lower at an average of 45%, but among the three plants, the sheath of the horizontal surface coverate was the highest. Euonymus radicans cv. Aueonmarinata Rehd was low in the speed of herbaceous growth, and finally, the walls were 100% covered except for the north and northwest directions. It was found that not all plants used for wall greening show the same growth, and the difference in growth varies more depending on plants than the effect of orientations. Therefore, it is better to identify the characteristics of plant growth and plant suitable plants for each directions.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.177-186
• /
• 2021

For disaster management and mitigation of earthquakes in Korea Peninsula, active fault investigation has been conducted for the past 5 years. In particular, investigation of sediment-covered active faults integrates geomorphological analysis on airborne LiDAR data, surface geological survey, and geophysical exploration, and unearths subsurface active faults by trench survey. However, the fault traces revealed by trench surveys are only available for investigation during a limited time and restored to the previous condition. Thus, the geological data describing the fault trench sites remain as the qualitative data in terms of research articles and reports. To extend the limitations due to temporal nature of geological studies, we utilized a terrestrial LiDAR to produce 3D point clouds for the fault trench sites and restored them in a digital space. The terrestrial LiDAR scanning was conducted at two trench sites located near the Yangsan Fault and acquired amplitude and reflectance from the surveyed area as well as color information by combining photogrammetry with the LiDAR system. The scanned data were merged to form the 3D point clouds having the average geometric error of 0.003 m, which exhibited the sufficient accuracy to restore the details of the surveyed trench sites. However, we found more post-processing on the scanned data would be necessary because the amplitudes and reflectances of the point clouds varied depending on the scan positions and the colors of the trench surfaces were captured differently depending on the light exposures available at the time. Such point clouds are pretty large in size and visualized through a limited set of softwares, which limits data sharing among researchers. As an alternative, we suggested Potree, an open-source web-based platform, to visualize the point clouds of the trench sites. In this study, as a result, we identified that terrestrial LiDAR data can be practical to increase reproducibility of geological field studies and easily accessible by researchers and students in Earth Sciences.

• Korean Journal of Poultry Science
• /
• v.48 no.3
• /
• pp.133-142
• /
• 2021

The purpose of this study was to investigate whether enzyme-hydrolyzed poultry by-product meal (EHPBM) is more effective as a protein source than poultry by-product meal (PBM) and soybean meal (SBM) for broiler chickens. A group of 300 one-day-old broiler chicks was randomly allocated to three treatments with five replicates (20 birds/replicate) for five weeks. The treatments consisted of basal diets containing 1) SBM, 2) PBM, and 3) EHPBM. The EHPBM-fed group (1,853 g±125.60) showed the highest final body weight (P<0.05) when compared to the PBM-fed group (1,723 g±76.81) and SBM-fed group (1,545 g±62.31). The feed conversion ratio of the EHPBM treatment group (1.740±0.104) was significantly higher (P<0.05) than those of the SBM (1.653±0.056) and PBM groups (1.674±0.072). It can be speculated that the increased feed intake in the EHPBM group led to higher body weight gain and FCR. There was no significant effect of treatments on internal organ weight except for the bursa of Fabricius. Blood biochemical characteristic analysis showed that aspartate aminotransferase and alkaline phosphatase levels were higher in the EHPBM and PBM groups (P<0.05), probably due to the strained liver caused by the rapid growth of birds. In conclusion, EHPBM may partly replace conventional dietary protein sources such as soybean meal or poultry by-product meal and can be used to improve the productivity of broilers.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.298-309
• /
• 2021

In this study we sought to develop a simultaneous analysis method for cis-bixin and cis-norbixin, the main components, to detect annatto pigment in food. To establish the optimal test method, the HPLC analysis methods of the European Food Safety Authority (EFSA), Japan's Ministry of Health, Labor and Welfare (MHLW), and National Institute of Food and Drug Safety Evaluation (NIFDS) were compared and reviewed. In addition, a new pretreatment method applicable to various foods was developed after selecting conditions for simultaneous high-performance liquid chromatography (HPLC) analysis in consideration of linearity, limit of detection (LOD), limit of quantification (LOQ), and analysis time. The HPLC analysis method of NIFDS showed the best linearity (R² ≥ 0.999), exhibiting low detection and quantification limits for cis-norbixin and cis-bixin as 0.03, 0.05 ㎍/mL, and 0.097, 0.16 ㎍/mL, respectively. All previously reported pretreatment methods had limitations in various food applications. However, the new pretreatment method showed a high recovery rate for all three main food groups of fish meat and meat products, processed cheese and beverages. This method showed an excellent simultaneous recovery rate of 98% or more for cis-bixin and cis-norbixin. The HPLC analysis method with a new pretreatment method showed high linearity with a coefficient of determination (R²) of 1 for both substances, and the accuracy (recovery rate) and precision (%RSD) were 98% and between 0.4-7.9, respectively. From this result, the optimized analytical method was considered to be very suitable for the simultaneous analysis of cis-bixin and cis-norbixin, two main components of annatto pigment in food.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.120-129
• /
• 2021

