• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.53-60
• /
• 2006

Single well injection withdrawal tracer tests with bromide were carried out at two wells developed in a horizontally heterogeneous fractured rock. The hydraulic conductivity of TW-1 well was 5 times larger than TW-2 well, and the average linear velocity of TW-2 well was 1.8 times faster than TW-1 well. The difference of hydrodynamic dispersions of two wells in the fractured rock was studied with the analysis of concentration breakthrough curves and cumulative mass recovery curves of bromide with withdrawal time, and the estimation of average travel distance, pore velocity, longitudinal dispersivity and longitudinal dispersion coefficient. The average travel distances of bromide were estimated to be 3.00 m in TW-1 well and 5.62 m in TW-2 well. The average pore velocities for the injection/withdrawal phase were estimated to be $4.31\;{\times}\;10^{-4}\;m/sec$ in TW-1 well and $8.08\;{\times}\;10^{-4}\;m/sec$ in TW-2 well. Average travel distance and pore velocity were higher in TW-2 well because of small effective porosity. Longitudinal dispersivities were estimated to be 28.73 cm in TW-1 well and 18.49 cm in TW-2 well, and bromide transport was 1.55 times faster in TW-1 well. Longitudinal dispersion coefficients were estimated to be $5.14\;{\times}\;10^{-6}\;m^2/sec$ in TW-1 well and $6.06\;{\times}\;10^{-6}\;m^2/sec$ in TW-2 well, and diffusion area was 1.18 times larger in TW-2 well.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.17-29
• /
• 2010

A container terminal productivity is maximized by a minimized time for processing containers. So, we have been elevated the container terminal productivity through an improvement of computing system, but there are a limitation because of problems for transportation management and method. A Y/T(Yard Tractor), which is a representative transportation, is able to do only one process, loading or unloading, at one time. So if the Y/T can do loading and unloading step by step at a same time, the processing time would be shortened. In this paper, we proposed an effective operating process of Y/T(Yard Tractor) Multi-Cycle System by applying RTLS(Real Time Location System) to Y/T(Yard Tractor) in order to improve the process of loading and unloading at the container terminal. For this, we described Multi-Cycle System. This system consists of a real time location of Y/T based on RTLS, an indicating of Y/T location in real time with GIS technology, and an algorithm(Dijkstra's algorithm) of the shortest distance. And we used the system in container terminal process and could improve the container terminal productivity. As the result of simulation for the proposed system in this paper, we could verify that 9% of driving distance was reduced compared with the existing rate and 19% of driving distance was reduced compared with the maximum rate. Consequently, we could find out the container performance is maximized.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.400-400
• /
• 2016

자연하천에서 다양한 목적으로 설치된 수공구조물을 볼 수 있으며 대표적으로 교량의 교각을 들 수 있다. 교각 주위에서 발생하는 국부세굴은 교량붕괴의 가장 큰 원인이므로 이에 대한 연구는 필수적이다. 수리실험 또는 수치모형을 이용하여 교각주변의 국부세굴에 관한 많은 연구들이 수행되었지만 세굴인자의 특성 및 메커니즘에 대한 연구는 여전히 부족하다. 본 연구에서는 LES(large-eddy simulation)에 유사이송 및 하상변동 모형과 결합하여 2개의 원형교각 주변의 흐름 및 세굴을 수치모의 하였다. LES와 유사이송 및 하상변동 모형의 결합은 난류의 영향을 직접 모형에 고려할 수 있기 때문에 교각 주변에서 발생하는 말굽형 와 구조와 같은 복잡한 흐름에 의한 영향이 반영된다. 계산영역은 흐름방향으로 10 m, 횡 방향으로 2.4 m로 하였고, 지름(D) 0.16 m를 가지는 원형교각을 유입부로부터 2.4 m 떨어진 위치에 배치하였다. 이때 두 개 교각사이의 각은 $0^{\circ}{\sim90^{\circ}$이고 원형교각 사이의 거리는 5D로 하였다. 수치모의에 사용된 조건은 이전의 수리실험(Khosronejad et al., 2012)을 참고하여 접근평균유속은 0.25 m/s, 수심은 0.15m를 사용하였다. 수치모의는 원형교각 주변의 최대세굴심이 평형상태에 이를 때 까지 수행하였다. 접근각도 변화에 따른 원형교각 주변의 세굴과정 및 특성을 분석하였으며 최대 세굴심 결과를 Hannah(1978)의 수리실험결과와 비교하였다.

• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.71-81
• /
• 2018

Forklifts in a shipyard lift and transport heavy objects. Tasks occur dynamically and the rate of the task occurrence changes over time. Especially, the rate of the task occurrence is high immediately after morning and afternoon business hours. The weight of objects varies according to task characteristic, and a forklift also has the workable or allowable weight limit. In this study, we propose an online forklift dispatching algorithm based on nearest-neighbor dispatching rule using minimal cost assignment approach in order to attain the efficient operations. The proposed algorithm considers various types of forklift and multiple jobs at the same time to determine the dispatch plan. We generate dummy forklifts and dummy tasks to handle unbalance in the numbers of forklifts and tasks by taking their capacity limits and weights. In addition, a method of systematic forklift selection is also devised considering the condition of the forklift. The performance indicator is the total travel distance and the average task waiting time. We validate our approach against the priority rule-based method of the previous study by discrete-event simulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.93-93
• /
• 2019

식생이 있는 개수로 흐름의 분석이 중요한 이유는 식생이 흐름 특성과 유사이송 및 하상변동에 영향을 주어 복잡한 흐름 현상을 만들어 내기 때문이다. 식생 밀도, 식생 길이, 식생이 식재된 형태에 따라 흐름의 현상이 달라지며, 흐름 특성의 변화로 인해 하상 및 주변 하천구조물에 영향을 줄 수 있다. 하천의 식생은 대부분 폭과 길이가 제한된 모습으로 존재하는 경우가 많으며, 식생이 존재하는 영역에서는 식생항력에 의해 유속이 감소하고 식생이 없는 영역에서 유속이 증가한다. 식생항력에 의해 변화된 흐름 특성은 일정 거리를 지나면 평형상태에 도달하게 되며, 식생의 경계면에서는 전단층이 발달하여 모멘텀의 교환이 활발하게 발생하는 현상을 보인다. 식생 흐름의 특성을 분석하기 위해 수치모형으로는 식생 흐름의 강한 비등방성을 모의할 수 있는 비등방성 수치모형이 적합하다. 본 연구에서는 부분 식생이 식재된 개수로에서 RSM (Reynolds stress model)을 이용하여 식생과 식생 주변의 흐름 특성 및 난류량을 분석하였다. 흐름의 변화에 따라 크게 3 구간으로 나누어 흐름 특성을 파악할 수 있으며, 식생의 밀도와 식생 영역의 폭의 길이에 따라 각 구간의 길이가 달라지는 것을 확인하였다.

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.245-254
• /
• 2006

Using a natural gradient tracer test, the characteristics of hydrodynamic dispersion according to each depth of a fractured rock were studied, and the effective porosity and longitudinal dispersivity of the fractured rock were estimated. The difference of vertical hydrodynamic dispersion was identified by concentration breakthrough curves linear regression analyses of bromide concentrations according to depths versus time, and hydraulic fracture characteristics at two intervals of the monitoring well. Higher concentration and faster arrival time at GL- 18 m depth (RQD 13%, average joint spacing 2 cm, TCR 100%) than at GL- 25 m depth (RQD 41%, average joint spacing 7 cm, TCR 100%) resulted from shorter distance and more fractures. Tracer was transported through the 1 st fractures until the arrival of its peak concentration and through the 2nd fractures or matrix diffusion after the arrival of its peak concentration. The increase/decrease slopes of bromide concentration versus time were 3.46/-1.57 at GL-18 m depth and 3.l9/-0.47 at GL- 25 m depth of the monitoring well. So the faster bromide transport was confirmed at GL- 18 m depth with more fractures. The concentration increment of bromide was fitted by a Gaussian function and the concentration decrement of bromide was fitted by an exponential function. Effective porosity and longitudinal dispersivity estimated by CATTI code were 10.50% and 0.85 m, respectively.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.863-873
• /
• 2021

The mechanical dispersion which dominates solute transport in porous media is caused by the difference in flow velocity within pores. Longitudinal dispersion coefficient and longitudinal dispersivity that are hydro-dispersive parameters of advection-dispersion equation can only be obtained by experiment. Hydraulic mean radius that represents the amount and intensity of flowing water within pores can be obtained by the formula using the factors for physical properties. A slug injection test was conducted and a power type empirical formula for obtaining a longitudinal dispersivity using a hydraulic mean radius in rockfill porous media was derived. It is possible to obtain the longitudinal dispersivity depending on transport distance because it contains a formula for a scale constant, and expected to be applicable to waterways filled with homogeneous gravel and small flow rate.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.362-367
• /
• 1998

