• Journal of agricultural medicine and community health
• /
• v.29 no.1
• /
• pp.65-75
• /
• 2004

Objectives: Immunizations have been one of the most effective measures preventing from infectious diseases. It is quite important national infectious disease prevention policy to keep the immunizations rate high and monitor the immunizations rate continuously. To do this, Korean CDC introduced the National Immunization Registry Program(NIRP) which has been implementing since 2000 at the Public Health Centers(PHC). The National Immunization Registry Program will be near completed after sharing, connecting and transfering vaccination data between public and private sector. The aims of this study was to evaluate the immunization module of non-chart system in private clinic with health information system of public health center(made by POSDATA Co., LTD) and immunization registry program(made by BIT Computer Co., LTD). Methods: The analysis and survey were done by specialists in medical, health field, and health information fields from 2001. November to 2002. January. We made the analysis and recommendation about the immunization module of non-chart system in private clinic. Results and Conclusions: To make improvement on immunization module, the system will be revised on various function like receipt and registration, preliminary medical examination, reference and inquiry, registration of vaccine, print-out various sheet, function of transfer vaccination data, issue function of vaccination certification, function of reminder and recall, function of statistical calculation, and management of vaccine stock. There are needs of an accurate assessment of current immunization module on each private non-chart system. And further studies will be necessary to make it an accurate system under changing health policy related national immunization program. We hope that the result of this study may contribute to establish the National Immunization Registry Program.

• Korean Journal of Human Ecology
• /
• v.14 no.2
• /
• pp.313-319
• /
• 2005

This survey was conducted in order to obtain the basic data for desirable consumption habits through investigation and analysis of university students' fast food consumption behaviors. Questionnaires were collected from a total of 374 male and female students living in big or small and medium-sized cities in August, 2004. The contents surveyed were utilization and expenses of fast foods, choice of fast foods, relationship between fast foods and a diet, and characteristics of fast food restaurants. The results obtained are summarized as follows: 1. The ratio of the surveyees varied according to gender, residence, and the size of a city they're living in. For example, males took up 48.66% of the surveyees, while females did 51.34%. The ratio of residents in apartments and stand-alone houses was 54.81% and 45.19% each. 47.33% of the respondents were living in big cities, while 52.67% of them in small and medium-sized cities. 2. 70.1% of the surveyees responded that they are with friends when having fast foods. There was a highly significant difference between male and female in the type of eating companions (p<0.001). The average number of days that they eat fast foods was 1 to 2 times a week, which accounted for 63.7% of the respondents. However, in the case of eating foods, there was no significant differences between two sexes. 3. 64.2% of the surveyees paid more than 20,000 won to buy fast foods for a week, which showed no significant differences between genders. They tend to split a bill, rather than one person pays all. There was a highly significant difference between genders in paying method (p<0.001). 4. 52.1 % of the respondents chose a menu themselves. Their most favored food was chickens (26.5%), which showed a statistically significant difference between genders (p<0.001). 46.8% of them preferred coke as a drink, which had no significant difference between genders. 42.2% of the surveyees had fast foods between lunch and dinner, which also had no significant difference between genders. The most important factor in choosing a menu was its taste (62.8%), which indicated a significant difference between males and females (p<0.05). 5. The preference to fast foods was due to the influence of western culture (36.4%) and eating-out habits (29.1%), which was significantly different between genders (p<0.05). Those who eat fast foods answered they have normal weight and normal body type (49.5%). 24.3% of them were relatively fat with significant difference between genders (p<0.05). 63.4% of the surveyees thought themselves not picky with foods, and there was a significant difference between genders (p<0.05). 78.3% of them mostly preferred franchise restaurants because they are convenient and cheap.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.183-203
• /
• 2018

