• Title/Summary/Keyword: 펌프시스템

Search Result 1,532, Processing Time 0.042 seconds

Inundation Analysis in Urban Area Resulting from River Overflow during Typhoon Event (태풍권 발생 시 하천범람에 따른 도시지역 침수해석)

  • Keum, Ho Jun;Lee, Jae Yeong;Kim, Hyun Il;Cho, Hong Je;Han, Kun Yeun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.413-413
    • /
    • 2018
  • 최근 도시지역에 태풍과 집중호우로 인한 홍수발생 빈도와 그 규모가 커지고 있다. 이에 따른 재산 및 인명피해 양상도 매우 심각한 상황이다. 태풍 차바 처럼 강력한 10월 태풍의 출현은 지구 온난화의 전조로 받아들여지고 있다. 또한 10월 태풍임에도 초속 56.5m의 순간 최대풍속과 시간당 최대 116.7mm(제주 서귀포), 139mm(매곡) 등의 강수량은 지역 최대 강수량을 기록함으로써 이제 언제나 태풍 및 홍수에 대한 대비가 필요하게 되었다. 현재 재해에 대비하기 위해 다양한 대책들은 꾸준히 마련되어지고 있으며, 설계 기준 또한 강화되었다. 그러나 저류조 및 배수펌프장 등의 시설물 설치에는 막대한 예산이 필요한데다 장기간의 시간이 필요하며, 비구조적 대책도 마련되어 있으나 태풍 차바의 사례에서 경험한 것처럼 재해 발생 시 대책과 구체적인 방안의 마련이 더욱 시급해 보인다. 이에 본 연구에서는 태풍 차바 시의 호우에 대하여 UNET모형에 의한 부정류모의를 수행하였다. 부정류모의의 경계조건으로써 상류단 경계조건과 측방유입량 조건은 HEC-HMS를 이용하여 유출해석을 실시한 다음 입력 자료로 이용하였으며, 하류단 경계조건으로는 국토부 관할 수위지점의 수위를 이용하여 UNET 모형에 의한 수리학적 하도추적을 수행하였으며, 저지대 침수분석은 지형정보시스템 응용프로그램 중 하나인 ArcGIS를 활용하여 대상유역의 벡터자료를 구축하고 인접도엽의 접합 및 보정을 실시하여 수치고도자료를 생성하여 2차원 홍수범람해석을 위한 HEC-RAS 5.0을 적용하여 침수분석을 수행하였다. 본 연구의 결과를 수재해 피해저감 대책을 수립하는데 기초자료로 활용될 수 있을거라 판단된다.

  • PDF

Analysis of Effective Soil Thermal Conductivities and Borehole Thermal Resistances with a Power Supply Regulation (부하변동에 의한 지중유효열전도도와 보어홀 전열저항 해석)

  • Ro, Jeong-Geun;Yon, Kwang-Seok;Song, Heon
    • Journal of the Korean Solar Energy Society
    • /
    • v.31 no.4
    • /
    • pp.80-86
    • /
    • 2011
  • Investigation of the effective soil thermal conductivity(k) is the first step in designing the ground loop heat exchanger(borehole) of a geothermal heat pump system. Another important factor is the borehole thermal resistance($R_b$). Thermal response tests offer a good method to determine the ground thermal properties for the total heat transport in the ground. This is done by supplying a constant heat power into a borehole heat exchanger. There are two methods to supply a constant heat power. One is to employ the electricity provided by Korea Electric Power Corporation(KEPCO). The other is to use electricity generated by a generator. In this study, the power supply regulation was found to reduce when the electricity generated by the generator was used. This is because the generator evaluated with the power supply characteristically reduces the power supply regulation between an overload and a complex using. But it sometimes occurs a power supply regulation in In-situ thermal response test. In this case getting of k,$R_b$ requires delay times and restored normal state. However, the effect of the delay times and restored normal state on the soil thermal conductivity and borehole thermal resistance is very small. Therefore it is possible to use a generally accepted delay times and restored normal state in the analysis. In this work, it is also shown that an acceptable range of ${\Delta}k$, ${\Delta}R_b$ for normal state and regulation state might be approximately 0.01-0.16W/m k, and -0.004-0.007m K/W, respectively. Thus, restored normal state of power supply regulation is valuable to recommend.

