• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.753-763
• /
• 2020

A wind tunnel test of 29.7% scaled model of NASA Common Research Model with belly model support was performed in small low speed wind tunnel. The static aerodynamic forces and moments of CRM were measured with belly sting support configuration. Pitching moments of belly sting with various fairings were compared and small interference fairing shape was found. The belly sting model support interference and reducing effect of fairing shapes with CFD analysis.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.85-88
• /
• 2012

루프 페어링은 화물차의 주행저항 및 유도항력을 줄이기 위해 설치되는 장치 중 하나이다. 이 장치는 화물차의 지붕 윗부분에 설치하여 화물차가 받는 항력을 줄이는데 사용이 된다. 이번 과제에서는 루프 페어링의 효과에 대해 유체역학적인 증명 및 확인을 위해 루프 페어링의 설치 전-후 트럭의 형상에 따른 유동의 변화와 항력계수의 값을 EDISON CFD를 사용하여 구한 후 각각 비교 하였다. 이를 위해 EDISON CFD의 압력 contour와 stream line, 정압계수(Cp)그래프를 통해 트럭의 주행 중 발생하는 박리현상을 가시적으로 확인하였고, 항력계수(Cd)값을 비교하는 것을 통해 루프 페어링을 설치한 경우가 미설치된 경우보다 주행 시 더욱 유리하다는 것으로 결론을 내렸다.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.113-116
• /
• 2006

In this paper, the fairing effects on the aerodynamics stability of basic plate-girder sections are investigated trough wind tunnel tests. As basis sections, two types of $\pi$-type shape sections with aspect ratios(D/B) of 1/5 and 1/10 are employed as the basic sections. And three types of triangular fairings are applied such as right-angled triangle(F1), inverted right-angled triangle(F2) and regular triangle(F3). The effects of attack angle on the dynamic response of each section are also investigated. As the results of experiments, fairings F2 is most effective to suppress flutter phenomenon or vortex induced vibration among three types of fairings.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.90-95
• /
• 2016

본 연구에서는 교육 및 연구를 위한 CFD 해석 프로그램인 EDISON_CFD 프로그램을 이용하여 화물 트럭의 후면부 형상변화에 따른 공력특성을 분석해보았다. 먼저 추가적인 부착물을 장착하지 않은 기본적인 형상의 화물트럭의 공력특성을 확인 후, 후면부에 여러 형상의 Boat tail(보트 테일)과 전면부에 Cap-roof fairing(캡루프 페어링)이 부착된 형상을 해석하여 트럭이 받는 항력 감소를 통해 최적형상을 찾아가는 연구를 수행하였다. Cap-roof fairing이 부착된 형상에서 $15^{\circ}$의 특성길이가 0.3인 Boat tail에서 가장 좋은 항력 감소 효과를 얻을 수 있었다. Cap-roof fairing의 경우 6%의 항력 계수 감소를 보였고, Boat tail에서 20%의 항력 계수 감소효과를 관찰할 수 있었다. Boat tail의 각도와 길이를 변수로 하여 여러 해석을 진행한 결과 최적화된 형상을 선정할 수 있었다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.439-442
• /
• 2002

In this study, a turbulence simulation is carried out in a suction type wind tunnel using grids, where turbulent flows with various turbulence intensity are successfully produced by the change of grid size, arrangement of grids and settling position, respectively. Response tests of rectangular cylinder models with aspect ratio of 2 and 4 are carried out in smooth flow and generated turbulent flows. Additionally, two types of fairing are considered such as right triangle and regular triangle. The effects of wind velocity fluctuations and fairing are discussed on vortex-induced oscillation.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.309-316
• /
• 2015

The contribution of exterior devices such as bogie fairings and pantographs to running resistance was estimated on the basis of coasting tests at up to 350 km/h with the help of the Korean Next Generation High speed train (HEMU-430X). In order to assess the reduction of air resistance by nose car's bogie fairing, coasting tests were conducted with a removable bogie fairing at various speed ranges. And, the contribution of the pantograph to air resistance was also estimated with coasting tests that include the pantograph's rising and descent modes. The linear regression method was used to examine decelerations from time-velocity data and the equation of resistance to motion is proposed from the deceleration data. From the aerodynamic term of the equation of resistance to motion, the contribution to air resistance by nose car's bogie fairing and pantograph was estimated. The results show that the air resistance was reduced by about 3.8% by the nose car's bogie fairing. And, the 3.9% increase of air resistance by the pantograph (open knee mode) has been found.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.351-363
• /
• 2020

Launch vehicles are subject to airborne acoustic loads during atmospheric flight and these effects become pronounced especially in transonic region. As the vibration due to the acoustic loads can cause malfunction of payloads, it is essential to predict and reduce the acoustic loads. In this study, a complete process has been developed for predicting airborne vibro-acoustic environment inside the payload pairing and subsequent noise reduction procedure employing acoustic blankets and Helmholtz resonators. Acoustic loads were predicted by Reynolds-Averaged Navier-Stokes (RANS) analysis and a semi-empirical model for pressure fluctuation inside turbulent boundary layer. Coupled vibro-acoustic analysis was performed using VA One SEA's Finite Element Statistical Energy Analysis (FE-SEA) hybrid module and ANSYS APDL. The process has been applied to a hammerhead launch vehicle to evaluate the effect of acoustic load reduction and accordingly to verify the effectiveness of the process. The presently developed process enables to obtain quick analysis result with reasonable accuracy and thus is expected to be useful in the initial design phase of a launch vehicle.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.85-94
• /
• 2012

In this paper, we develop the new gestures of screen control with fingers on the FTIR multi touch table. It also describes recognition of mobile devices on the table using infrared camera. The FTIR multi touch table was incovenient to the existiog Bluetooth connection, because it is not provided with an HID(Human Input Device) interface. The proposed data transmission method using mobile device is to relieve the inconvenience of the data transfer and proceed more effectively. The new gestures and data transmission method is verified by FTIR multi touch table that is implemented for testing.

• Journal of the Korean Institute of Gas
• /
• v.3 no.1
• /
• pp.64-74
• /
• 1999

Using the steady state gains, an appropriate criterion used for the interaction analysis among variables and the loop pairing is suggested. Based upon the suggested criterion derived from the derivative relation of implicit function, the SISO pairing which has minimum interaction among control system variables and good control performance can be determined. The relative effect among diagonal gains and off-diagona gains, which was not considered in other criteria, can be explained deterministically Also, the criterion can be easily applied to partial MIMO pairing. This criterion was applied to several examples to illustrate its usefulness in finding the feasible SISO pairing and MIMO pairing

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.793-801
• /
• 2022

Most Bluetooth devices are commonly used in various ways these days, but they can be often lost due to small-size devices. However, most Bluetooth protocol do not provide authentication functions to legitimate owners, and thus someone who obtains the lost Bluetooth device can easily connect to their smart devices to use it. In this paper, we propose NBAS can authenticates legitimate owners using NFT on lossy Bluetooth devices.NBAS generates a digital wallet on the blockchain using the decentralized network Ethereum blockchain and facilitating the MAC address of the Bluetooth device in the digital wallet. The owner of the wallet uses a private key to certify the Bluetooth device using NFT. The initial pairing time of NBAS was 10.25 sec, but the reconnection time was 0.007 sec similar to the conventional method, and the pairing rejection time for unapproved users was 1.58 sec on average. Therefore, the proposed NBAS effectively shows the device authentication over the conventional Bluetooth.