News articles are the most suitable medium for examining the events occurring at home and abroad. Especially, as the development of information and communication technology has brought various kinds of online news media, the news about the events occurring in society has increased greatly. So automatically summarizing key events from massive amounts of news data will help users to look at many of the events at a glance. In addition, if we build and provide an event network based on the relevance of events, it will be able to greatly help the reader in understanding the current events. In this study, we propose a method for extracting event networks from large news text data. To this end, we first collected Korean political and social articles from March 2016 to March 2017, and integrated the synonyms by leaving only meaningful words through preprocessing using NPMI and Word2Vec. Latent Dirichlet allocation (LDA) topic modeling was used to calculate the subject distribution by date and to find the peak of the subject distribution and to detect the event. A total of 32 topics were extracted from the topic modeling, and the point of occurrence of the event was deduced by looking at the point at which each subject distribution surged. As a result, a total of 85 events were detected, but the final 16 events were filtered and presented using the Gaussian smoothing technique. We also calculated the relevance score between events detected to construct the event network. Using the cosine coefficient between the co-occurred events, we calculated the relevance between the events and connected the events to construct the event network. Finally, we set up the event network by setting each event to each vertex and the relevance score between events to the vertices connecting the vertices. The event network constructed in our methods helped us to sort out major events in the political and social fields in Korea that occurred in the last one year in chronological order and at the same time identify which events are related to certain events. Our approach differs from existing event detection methods in that LDA topic modeling makes it possible to easily analyze large amounts of data and to identify the relevance of events that were difficult to detect in existing event detection. We applied various text mining techniques and Word2vec technique in the text preprocessing to improve the accuracy of the extraction of proper nouns and synthetic nouns, which have been difficult in analyzing existing Korean texts, can be found. In this study, the detection and network configuration techniques of the event have the following advantages in practical application. First, LDA topic modeling, which is unsupervised learning, can easily analyze subject and topic words and distribution from huge amount of data. Also, by using the date information of the collected news articles, it is possible to express the distribution by topic in a time series. Second, we can find out the connection of events in the form of present and summarized form by calculating relevance score and constructing event network by using simultaneous occurrence of topics that are difficult to grasp in existing event detection. It can be seen from the fact that the inter-event relevance-based event network proposed in this study was actually constructed in order of occurrence time. It is also possible to identify what happened as a starting point for a series of events through the event network. The limitation of this study is that the characteristics of LDA topic modeling have different results according to the initial parameters and the number of subjects, and the subject and event name of the analysis result should be given by the subjective judgment of the researcher. Also, since each topic is assumed to be exclusive and independent, it does not take into account the relevance between themes. Subsequent studies need to calculate the relevance between events that are not covered in this study or those that belong to the same subject.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.425-430
• /
• 2014

Foods contain various nutrients such as carbohydrates, protein, oil, vitamins, and minerals. Among them, carbohydrates, protein, and oil are the main constituents of foods. Usually, these constituents are analyzed by the Kjeldahl and Soxhlet method and so on. However, these analytical methods are complex, costly, and time-consuming. Thus, this study aimed to rapidly and effectively analyze carbohydrate, protein, and oil contents with near-infrared reflectance spectroscopy (NIRS). A total of 517 food samples were measured within the wavelength range of 400 to 2,500 nm. Exactly 412 food calibration samples and 162 validation samples were used for NIRS equation development and validation, respectively. In the NIRS equation of carbohydrates, the most accurate equation was obtained under 1, 4, 5, 1 (1st derivative, 4 nm gap, 5 points smoothing, and 1 point second smoothing) math treatment conditions using the weighted MSC (multiplicative scatter correction) scatter correction method with MPLS (modified partial least square) regression. In the case of protein and oil, the best equation were obtained under 2, 5, 5, 3 and 1, 1, 1, 1 conditions, respectively, using standard MSC and standard normal variate only scatter correction methods with MPLS regression. Calibrations of these NIRS equations showed a very high coefficient of determination in calibration ($R^2$: carbohydrates, 0.971; protein, 0.974; oil, 0.937) and low standard error of calibration (carbohydrates, 4.066; protein, 1.080; oil, 1.890). Optimal equation conditions were applied to a validation set of 162 samples. Validation results of these NIRS equations showed a very high coefficient of determination in prediction ($r^2$: carbohydrates, 0.987; protein, 0.970; oil, 0.947) and low standard error of prediction (carbohydrates, 2.515; protein, 1.144; oil, 1.370). Therefore, these NIRS equations can be applicable for determination of carbohydrates, proteins, and oil contents in various foods.