A Fundamental Study on Heat Pump System for Classroom using River Water (하천수를 이용한 교실 냉난방 열펌프 시스템의 기초연구)

  • Baik, Seung-Moon;Moon, Choon-Geun;Yoon, Jung-In;Jeong, Seok-Kwon;Park, Jong-Un
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.16 no.2
    • /
    • pp.181-186
    • /
    • 2004
  • The current situation of heating and cooling system of the classrooms of our country is rather poor compared not only to those of the developed nation's classrooms but also in case of other buildings such as financial institutions, office compounds. In winter, especially students have been in hatred state with respect to their health due to the fact that the heater is operated by petroleum. Korea has been heavily dependent on foreign nations for the very fact of importing energy in the form of oil or natural gas. So it is important to conserve energy and the picture with respect to energy remains similar till today as it was in long past periods. The purpose of this study is to contribute actively in energy economy and facilitate towards a healthy school life of students and other institutions proving a system of extracting energy from river water and then converting it into heat which can stand as an effective alternate of expensive oil or gas. Installing oil-stove based heating system at classrooms of school could get considerable attentation in several respects. The proposed heat energy could be collected unlimitedly both in time and in amount. The stable and uninterrupted heat energy from river water, optimally utilizing the typical-regional and geographical characteristics has the potential to be long-lasting in duration, cheap in energy economy and beneficial to health as well.

Analysis of the Sensitivity and Future Changes in Runoff Characteristic of the Urban Stream Using SWMM (SWMM모형을 이용한 도시하천의 민감도 및 미래 유출특성 분석)

  • Hwang, Sung-Hwan;Lee, Bo-Ram;Yoon, Tae-Hyung;Moon, Young-Il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.604-604
    • /
    • 2015
  • 급속한 도시화와 산업화로 보수 및 유수기능이 감소하였고, 세계적인 기후변화로 국지성호우가 빈번히 발생하여 기존 우수관망시스템의 문제점이 야기되고 있다. 최근 발생하는 도시유역의 홍수 피해는 대부분이 내수에 의한 침수 피해로 이러한 피해를 감소시키기 위해서는 도시하천에 적합한 강우-유출모형을 이용하여 침수 위험 유역을 정확히 예측하여 사전 보강 및 예 경보를 수행하는 것이 중요하다. 따라서 본 연구에서는 최근들어 잦은 침수피해가 발생한 도림천 유역을 대상으로 강우-유출모형인 XP-SWMM을 이용하여 민감도 및 미래 유출 특성변화 분석을 수행하였다. 첫 번째로, 지형자료 및 관거 자료, 2014년에 완공된 저류지 및 펌프시설 자료를 모두 적용하여 유역의 특성을 최대한 반영한 모형을 설계하고 실측유량과 모형유량을 비교하여 최적화된 모형임을 확인하였다. 두 번째로, 최적화된 모형의 매개변수를 기준으로 인자별 민감도 분석을 수행하여 현재 도림천의 유출특성을 살펴보았다. 마지막으로 미래 경향을 예측할 수 있는 인자인 강우량과 불투수율의 경향성을 반영하여 도림천 유역의 미래 유출특성(첨두유출량, 침수심, 침수면적, 홍수위)의 변화를 검토하였다. 민감도 분석결과 강우량을 20% 감소시켰음에도 최대 침수심과 침수면적이 3.772m, 침수면적이 $5.027km^2$로 여전한 내수침수가 발생하고 있어 도림천 유역이 치수로 부터 취약한 지역임을 확인하였다. 비정상성 빈도해석으로 강우를 산정하고 log형 회귀식으로 불투수율을 산정하여 도림천 유역의 미래 유출특성을 모의한 결과 2020년과 2030년의 최대침수심이 각각 4.9352m, 4.9954m로 현재의 최대 침수심(4.8093m)보다 평균 0.156m 증가하였다. 마지막으로 현재와 미래의 홍수위와 여유고를 이용하여 제방안전성 평가를 수행한 결과, 현재에도 전체구간이 안전구간으로 이루어져 있지 않으며 2030년으로 갈수록 안정단면은 평균 8.5% 감소하고 위험단면은 평균 17% 증가함을 확인하였다. 향후 본 연구의 결과를 이용하여 추후 침수피해 저감을 위한 대응방안 및 효과적인 대피소, 대피경로 수립 등에 활용 가능할 것으로 판단된다.

