• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1113-1120
• /
• 2013

A numerical analysis of the effect of the position of a circular cylinder in a $45^{\circ}$ tilted enclosure on natural convection in the enclosure is presented. The location of the cylinder is changed between -0.4 and 0.4. The Rayleigh number is varied between $10^3$ and $10^5$. The effect of the location of the cylinder on natural convection in the enclosure is analyzed by the isothermal line, stream line, and surface-averaged Nusselt number. The flow and heat transfer characteristics are independent of time in the range of the Rayleigh number and cylinder location that is considered in this study. The surface-averaged Nusselt number of the cylinder and enclosure increases as the cylinder gets closer to the wall of the enclosure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.3
• /
• pp.229-236
• /
• 2001

One of the basic tasks in hydrological analysis is to delineate drainage basins and channel networks. Characteristics of channel networks and drainage basin parameters have been used widely in hydrologic calculation and modeling. DEMs(Digital Elevation Models) are generally used to automatically map the channel networks and to delineate drainage basins. This paper presents an effort to analyze basin characteristics using various DEMs. The quantitative analysis of channel networks begins with Horton's method of classifying stream according to Horton orders in hydro-geomorphy. HGSIS(Hydro-Geo-Spatial Information System) is possible to extract parameters. Usually, hydrologists. surveyors and GSIS researchers have some difficulties in accessing satellite images and in extracting DEMs from them. Therefore, the extracted DEMs from contours of digital map is widely used to have the basic works of hydrological analysis. This study presents proper DEMs to calculate Horton's orders, width function, drainage area, main channel length, total channel length, basin elevation and basin slope at digital map of 1:25,000 scale.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.527-536
• /
• 2014

In this paper, the 50kW aerogenerator which is applicable to the microgrid was designed and analyzed by using commercial simulation program Maxwell 2D. Particularly, the suggested PMSG to reduce the cogging torque introduced the offset and skew concept. The suggested optimal value of offset and skew was decided by 2mm and 60 degree of electric angle. The simulation results of the PMSG when load operation condition showed the average harmonic distortion 1.3%, voltage 322.41V, current 94.95A, and iron loss 9.73W, eddy current loss 73.68W, copper loss 3.52kW. The capacity of aerogenerator calculated 61.56kW, and the suggested design process can be applied to higher capacity generator.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.107-115
• /
• 1995

A simple estimation system of ultimate and residual strength for ship structures is developed on the Open-Window system of SUN4 engineering workstation. System development consists of three stages. Firstly, various ultimate longitudinal strength estimation methods are investigated and some rational estimation methods are adopted based on the parametric comparison of various hulls or box girders. Secondly, these selected and newly formulated methods are linked with elastic & perfectly plastic section modulus calculation procedure. Therefore, the longitudinal hull girder strength can be calculated in the intact and damaged conditions due to the grounding or collision of hull structure. Finally, an exclusive system is developed such that whole procedures are proceeded under the window management system using mouse button and elastic and perfect plastic stress conditions. Also longitudinal members are plotted automatically under three dimensional graphic circumstances. These established program is tested for various actual ships, and some examples are illustrated.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.2
• /
• pp.153-163
• /
• 2017

The Naeyeonsan Tuff is a stratigraphic unit which is distinguished as a cooling unit in the volcanic rocks of the northern Pohang. The Naeyeonsan Tuff, which is composed of crystals of plagioclase, quartz and hornblende, glasses of pumice and shard, and lithics of dacite, rhyolite, sandstone and shale, belongs to a lapilli tuff field according to the granulometric classification and to a vitric tuff field according to the constituent classification. The tuffs mostly develop welding foliations by dense welding and flatterning pumices and shards, and show several flow indicators by pyroclastic flowing. We can know a movement pattern from flow lineations and imbrications by pumices and lithics, and lateral gradings in isopleth map by average largest lithics and pumices in the Naeyeonsan Tuff, which indicate that the Naeyeonsan Tuff had a possible source area from the southeastern part.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.27-37
• /
• 1995