• Journal of Nutrition and Health
• /
• v.47 no.6
• /
• pp.463-474
• /
• 2014

Purpose: The aim of this study was to assess the food environment, particularly focusing on restaurants in three areas (Suwon city, Hwaseong Byeongieom-dong, and Bibong-myun). Methods: A total of 662 persons were surveyed on customers' perceptions of the food environment in restaurants. A structured questionnaire composed of 30 questions on 7 factors, sanitation (4 items), displaying information (5), food quality (12), information on nutritional and healthy food choice (6), restaurant's accessibility (1), availability (1), and affordability (1) was used. In addition, an expert assessment of restaurant sanitation, and information on nutritional healthy food choice was conducted through visiting 126 restaurants. Results: Scores (range of score : 1~7) for each factors assessing the restaurant food environment were 5.06 for sanitation factors, 5.05 for displaying information factors, 5.13 for taste appearance factors, and 4.35 for healthy menu factors. Informations on nutritional healthy food choice showed a low rate: only 16.24% of the subjects answered that there is a message encouraging choice of healthy foods and 27.4% answered that menus contain nutritional information. Significant differences in food environment were observed by region (city, town, rural). The restaurants food environment in the rural area turned out to be poorer than that of the other two areas. In comparison of customer perception and expert assessment, significant differences were observed for 'Employee appearances and uniforms are clean and tidy' (p < .05), and 'There is a message encouraging the choice of healthy foods' (p < .05). Conclusion: This study provided evidence for differences of restaurant food environment by regions. In the rural area, there is a problem in restaurant's accessibility, availability, and affordability because of a lack of variety in menu items and restaurants. This results suggest that there is a need for more healthy food restaurants in the rural area.

• Journal of Nutrition and Health
• /
• v.46 no.4
• /
• pp.346-356
• /
• 2013

This study investigated the daily physical activity level, energy expenditure, energy balance, and body composition and their relationship with university students. The participants were 130 male students ($19.5{\pm}0.5$ yrs) and 139 female students ($19.5{\pm}0.3$ yrs) at a university in Chungnam province. Physical activity level was evaluated by an equation based on 24 hr-activity record and dietary nutrient intake was evaluated using the food record method during a three-day period consisting of two week days and one weekend. Body composition was measured using Inbody 430 (Biospace Co., Cheonan, Korea). As a result, mean body mass index (BMI) of subjects indicated that they had normal weight, however mean body fat ratio was $19.1{\pm}5.4%$ for males and $28.4{\pm}5.0%$ for females, indicating that they had higher than normal weight. Daily mean physical activity level was 1.55 for males and 1.47 for females, which was regarded as 'low active', respectively. Females had more light activity than males (p<0.01). Daily mean energy expenditure was $2,803.5{\pm}788.9$ kcal/d for males and $1,915.4{\pm}510.2$ kcal/d for females (p<0.001). Daily mean dietary energy intake was $2,327.0{\pm}562.5$ kcal/d for males and $1,802.1{\pm}523.6/d$ for females (p<0.001), and daily mean energy balance was $-476.5{\pm}955.9$ kcal/d for males and $-113.3{\pm}728.1$ kcal/d for females (p<0.01). Daily mean dietary intake of protein, vitamins, and minerals, except Ca, satisfied recommended nutrient intake. Daily energy expenditure was positively related to body weight (p<0.01), BMI (p<0.01), and fat free mass ratio (p<0.05), but was negatively related to body fat ratio (p<0.01). In conclusion, subjects had a negative energy balance and low physical activity. They had a normal weight by BMI but had a more fat than normal weight by body fat ratio. This appears to be related to their low physical activity. Thus, nutrition education should be provided for university students in order to increase their physical activity for maintenance of normal weight by body composition and health promotion.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.876-885
• /
• 2017

This study aimed to identify the characteristics of Home Meal Replacement (HMR) product purchases and the need for HMR product development for Hong Kong consumers in order to suggest market segmentation strategies according to consumers' dietary lifestyle. For this, an online survey was conducted on a panel of 521 Hong Kong consumers with HMR purchase experience registered at a specialized organization. Data analysis was performed using SPSS (ver. 23.0). HMR purchase characteristics of Hong Kong consumers according to dietary lifestyle showed significant differences in all items, including 'number of purchases', 'purchase location', 'cost of single purchase', and 'reason for purchase'. According to dietary lifestyle, participants were divided into three clusters: 'High interest', 'normal interest', and 'low interest'. In the case of 'high interest in dietary life group', 'low-sodium food' was the most common, followed by 'heating food', 'low sugar food', and 'low calorie food'. In the case of 'moderate interest in dietary life group', 'low-sodium food' was the most common, followed by 'low sugar food', 'low calorie food', and 'nutritious meal'. In the case of 'low interest in dietary life group', 'low sugar food' was the most common, followed by 'low-sodium food', 'various new menu', and 'easy-to-carry dehydrated food'. For the 'high interest' group, the highest proportion of consumers were male in between the ages of 20 to 29, married, and worked in an office job. The 'high interest' consumers also showed a tendency to pay '15,000 to 20,000 KRW' per single purchase. The 'normal interest' group consisted of an even proportion of male and female consumers, with the most common age range being from 30 to 39 years, and most were married. These consumers preferred to spend 'less than 10,000 KRW' or '10,000 KRW to 15,000 KRW' per single purchase, which is in the lower price range for HMR purchases. The 'low interest in dietary life group' had more females gender-wise, were unmarried, and worked in an office job, For a single purchase, the 'low interest' group chose to pay less than 10,000 KRW, which is relatively lower than the other two clusters. The results of this study can be used as baseline data for building marketing strategies for HMR product development. It can also provide basic data and directions for new HMR export products that reflect consumer needs in order to create a market segmentation strategy for industrial applications.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.353-360
• /
• 1984

