• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.647-654
• /
• 2010

In this study, an efficient ornithopter aerodynamic model, which is applicable to ornithopter wing design considering fluid-structure interaction or ornithopter flight dynamics and control simulation, was proposed and experimentally validated through the wind tunnel experiments. Due to the ornithopter aerodynamics governed by unsteady low Reynolds number flow, an experimental device was specially designed and developed. A part of the experimental device, 2-axis loadcell, was situated in the non-inertial frame; the dynamic calibration method was established to compensate the inertial load for pure aerodynamic load measurements. The characteristics of proposed aerodynamic model were compared with the experimental data in terms of mean and root-mean-square values of lift and drag coefficients with respect to the flow speed, flapping frequency, and fixed angle of attack.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.45-52
• /
• 2002

This paper proposes the fuzzy closed RCMP queueing network model using fuzzy set theory for the performance evaluation of centralized distributed processing system with ambiguous system factors in the network environments. This model can derive the measures for system performances such as the job spending time, the system throughput, average job number and server utilizations using fuzzy mean value analysis which can process the fuzzy factors. Computer simulation has been performed centralized distributed system with fuzzy service requirement time for verifying the effectiveness of derived equations of performance evaluation according to the numbers of clients, and the results were analyzed. The proposed model provides more and flexible realistic than performance evaluation of conventional method when we evaluated system performance with ambiguous factors.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.216-223
• /
• 2019

The objective of this study is to propose a reliable stress-strain model in compression for lightweight concrete using bottom ash aggregates and air foam(LWC-BF). The slopes of the ascending and descending branches in the fundamental equation form generalized by Yang et al. were determined from the regression analyses of different data sets(including the modulus of elasticity and strains at the peak stress and 50% peak stress at the post-peak performance) obtained from 9 LWC-BF mixtures. The proposed model exhibits a good agreement with test results, revealing that the initial slope decreases whereas the decreasing rate in the stress at the descending branch increases with the increase in foam content. The mean and standard deviation of the normalized root-square mean errors calculated from the comparisons of experimental and predicted stress-strain curves are 0.19 and 0.08, respectively, for the proposed model, which indicates significant lower values when compared with those(1.23 and 0.47, respectively) calculated using fib 2010 model.

• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.61-73
• /
• 2012

This paper proposes a histogram specification based image enhancement method, which uses the brightness mean and variance of an image to maximize the entropy of the image. In our histogram specification step, the Gaussian distribution is used to fit the input histogram as well as produce the target histogram. Specifically, the input histogram is fitted with the Gaussian distribution whose mean and variance are equal to the brightness mean(${\mu}$) and variance(${\sigma}2$) of the input image, respectively; and the target Gaussian distribution also has the mean of the value ${\mu}$, but takes as the variance the value which is determined such that the output image has the maximum entropy. Experimental results show that compared to the existing methods, the proposed method preserves the mean brightness well and generates more natural looking images.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.5
• /
• pp.147-156
• /
• 2013

Each field of modern society, industrialization and the development of science and technology are rapidly changing. However, as a side effect of rapid social change has caused various problems. Crime of the side effects of rapid social change is a big problem. In this paper, a model for predicting crime and Markov chains applied to the crime, predictive modeling is proposed. Markov chain modeling of the existing one with the overall status of the case determined the probability of predicting the future, but this paper predict the events to increase the probability of occurrence probability of the prediction and the recent state of the entire state was divided by the probability of the prediction. And the whole state and the probability of the prediction and the recent state by applying the average of the prediction probability and the probability of the prediction model were implemented. Data was applied to the incidence of crime. As a result, the entire state applies only when the probability of the prediction than the entire state and the last state is calculated by dividing the probability value. And that means when applied to predict the probability, close to the crime was concluded that prediction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.106.2-106.2
• /
• 2013

본 논문은 반도체 및 평판 디스플레이 생산공정에서 가동되고 있는 건식 진공펌프들의 정밀 상태진단 및 예지 보수를 위한 pump monitoring system (PMS)의 제품화에 필요한 프로그램의 개발 내용을 소개한다. 본 연구에서 소개하는 건식 진공펌프들의 정밀 상태진단 및 예지보수기법은 PCT 특허 2 건으로 이미 등록된 내용이며, 본 논문은 이들 기법의 실제 구현에서 직면하는 기술적 문제점과 극복 방안을 제시한다. 본 논문에서는 현재 반도체 공정에 사용되고 있는 건식 진공펌프들로부터 측정하는 다중 상태변수들의 조사 결과를 소개한다. 이들 상태변수 측정치들이 갖는 개략적 특성을 통계적 분포함수로 분석한 결과를 우선 보인다. 특히 펌프 구동모터들의 소비 전류신호는 두 평균값에 대한 분포 즉 두 종의 분포함수를, 그리고 온도, purge gas 유량, 배기구 압력 등은 정상적 평균값에 대한 한나의 분포를 보였다. 따라서 구동모터들의 소비전류의 분포 즉 두 상하 수준('low and high' current level)에 따라 batch data를 구분하는 방법의 개발이 필요하였다. 본 연구에서는 step 함수형 eigenvector를 적용하여 소비전류 신호의 상하수준 천이 영역과 방향을 동시에 인식할 수 있는 기법을 개발 적용하였으며, 3300회의 배출가스 부하에 변화에 대한 천이 영역과 방향을 인식에 하나의 실패도 보이지 않음을 확인하였다. 기존의 측정 상태변수에는 회전기계류의 정밀 상태진단 및 예지보수에 핵심적인 기계진동 측정용 진동센서를 포함하고 있지 않은 기술적 문제점이 발견되었다. 기존 진동센서들의 높은 가격 뿐 아니라 진동센서의 출력신호를 저/중/고역 주파수 대역의 실효치로 환산하는 기술적 한계 때문에 진공펌프 상태진단에 아직 사용하고 있지 않고 있다. 본 연구에서는 진동선서 비용의 저감화 방안뿐 아니라 로터 회전 대역(250Hz 이하 저주파 영역), 베어링 진동 대역(250 Hz~2.5 kHz의 중간 주파수 영역), 그리고 기어 진동 대역(2.5 kHz~10 kHz 주파수 영역)별 실효치를 실 시간 측정할 수 있는 진동측정 모듈의 제품화 모델을 개발하였다. 개발 제품의 성능 뿐 아니라 현장 시험결과를 소개한다. 마지막으로 본 연구팀이 개발한 PCT 특허 2 건에 포함된 건식 진공펌프들의 정밀 상태진단 및 예지보수기법에 대한 현장 시험결과를 간략히 소개한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.445-445
• /
• 2022