Securing a range of wheat resources is of particular importance with respect to wheat breeding, as it provides a broad genetic foundation. Although wheat breeders have used different wheat germplasms as material resources in current breeding systems, the traits of most germplasms collected from foreign countries differ from the unique traits that have evolved in the Korean environment. In this study, conducted over a 2-year period (2018 and 2019), we therefore evaluated the agricultural traits 1,967 wheat germplasms collected not only in Korea but also worldwide. During the period from sowing to February, the average temperature in 2019 was greater than 1℃, whereas from March to June, the average temperature was approximately 0.9℃ higher in 2018. Compared with the growth recorded in 2018, the stem length in 2019 increased by approximately 20 cm in 2019, and there were notable differences heading date and maturation between 2018 and 2019. In 2019, the heading dates of 973 and 713 wheat resources were earlier and later than those in 2018, respectively. Moreover, stem length was found to be highly correlated with the heading date and maturation. In Korea, where the rainy season and tine of rice transplantation overlap with the time of wheat harvest, early flowering time with high grain yield has been the most important selection target with respect to wheat breeding. We anticipate that the findings of this study will provide would use a foundation for the selection of elite materials and the development of resource core-sets for Korean wheat breeding programs.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.153-160
• /
• 2018

Purpose : We retrospectively analyzed doses of each radiation therapy technique used in the treatment for left breast cancer patients after partial mastectomy through dose results for normalorgans and tumor volume to use this as a clinical reference for radiation therapy of domestic left breast cancer patients. Materials and Methods : 40 patients who underwent partial mastectomy on left breast cancer were classified in 3 treatment methods. The treatment plan was evaluated by HI(homogeneity index), $D_{95%}$, and CI(conformity index), and the $V_{hot}$ for gross tumor volume and clinical target volume of each treatment method. In Cyberknife treatment, tumor volume was the same as high dose volume in the other techniques, so no consideration was given to clinical target volume. Treatment plan evaluation for normal organs were evaluated by mean dose on ipsilateral lung, heart, left anterior descending artery, opposite breast and lung, and non-target tissue. Result : Treatment with volumetric arc radiotherapy(VMAT) showed $95.84{\pm}0.75%$ of $D_{95%}$ on the clinical target volume, significantly higher than that of 3D-CRT. The $D_{95%}$ value of the total tumor volume was slightly higher than the other treatments. In Cyberknife treatment, the dose to the normal organs was significantly lower than other treatments. Overall, the maximum dose and mean dose to the heart were $26.2{\pm}6.12Gy$ and $1.88{\pm}0.2Gy$ in VMAT treatment and $20.25{\pm}9.35Gy$ and $1.04{\pm}0.19Gy$ in 3D-CRT therapy, respectively. Conclusion : In comparison on 3D-CRT and VMAT, most of the dosimetric parameters for the evaluation of the treatment plan showed similar values, so that there is no significant difference in treatment plan evaluation. It is possible to select the treatment method according to the patient's anatomical structure or possibility of breath control. Cyberknife treatment is very useful treatment for normal organs because of its accurate dose exposure to the tumor volume However, it has restrictions to treat the local area, to have relatively long treatment time and to involve invasive procedure.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.293-301
• /
• 2019