A performance index is very important and indispensable to the evaluation of automatic steering system of ships in open sea from the viewpoint of energy saving. In this paper, we derive the performance index of automatic steering system from the concept of energy loss of propulsive power. The index is found to consist of three terms, energy loss due to elongation of sailing distance, energy loss due to steering, and energy loss due to yawing motion. We also provide two kinds of calculation method on the performance index ; frequency response analysis and digital simulation. The numerical calculations are carried out for an ore carrier and a fishing boat by both methods. The frequency response analysis is found to be useful if the system is linear and the disturbance on ship is not large. If the system is nonlinear or the disturbance is excessive, the method of digital simulation has to be applied for the accurate evaluation of the performance index. Further investigations into the effects of nonlinear elements such as weather adjuster, power unit etc. on the performance index, will be dealt with in another paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.78-85
• /
• 2020

The scaffolding system, which is a construction workbench of the cargo containment for a membrane LNG carrier, is a large truss structure composed of various members. To shorten the installation period and process of the scaffolding system, it is effective to enlarge the mounting unit from the existing two stages to eight stages. Owing to the increase in lifting load according to the large size of the module, the stresses around the pin and hole will be increased significantly. In this study, a tensile strength test and contact stress analysis were performed to confirm the structural safety. The relatively large hole deformation was observed visually near the average load generated in the vertical pipe at the top through tensile strength tests. A contact stress calculation confirmed the stress distribution around the hole. The contact problem was dealt with in terms of the Herzian contact stress. The possibility of 8-stage loading was examined by comparing the yield strength and contact stresses of failure critical locations. As a result, the 8-stage loading method of the existing scaffolding material was inadequate, and a new loading method with proper safety is proposed.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.207-207
• /
• 2011

본 연구에서는 유역 특성의 판단에 적절한 호우사상을 선별하여 사용하는 것이 어느 정도 효과적인지를 평가하였다. 토양의 습윤 정도에 따른 유역의 특성을 반영하기 위해 AMC 조건을 고려하였으며, 유역의 집중시간 및 저류상수의 추정방법으로는 Nash 모형의 구조를 이용하는 방법을 적용하였다. 아울러 강우의 공간변동 정도를 파악하기 위해 변동계수를 이용하여 평가하였으며, 추정된 매개변수들의 대푯값 및 가능범위를 도시적으로 결정하였다. 이를 유역면적이 큰 충주댐 유역의 영춘 지점과 상대적으로 작은 평창강 방림 지점을 대상유역으로 선정하여, 다양한 호우사상에 대한 분석이 유역의 규모에 대비되어 수행될 수 있도록 하였다. 그 결과를 정리하면 다음과 같다. 강우의 공간변동 정도를 변동계수로 평가한 결과 AMC-III 조건에서 강우강도의 공간적 변동폭이 작음을 확인하였다. 따라서 AMC-III 조건에서 유도한 유출특성이 단위도의 이론에 부합하는 것으로 판단된다. 아울러 AMC 조건에 따라 추정된 집중시간과 저류상수는 AMC-I보다 AMC-III 경우에서 상대적으로 변동폭도 작았으며, 선형저수지의 특성 역시 일관됨을 확인하였다. 특히, AMC-I 조건의 경우는 선행강우가 없는 상태에서의 호우사상들로서 일단 그 크기가 작을 가능성이 크다는 문제점을 가지고 있다. 따라서 AMC-I 조건의 호우사상 보다는 AMC-III 조건의 호우사상을 이용하는 게 보다 홍수 유출 해석에 유리하다고 판단된다. 추정된 매개변수의 대푯값과 그의 가능범위 결정에 앞서, AMC-III 조건에서 추정된 매개변수들이 군집해 있는 구간을 설정한 후, 이를 벗어나는 매개변수를 제외하였다. 다음으로 매개변수의 무게중심 즉, 평균을 중점으로 하여 사분위수(25%, 50%, 75%)에 해당되는 매개변수 개수가 선택되도록 사변형을 작성하였다. 이 때 집중시간과 저류상수 사이의 상관성을 고려하기 위해 사변형은 선형저수지 개수의 선과 선형저수지의 저류상수의 선이 만나는 점을 연결하여 작성하였다. 영춘 지점의 경우, 집중시간의 대푯값은 20.6 hr, 저류상수의 대푯값은 18.4 hr, 방림 지점은 각각 7.5 hr, 8.2 hr이다. 매개변수의 대푯값 가능범위는 충주댐 영춘 지점의 경우 1사분에서 집중시간 18-25 hr, 저류 상수는 17-20 hr 정도, 방림 지점의 경우 집중시간은 5-10 hr, 저류상수는 7-11 hr 정도이다. 아울러 추정된 대푯값의 가능 범위를 이용하여 기존의 경험공식을 평가하였다. 그 결과 집중시간의 경우 Kraven 공식, 정성원 공식이, 저류상수의 경우 Sabol 공식, 정성원 공식, 윤태훈 공식이 대푯값의 범위에 속하는 것으로 분석되었다. 그러나 분석 지점의 부족으로 기존의 경험공식의 정량적 평가는 어렵다. 추후에 보다 많은 지점을 대상으로 분석한다면 보다 설득력이 있는 경험공식의 평가와 다양한 유역에 적합한 경험공식의 산정도 가능할 것이다.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.186-197
• /
• 2022