As an effort to expand the utilization of mackerel which has been thought disadvantageous to processors due to the defects in bloody dark color of meat, high content of lipid, and low stability of protein, and to develope a new type of product, so called, preservative fish meat paste, the processing method was studied in which dielectric heating was applied by means of cooking, pasteurization, dehydration, and control of water activity. The principle of this method is based on that dielectric heating can initiate a rapid dispersion or displacement of moisture in the meat tissue so that the level of water acivity can be controlled by dehydration with hot air meanwhile the product is cooked, pasteurized, and texturized. And the product is finally heated with electric heaters and vacuum sealed to stabilize water activity and storage stability. In present paper, a formula for preparing the fish meat-stach paste, the conditions of dielectric heating and dehydration, shape and size of the product, and other parameters were tested to optimize the process operation. A formula of the fish meat-starch paste to provide proper textural properties and water activity was $10\%$ starch, $1.5\%$ salt, $3\%$ soybean, $0.6\%$ MSG, $2\%$ sucrose, and $3\%$ sorbitol against the weight of fish meat. A proper shape and size of the product to avoid foaming and case hardening during heating was sliced disc of 8 cm $diameter{\times}0.8$ cm thickness or $10{\times}10$ cm square plate with 1.0 cm thickness. The disc shape was recommended because it resulted more uniform heating, minimum foaming and case hardening. And it was also advantageous that disc was simply provided when the fish meat disc was stuffed in the same, solidified in boiling water for 2 to 3 minutes, and sliced. Condition of dielectric heating was critical to decide the levels of sterility, water activity, and textural property of the product. The temperature at the center of the meat disc slices was raised up to $95^{\circ}C$ in 1.5 minutes so that continuous exposure to microwave caused expanded tissue and hardening ending up with a higher water content. Heating for 5 to 6 minutes was adequate to yield the final water activity of 0.86 to 0.83(35 to $40\%$ moisture). It is important, however, that heating had to be done periodically, for instance, in the manner of 2.0, 1.5, 1.5, and 1.0 minute to give enough time to displace or evaporate moisture from the meat tissue. The product was dehydrated for 2 to 3 minutes by hot air of $60^{\circ}C$, 3 to 5m/sec and finally exposed to electric heaters for 5 to 6 minutes until the surface was roasted deep brown. These conditions of heating and dehydration resulted in a complete reduction of total plate count from an initial count of $5.3{\times}10^6/g$ to less than $3{\times}10^2/g$. General composition of the product was $40.1\%$ moisture, $20.8\%$ protein, $17.4\%$ lipid, $16.2\%$ carbohydrate, and $5.5\%$ ash. Textural properties revealed folding test AA, hardness 42, cohesiveness 0.53, toughness 4.6, and elasticity 0.8.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1083-1093
• /
• 2007

The purpose of this study was to investigate the difference between students' beverage preference and dietitians' perception in elementary school lunch program. This study was conducted in three phases: (1) questionnaire development and survey administration to elementary school students (2) survey administration to dietitians who were in charge of the elementary school food service, and (3) comparison of beverage preferences between elementary school students and dietitians. In phase I, 703 elementary school students in Seoul were surveyed from July 11 to July 19. In Phase II, 100 school food service dietitians in Seoul participated by mail survey from September 15 to October 30, 2006. Based on the results, elementary school students tended to show a neutral milk preference (mean=3.04), whereas dietitians perceived that elementary school students had lower milk preference (mean=2.67). Also dietitians perceived higher yogurt preference (mean=4.27) than the real elementary school students' preference (mean=4.02). T-test results showed the gender difference on milk and yogurt preference. Male students had higher milk preference (t=4.912, p<0.001) and yogurt preference (t=3.621, p<0.001) than female students. Elementary school students showed high fruit juice preference (mean=4.34); however, dietitians perceived lower fruit juice preference of students (mean=3.92). There was no gender difference on fruit juice preference. Though elementary school students had higher fruit juice preference, the frequency of fruit juice served in school lunch was quite low. Over half of the dietitians reported that they served fruit juice less than once a semester. The results of this study indicated the existence of distinctive difference between students' fruit juice preference and school lunch menu offerings.