  • PDF

Development of Automatic Flood Protection Wall to Prevent Inundation of Inland (내수침수방지가 가능한 자동차수벽에 관한 연구)

  • Kim, Ji Ho;Lee, Gyu Won;Park, Young Jin;Chang, Jung Soo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.373-373
    • /
    • 2019
  • 도시화로 인해 인구가 도시로 집중되고, 불투수층이 증가되어 유출율이 지속적으로 커지고 있다. 또한 최근의 기후변화에 의하여 홍수 및 침수가 빈번해짐에 따라, 도시에서 내수침수를 방지하기 위한 새로운 패러다임이 필요한 실정이다. 기존 내수침수 해결방안은 배수능력을 증가시키기 위해 하수관거 용량을 키우고, 펌프장을 증설하였으나, 국지적이고 기습적인 집중호우가 내리는 경우에는 국민의 생명과 재산을 보호하기 어려운 부분이 있다. 이에 따라 지하방수로와 도시물순환 등 중장기계획이 수립되고 있으나, 지하철 출입구, 지하 주차장 출입구, 건물 외부 출입구 등 평상시에는 출입구로 사용하다가 홍수시에 내수침수를 방지하기 위한 차수벽에 대한 다양한 연구는 미흡한 실정이다. 국내 외 차수벽에 대한 조사 및 분석결과 국외의 경우 자동 수동 반자동의 다양한 차수벽이 제시되어 있으나, 국내의 경우에는 이제야 제품개발이 시작되고 있는 것으로 나타났다. 특히, 내수침수 피해가 큰 영국이나 미국의 뉴욕시의 경우 건축법에 의해 내수침수피해를 막을 수 있는 가이드라인이 제시되어 있으며, 실증실험도 진행되고 있으나 국내의 경우에는 미비한 실정이다. 본 연구는 국내 외 차수벽에 대한 조사 및 분석을 수행하고, 자동차수벽을 위한 가이드라인을 제시하며, 수치모의와 수리모형실험을 통해 국내에서 사용가능한 적정 자동차수벽을 제시하고자 한다. 특히, ICT와 연계를 통해 원격제어 및 관리가 되도록 시스템을 구성하도록 한다. 이에 따라 본 연구를 통해 국내에서 사용가능한 내수침수방지가 가능한 자동차수벽이 제시된다면, 기후변화와 도시화에 대응하는 재난대응기술이 되어 내수침수가 빈번한 도시의 홍수복원력을 확보하고 국민의 생명과 안전을 확보할 수 있으리라 판단된다. 또한 기술연구를 통해 상용화된다면 국내 및 국외시장에 진출이 가능하리라 본다.

  • PDF

Development of a Groundwater Source Heat Pump in a Fractured Rock Aquifer (암반 대수층에서 개방형 지열 시스템의 개발 및 적용)

  • Shim, Byoung Ohan;Kim, Seong-Kyun;Choi, Hanna;Lee, Soo-Hyoung;Ha, Kyoochul;Kim, Yongchul
    • New & Renewable Energy
    • /
    • v.17 no.3
    • /
    • pp.32-41
    • /
    • 2021
  • A groundwater source heat pump (GWHP) was developed in this study by adapting a borehole heat exchanger with closed-loop and open-loop systems in a new building. In the pilot test building, the air-conditioning on the second floor was designed to employ a closed-loop system and that on the third floor had an open-loop system. The GWHP design is based on the feasibility of groundwater resources at the installation site. For the hydrogeological survey of the study site, pumping and injection tests were conducted, and the feasibility of GWHP installation was evaluated based on the air-conditioning load demand of the building. The site was found to be satisfactory for the design capacity of the thermal load and water quality. In addition, the effect of groundwater movement on the performance of the closed-loop system was tested under three different operational scenarios of groundwater pumping. The performance of the system was sustainable with groundwater flow but declined without appropriate groundwater flow. From long-term observations of the operation, the aquifer temperature change was less than 2℃ at the observation well and 5℃ at the injection well with respect to the initial groundwater temperature. This pilot study is expected to be of guidance for developing GWHPs at fractured rock aquifers.

Estimation of Agricultural Water Return Flow Using a Network Model Based on Paddy Irrigation Areas (논배수로 네트워크 모형을 통한 농업용수 회귀수량 산정 방안)

