• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.75-81
• /
• 2004

To solve the urban flood problems, it must get the enough channel conveyances and pumping capacities. It needs set up the detention system to control the flow over the channel capacity. Inspite of this detention system, the peak flow may increased by rainfall distribution and the delay of flow. This shows a design model of detention system which can consider the time problems from mutual connections of the detention storages and pumping flow using IDP(Incremental Dynamic Programming) method.

• Journal of Power System Engineering
• /
• v.16 no.5
• /
• pp.26-31
• /
• 2012

A numerical study has been carried out to investigate the heat and mass transfer of an oil pumping system with a variable shape of the housing using the CFD method. Especially, the electric motor and the pump combined together, accomplishes a research about the oil supplying system. In this study, the temperature and velocity distribution of the oil pumping system by varying the flow rate of supplying oil have been investigated. The temperature changes with each five conditions(flow rate of supply oil : 2, 4, 8, 12, and 16 liter/min) have also been studied. The numerical results show that the exhaust temperature decreases as the flow rate of the supplying oil increases. It also reveals that the temperatures change differently with the housing shape.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.141-145
• /
• 2004

The residual propellant of satellite is the primary factor of satellite life. This propellant used in the satellite is stored as liquid in tanks. But it is very difficult to accurately measure propellant to be used for maintaining of satellite by an irregular influence of environment. In this paper, a new method of gauging propellant residual of satellite employing multi-tank system by measuring mass flow of thermal pumping liquid propellant is presented. In cases of being connected between tanks, propellant in tanks move by temperature difference of tanks. If propellant mass flow is measured at line between tanks, residual propellant in tanks is able to be estimated.

• Journal of the Korean Geophysical Society
• /
• v.7 no.2
• /
• pp.151-155
• /
• 2004

To solve the urban flood problems, it must get the enough channel conveyances and pumping capacities. It needs set up the detention system to control the flow over the channel capacity. Inspite of this detention system, the peak flow may increased by rainfall distribution and the delay of flow. This shows a design model of detention system which can consider the time problems from mutual connections of the detention storages and pumping flow using IDP(Incremental Dynamic Programming) method.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.229-236
• /
• 2008

The optimum conditions of second harmonic generation (SHG) can be successfully achieved experimentally using single pass and double pass methods of a pumping beam. The beam has a power of several Watts radiated by a DOFA (Diode Laser Oscillator & Fiber Amplifier) system, which is a high power CW wavelength tunable infrared laser system, in a PPLN (Periodically Poled MgO doped Lithium Niobate) nonlinear crystal. In the case of a single pass method, the parameters are the wavelength of 535 nm for SHG and the output power of 245 mW generated from the pumping input beam with wavelength of 1070 nm and the power of 2.45 W at phase matching temperature of $108.9^{\circ}C$. The conversion efficiency of SHG was 10%. In order to enhance the output of SHG, the double pass method of the SHG system of a PPLN using a concave mirror for the retroreflection and a pair of wedged flat windows for phase compensation was also presented. In this double pass system, we obtained the SHG output beam with the wavelength of 535 nm and the maximum power of 383 mW at optimum phase matching temperature of $108.5^{\circ}C$ by using an incident pumping beam with wavelength of 1070 nm and the power of 2.45 W. The maximum conversion efficiency is 15.6%, which is more than that of the single pass method.

• Korean Journal of Optics and Photonics
• /
• v.6 no.2
• /
• pp.115-121
• /
• 1995

본 논문에서는 일체형, Nd:YAG 고리 레이저에서 서로 반대방향으로 진행하는 두 모드의 비선형적인 상호작용에 의한 출력 불안정 현상을 조사하였다. 실험을 통하여 두 모드가 각각 단일 종모드로 발진함을 확인하였고, 레이저가 발진하는 임계치 부근의 낮은 펌핑수준을 유지하여 다중모드간의 경쟁이나 단방향 발진에 의한 출력 불안정이 아님을 확인하였다. 또한 잘 알려진 시스템 고유의 감쇄진동과 구별되는 현상임을 보였다. 두 모드간의 손실차가 클수록 이 출력의 변조주파수는 증가하고 변조폭이 줄어 들어 안정화 되며 단방향 발진이 일어난다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.140-141
• /
• 2003