최근 새만금 방조제 건설이 완료됨에 따라 주변 연안지역의 지형에 많은 변화가 감지되었다. 본 연구대상지는 격포해수욕장으로서 새만금 사업 준공 후 연안침식에 따른 모래 유실 등으로 인해 양빈사업 등이 검토되고 있는 상황이다. 본 연구에서는 연안지형 변화 탐지를 위한 UAV (Unmanned Aerial Vehicle) 활용기술을 제시하는 것으로서 총 3회에 걸쳐 UAV 영상을 촬영하였다. 영상촬영은 DJI Inspire 2 UAV를 활용하였으며 VRS(Virtual Reference Service) 측량성과와 연계하여 Pix4D Mapper SW를 통해 정사영상과 수치표면모델(DSM; Digital Surface Model)을 제작하였다. 먼저 2018. 6. 29 ~ 2018. 12. 10 사이의 지형변화 탐지를 수행한 결과 침식과 퇴적의 최대값은 각각 2.56m와 2.24m로 나타났으며 평균적으로는 0.01m의 퇴적이 발생하였다. 그리고 2018. 6. 29 ~ 2019. 6. 14 동안의 침식과 퇴적의 최대값은 각각 2.31m와 2.28m로 나타났으며 평균값은 0.02m의 침식이 발생하였다. 또한 2018. 12. 10 ~ 2019. 6. 14 사이에는 침식과 퇴적의 최대값이 각각 2.28m와 2.55m로 나타났으며 평균값은 0.03m의 침식이 발생하였다. 지형변화를 보다 상세히 모니터링하고자 퇴적과 침식구간을 나누어 분석을 수행한 결과, 2018. 6. 29 ~ 2018. 12. 10 사이에는 0.5m 이내의 침식과 퇴적구간 면적이 각각 13,324.4m²와 14,667.3m²로 퇴적구간의 면적이 1,342.9m² 만큼 높게 나타났으며, 2018. 12. 10 ~ 2019. 6. 14 사이에는 0.5m 이내의 침식과 퇴적구간 면적이 각각 16,176.6m²와 11,723.0m²로 침식구간의 면적이 4,453m² 만큼 높게 나타났다. 또한 2018. 12. 10 ~ 2019. 6. 14 사이에는 0.5m 이내의 침식과 퇴적구간 면적이 각각 16,821.6m²와 11,126.4m²로 침식구간의 면적이 5,695.2m² 만큼 크게 분석되었다. 이와 같이 UAV 영상 기반의 연안지형 모니터링을 수행할 경우 시계열 지형변화를 효과적으로 모니터링할 수 있으며, 이러한 업무는 새만금 방조제 건설에 따른 지형변화의 영향평가 등 다양한 연안업무에 활용될 수 있을 것이다.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.135-140
• /
• 2004

Wear mechanisms may be briefly classified by mechanical, chemical and thermal wear. A plane strain finite element method is used with a new material stress and temperature fields to simulate orthogonal machining with continuous chip formation. Deformation of the workpiece material is healed as elastic-viscoplastic with isotropic strain hardening and the numerical solution accounts for coupling between plastic deformation and the temperature field, including treatment of temperature-dependent material properties. Effect of the uncertainty in the constitutive model on the distributions of strait stress and temperature around the shear zone are presented, and the model is validated by comparing average values of the predicted stress, strain, and temperature at the shear zone with experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.23-30
• /
• 2010

A detailed circuit level model requires a small sampling time to represent high frequency switching behaviors with proper resolution. The small sampling time leads a large execution time to obtain the system analysis results. As the alternative of the detailed circuit model, an averaged PWM switch model was proposed for the rapid system level analysis. There exists a voltage distortion between the reference and output voltage because of non-ideal switching characteristics, such as the dead-time, diode forward voltage drop and conduction resistance. This paper analyzed causes and effects of the voltage distortion. The average inverter model, which reflecting this voltage distortion, is developed for the rapid and accurate analysis of automotive electric drive system in MATLAB/Simulink environment. The rapidity and accuracy of the proposed inverter model is proved through comparison between simulation and experiment.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3045-3051
• /
• 1997

Generally, multi-criteria decisions are made by group of people because of their complexity. In the existing fuzzy aggregation method, the operators using minimum, maximum and average are used to aggregate the viewpoints of many staffs. These methods have problems in that they do not reflect the decision situation in the decision process. In order to solve these problems we propose a new fuzzy multi-criteria decision support systems model that aids the decision maker to aggregate the viewpoints of many staffs according to the decision situation. Moreover, we design the algorithms which can be used in the fuzzy multi-criteria decision support systems and develop its prototying system.