The experiment was conducted to determine the performance of DME combustion gas when used as a fuel for DME burner for raising temperature and $CO_2$ concentration in greenhouse and also to examine its effects on chlorophyll content, and fresh and dry weight of lettuce and Chinese cabbage. DME-1 and DME-2 treatments consisted of average DME flow quantity in duct were $17.4m^3min^{-1}$ and $10.2m^3min^{-1}$ respectively to greenhouse-1 and greenhouse-2 and no DME gas was supplied to greenhouse-3 which was left as control (DME-3). DME supply times were $0.5hr\;day^{-1}$, $1hr\;day^{-1}$, $1:30hrs\;day^{-1}$ and $2hrs\;day^{-1}$ on week 1, 2, 3, and 4 respectively. Chlorophyll content and fresh and dry weight of lettuce and Chinese cabbage were measured for each treatment and analyzed through analysis of variance with a significance level of P<0.05. The result of the study showed that $CO_2$ concentration increased up to 265% and 174% and the level of temperature elevated $4.8^{\circ}C$ and $3.1^{\circ}C$ in greenhouse-1 and 2, respectively as compared to greenhouse-3 due to application of DME combustion gas. Although, the same crop management practices were provided in greenhouse-1, 2 and 3 at a same rate, the highest change (p<0.05) of chlorophyll content, fresh weight and dry weight were found from the DME-1 treatment, followed by DME-2. As a result, DME combustion gas that raised the level of temperature and $CO_2$ concentration in the greenhouse-1 and greenhouse-2, might have an effect on growth of lettuce and Chinese cabbage. At end of experiment, the highest fresh and dry weight of lettuce and Chinese cabbage were measured in greenhouse-1 and followed by greenhouse-2. Similarly chlorophyll content of greenhouse-1 and greenhouse-2 were more compared to greenhouse-3. In general, DME was not producing any harmful gas during its combustion period, therefore it can be used as an alternative to conventional fuel such as diesel and liquefied petroleum gas (LPG) for both heating and $CO_2$ supply in winter season. Moreover, endorsed quantify of DME combustion gas for a specified crop can be applied to greenhouse to improve the plant growth and enhance yield.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.90-99
• /
• 2021

In this study, to reduce the production cost of poly(3-hydroxyalkanoates) (PHA), optimal cell growth and PHA biosynthesis conditions of the isolated strain Pseudomonas sp. EML8 were established using waste frying oil (WFO) as the cheap carbon source. Gas chromatography (GC) and GC mass spectrometry analysis of the medium-chain-length PHA (mcl-PHAWFO) obtained by Pseudomonas sp. EML8 of WFO indicated that it was composed of 7.28 mol% 3-hydrxoyhexanoate, 39.04 mol% 3-hydroxyoctanoate, 37.11 mol% 3-hydroxydecanoate, and 16.58 mol% 3-hydroxvdodecanoate monomers. When Pseudomonas sp. EML8 were culture in flask, the maximum dry cell weight (DCW) and the mcl-PHAWFO yield (g/l) were showed under WFO (20 g/l), (NH4)2SO4 (0.5 g/l), pH 7, and 25℃ culture conditions. Based on this, the highest DCW, mcl-PHAWFO content, and mcl-PHAWFO yield from 3-l-jar fermentation was obtained after 48 hr. Similar results were obtained using 20 g/l of fresh frying oil (FFO) as a control carbon source. In this case, the DCW, the mcl-PHAFFO content, and the mcl-PHAFFO yields were 2.7 g/l, 62 wt%, and 1.6 g/l, respectively. Gel permeation chromatography analysis confirmed the average molecular weight of the mcl-PHAWFO and mcl-PHAFFO to be between 165-175 kDa. Thermogravimetric analysis showed decomposition temperature values of 260℃ and 274.7℃ for mcl-PHAWFO and mcl-PHAFFO, respectively. In conclusion, Pseudomonas sp. EML8 and WFO could be suggested as a new candidate and substrate for the industrial production of PHA.

• Journal of Nutrition and Health
• /
• v.53 no.6
• /
• pp.629-647
• /
• 2020

Purpose: This study was undertaken to develop a nutrition quotient for elementary school children (NQ-C) for evaluating the overall dietary quality and eating behaviors. Methods: The NQ-C was developed by implementing 3 stages: item generation, item reduction, and validation. Candidate food behavior checklist (FBC) items of the NQ-C were derived from systematic literature reviews, expert in-depth interviews, statistical analyses of the fifth Korean National Health and Nutrition Examination Survey data, and national nutrition policies and recommendations. For the pilot survey, 260 elementary school students (128 second graders and 132 fifth graders) completed self-administered questionnaires as well as 24-hour dietary intakes, with the help of their parents and survey team staff, if required. Based on the pilot survey results, expert reviews, and priorities of national nutrition policy and recommendations, checklist items were reduced from 41 to 24. A total of 20 items for NQ-C were finally selected from results generated from 1,144 nationwide samples surveyed. Construct validity of the NQ-C was assessed using the confirmatory factor analysis, LInear Structural RELations. Results: Analyses of the exploratory factors of NQ-C identified that 5 dimensions of diet (balance, diversity, moderation, practice and environment) accounted for 46.2% of the total variance. Standardized path coefficients were used as weights of the items. The NQ-C and 5-factor scores of the subjects were calculated using the obtained weights of the FBC items. Conclusion: Our data indicates that NQ-C is a useful and suitable instrument for assessing nutrition adequacy, dietary quality, and eating behaviors of Korean elementary school children.