광섬유 통신에서 넓은 대역폭 증폭을 이루기 위하여 광대역 증폭기가 필요하다. 증폭기의 대역폭을 넓히기 위해 C-대역과 L-대역 EDFA를 결합하여 사용하는 등의 여러 가지 방법이 제안되고 있다. 그 중 L-대역을 결합하는 방법이 실제 시스템 적용에서 가장 즉시 이용가능한 방법이라 할 수 있다. L-대역 EDFA의 경우 상대적으로 이득이 낮으며 효율이 떨어진다. 이득이나 효율을 높이기 위해서 FBG, 양방향 펌핑(bidirectional pump), 그리고 이중경로(double-pass) 구조를 이용하는 방법이 제안되었다. (중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1100-1109
• /
• 2022

Herein, a case study was conducted on the bilge pumping performance of a 24,000TEU class container ship with an overall length of 400m. Although the bilge system of the 24,000TEU class container ship was designed in accordance with the rule requirements of the Classification Society, the bilge system did not satisfy the 2 m/s requirements of SOLAS Reg.II-1/35-1 under the rated flow rate and maximum flow rate conditions of the bilge pump installed in the ship. In particular, assumptions were made that No.1 ~ No.4 cargo holds were flooded and filled entirely by sea water and the evaluation of bilge pumping performance had been performed for No.1 ~ No.4 cargo holds. According to the evaulation results of the, the mean water velocity at the main bilge pipe for No.2, No.3, and No.4 cargo holds did not meet the 2 m/s criterion. To resolve this problem, in this study, the branch bilge pipe in each cargo hold was changed from 150A to 200A and the mean water velocity at the main bilge pipe for No.2, No.3, and No.4 was calculated as 2.479m/s, 2.476m/s, and 2.459m/s, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.73-76
• /
• 2009

Generally, wind or solar power system is operated as a stand-alone power system, the efficiency of which could be higher by designing wind-solar combined system considering average wind speed and solar radiation of the desert region, Mongolia. This system is designed to generate electricity for power users and pumps the ground water for irrigation using deep well pump. The ground water can be used for farming or forestation where there is no or little irrigation system. In connection with this study, a renewable energy park, Green Eco Energy Park, was developed at about 50km east of Ulaanbaatar. 3 sets of 10kW wind power generator and 70 kW of solar power module were installed there. The electricity generated from the system is used to on-site office building and deep well pump for ground water pumping. A 10kW stand-alone solar pumping system, which has no rechargeable battery system, is installed to pump the ground water with the amount of generated power. The ground water is stored in 3 artificial ponds and then it is used for raising nursery tree and farming. The purpose of this study is to provide a possible energy solution to desert regions where there is no or little power system. The system also supply power to ground water pump, and the water can be used for farming and forestation, which will also be a solution of preventing desertification or spreading of desert area.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.64-65
• /
• 2002

파장가변 색소 레이저는 고분해능 분광학, 이온화 분광학, 원격감시용 Lidar 시스템 또는 의료용 레이저 분야 등에서 널리 사용되고 있다. 특히, 의료용 안정동위원소를 생산하는 기술의 한 방법으로 파장가변 색소 레이저를 사용하고 있다. [1] 이러한 시스템의 레이저는 안정적 동작은 물론이고, 동위원소 추출의 생산 단가를 낮추기 위하여 레이저 동작을 연속적으로 할 필요가 있다. 그러나, 레이저 색소를 이득매질로 사용하는 파장가변 레이저는 광펌핑하여 레이저를 동작시키는데, 이 때 광표백효과 및 색소수명감소에 따라서 색소 용액의 교체가 필수적이다. (중략)