The Daejanggakgibi Stele of Silleuksa Temple in Yeoju is a stone stele from the Goryeo Dynasty that is inscribed with various stories about the construction of Daejanggak, a place where Buddhist scriptures were kept. This stele has been maintained for a long time in a state in which discoloration of the body has occurred, and the inscription has been partially damaged due to dozens of cracks. Using non-destructive analysis methods for stone artifacts, material investigation, portable X-ray fluorescence analysis, and ultrasonic velocity analysis for the stele were performed. It was confirmed that the stele body was composed of light gray crystalline limestone, and the base stone, support stone, and cover stone were medium-grained biotite granite. Portable X-ray fluorescence analysis confirmed that iron(Fe) was an original coloring element of the stele surface. From the distribution pattern of the coloration, it can be inferred that iron-containing materials flew down from between the stele body and the cover stone. Thereafter, living organisms or organic contaminants attached to it so that yellow and black contaminants were formed. Ultrasonic diagnosis revealed that the physical property of both the front and back surfaces ranged from fresh rocks(FR) to completely weathered rocks(CW), and the average weathering index was grade 3(intermediate). However, the point where cracks developed intensively was judged to be the completely weathered stage(CW), and some cracks located in the upper and lower parts of the stele bear potentially very high risk. It is necessary to monitor the movement of these cracks and establish reinforcement measures for conservation in the future.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.1
• /
• pp.10-21
• /
• 2009

Muan Bay has extensively undertaken artificial influences through a series of construction of dams and dykes nearby resulting in a substantial increase in highest high water level. To unravel sedimentary responses to the water level rise, we collected a number of surface sediment samples and hydrodynamic data from in-situ observations of tidal currents in Muan Bay in 1998 and 2007. Comparison of the data between 1998 and 2007 shows that the relative content of coarse fractions, sand and gravel, in the sediment samples has increased with a decreased mean size, on average, from 6.2 to 5.8${\phi}$ at the expense of silt contents. Such a coarsening trend, which is more evident around high water level, particularly on the tidal flats of Dongam-ri, Guro-ri and Aphae-do, is most likely attributable to rising water level. On the other hand, an increase of fine fractions locally in the western entrance of the bay can be explained with changes in characteristics of tidal currents imposed by construction of bridges therein, such as decreased velocities and varied direction and phase of the tidal currents.