Center Distance Finding (CDF) is a technique to find the sphere diameter by measuring the distance between two contacting spheres. The focal spots of the sphere clusters are formed in the back-focal plane by the transmission-mode optical microscope with the pseudothermal illumination source. Digital images taken by the CCD camera were processed by the software called Global Lab Image. The centers of the focal spots are found and the spot positions are expressed in terms of the CCD pixel elements, whose coordinate are calibrated by a heterodyne interferometer. The new CDF measurement system has been developed, which are more advantageous in time and convenience than the existing system, while the measurement uncertainly remains sufficient for its use as a magnification standard for optical microscopy. Two kinds of polystyrene spheres whose nominal diameters 3 and 10 $\mu\textrm{m}$ (NIST SRM 1962 and 1960) are measured with the uncertainly less than 1% at the confidence level of 99%, and the results are compared with the results of National Institute of Standards and Technology.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.94-94
• /
• 2022

본류와 지류가 만나는 하천 합류부에서 발생하는 복잡한 흐름 구조는 하상변동에 영향을 주며, 본류와 다른 특성을 보이는 지류의 유입은 수질과 수생태계에도 영향을 준다. 합류부는 하천 변화의 다양성을 보이기 때문에 하천 관리 측면에서 중요한 구간으로, 흐름 및 혼합 특성 이해가 중요하다. 합류부에서의 흐름 및 혼합은 본류와 지류의 유량비, 밀도차, 단차, 합류각, 하도형상 등의 영향으로 그 양상이 달라지며, 흐름장 및 두 수체에 의한 이송물질의 혼합이 이루어졌다고 간주하는 혼합거리는 지류가 본류에 미치는 영향 범위 분석을 위한 중요한 매개변수이다. 본 연구에서는 합류부 흐름에 미치는 주요 인자 중 유량비와 밀도차가 합류부 흐름 및 혼합에 미치는 영향을 수치해석을 통해 분석하고, 조건의 변화에 따른 혼합거리를 예측해 보고자 한다. 본 연구의 대상 지역인 낙동강-황강 합류부는 다기능보와 댐의 운영에 따라 유입 유량 및 유량비가 조절되며, 여름철에는 황강의 수온이 낙동강보다 평균 4℃ 이상 낮으며, 9℃(지류 20℃; 본류 29℃) 이상의 수온차가 발생하기도 한다. 이 경우 밀도비는 0.998로 밀도류가 발생할 수 있는데, 밀도류가 발생할 경우 수표면과 저층이 분리되어 흐르기 때문에 동일 유량 조건에서도 혼합 양상은 달라진다. 밀도류가 발생하기 위해서는 수표면과 저층이 분리되는 성층이 발달해야 하는데, 이는 유속 또는 유량의 범위에 따라 성층의 발달 여부가 달라질 수 있다. 이러한 현장 조건을 반영한 수치해석을 통해 다양한 유량 조건(유량비)에서 밀도의 차이(수온차)가 합류부의 흐름 및 혼합에 미치는 영향을 분석해 보고자 하며, 합류부에서 밀도차에 의한 흐름의 변화 조건을 무차원수(Richardson number, Densimetric Froude number 등)를 통해 정량화해보고자 한다. 이는 지류가 본류에 미치는 영향의 정도와 범위를 파악함으로써 하천 관리를 위한 관측망 및 현장 조사의 범위 선정의 기초자료 마련뿐 아니라 본류의 수온 변화가 발생할 수 있는 범위의 파악을 통해 수생태계에 미치는 영향 파악을 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.374-380
• /
• 2017

In this study, we analyzed the situation of the 119 emergency medical service zone of H town, countryside of Y city from January 1st, 2015 to December 31st, 2016 and then, on the basis of this analysis, we investigated the present condition of the patient-transportation service of the 119 emergency medical service to provide the basic data in order for patients to use the emergency medical service more efficiently. We analyzed the data with SPSS 21.0 using frequency analysis and, after positioning the virtual 119 emergency medical service, we analyzed the data of the transportation time and transportation distance by using GIS. The results of this study show that the use of the 119 emergency medical service for people over 65 years old represents approximately 57% of the total number of patients transported, The average distance and time of the real moving reaction are 6.41 km and 11.86 min, respectively. The distance and time from the pick-up location to the hospital are 18.24 km and 21.52 min, respectively. Given the present position of the 119 emergency medical service, the results of this analysis using GPS show that the (average) distance and time from the 119 emergency medical service to Jang * Ri town are 9.12 km and 12 min, and the (average) total distance and time to arrive at the hospital after the emergency medical service picks up the patient are 36.83 km and 62 min, respectively. In the case of the virtual emergency medical service, the total distance and time required to arrive at the hospital after the emergency medical service picks up the patient are 27.71km and 50min, respectively. The results of this study showed that the present position of the 119 emergency service does not provide the optimum distance and time from the patient's location to the hospital. Therefore, we consider that the repositioning of the 119 emergency medical center is necessary, in order to reduce the time required for the emergency medical service to move to the patient's location and then bring the patient to the hospital.