  • Inkyo Choo;Junhwa Lee;Adigun Ismail Adebayo;Younghun Jung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.407-407
    • /
    • 2023
  • 최근 환경부에서 발표한 국가물관리기본계획에서 수자원 총량 중 생활·공업·농업·유지용수의 이용량은 365억m3/년으로 약 29.4%로 발표되었다. 유지용수를 제외한 농업용수 이용량의 비중은 약 60.5%이며, 이 중 약 80%가 논에서 활용되고 있다. 이러한 농업용수 이용량 중 사용되지 않고 하천으로의 방류량이 존재하는데 이를 관개회귀수량이라하며, 농업용수의 약 35%가 하천으로 회귀된다 발표하나 지역에 따른 편차가 존재하기에 정확한 회귀수량을 산정하기엔 미흡한 실정이다. 따라서 본 연구에서는 네트워크 모형을 통한 용배수로 구축 이후 회귀수 정량화를 하고자 하며, 정량화를 위한 네트워크 모형은 EPA-SWMM(Storm Water Management Model) 모형을 활용하였다. 해당 모형은 미국 환경 보호국(U.S. Environmental Protection Agency, EPA)에서 개발한 네트워크 물리모형으로 다양한 환경적 요소에 따른 수문 영향을 확인 가능한 모형이다. 해당 모형의 다양한 네트워크 기능을 통해 논배수로 네트워크를 구축하여 회귀수 정량화를 진행하고자 한다. 논배수로 네트워크를 구축하기 이전 현장조사를 진행하였다. 현장조사를 통한 용수계통도를 작성하였으며, 모형의 입력자료로 필요한 네트워크 용배수로관 표고값을 측량하였다. 이후 현장조사 및 측량 자료를 활용하여 네트워크 물리모형의 입력자료 구축을 진행하였으며, 해당 자료 구축은 지리 정보 시스템 중 ArcGIS와의 연계를 통해 구축하였다. 모형의 수리학적 입력자료는 해당지역의 계측자료를 활용하였으며, 필지 사이의 내리흐름 및 펌프를 통한 용수 또한 네트워크 물리모형의 기능을 활용하여 구축하였다. 이후 계측자료와의 비교를 통한 매개변수 보정을 진행하였으며, 전체 논배수로에 대한 농업용수의 흐름 및 회귀수량을 분석하였다. 해당 연구를 통해 농업용수의 회귀수 산정 및 지역 편차에 따른 회귀수 정량화 등의 연구에 활용될 것으로 기대한다.

  • PDF

Study on Water Cycle Performance Evaluation Experiment of Permeable Block (투수블럭의 물순환 성능평가 실험에 관한 연구)

  • Jang, Young Su;Park, Jong Bin;Lee, Jae Hyuk;Kim, Jae Moon;Jung, Min Ho;Shin, Hyun Suk
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.331-331
    • /
    • 2020
  • 급격한 산업화와 도시화로 인한 도시유역의 불투수면의 증가와 이에 따른 배수능력의 저하로 인해 도시 물순환의 왜곡이 발생하였다. 따라서 과거 도시 물관리 기법의 한계가 나타났으며 이를 위해 저영향개발 기법 등과 같은 도시 물관리 기법의 패러다임이 변화하였다. 본 연구에서는 저영향개발 기법에서 도시유역 내 활용이 유용한 침투형 시설 중 투수블럭에 대한 물순환 성능평가를 실외실험을 통해 분석하였다. 성능평가 실험은 부산대학교 양산캠퍼스 한국 GI&LID 센터 내 투수블록 뿐만 아니라 블록 하부 골재층까지 설치가 가능하도록 되어있어 실제 현장과 유사한 환경을 구축이 가능한 2.4×10.9×0.4 (m) 규모의 주차장형 LID 실증시험시설을 활용하였다. 인공강우 분사를 위한 실외 인공강우모사 장치 크기는 2×2(m)으로 본 시험을 위하여 5개의 인공강우모사 장치를 연결하여 활용하였으며, 본 시험장치는 강우를 공급하기 위한 수조와 펌프, 일정한 유량을 유입하기 위한 유량계, 강우를 분사하기 위한 노즐, 인공강우가 실제 강우와 같이 자유낙하 하도록 구현하기 위한 오실레이터 등으로 구성되었다. 시험대상인 틈새투수블록은 석재블록 규격 400×600×100 mm이며 재질은 받침안정층(흙), 투수블록(화강석)으로 구성되어 있다. 실험의 시나리오는 시험체에 강우강도 30mm/hr, 50mm/hr, 100mm/hr에 해당하는 양을 1시간 동안 유입하여 시험 시작 후, 강우지속시간, 표면유출지속시간, 표면유출량을 1분 단위로 측정. 시험체에 유공관이 설치된 경우에는 침투유출지속시간, 침투유출량도 함께 1분 단위로 측정하였으며 각 강우강도별로 측정하고, 1회 측정 후, 각 시험별 시험 대상체의 조건을 같게 하기 위한(하부 지반의 건조) 약 3일 이후(상황에 따라 변동 가능) 시험하였다. 본 실험의 결과, 강우강도가 30 mm/hr와 50 mm/hr인 경우에는 화강석 틈새투수블록포장에서 지표 유출이 발생하지 않았으며, 강우강도 100 mm/hr의 경우 260 L의 지표 유출이 발생하여, 불투수표면 대비 84%의 지표유출 저감률을 보여줌으로서 투수블럭에 물순환 성능에 대한 효과를 분석하였다.

  • PDF

Urban Flood Simulation Considering Building and Sewer Lines (건물 및 우수 배제를 고려한 시가지 범람해석)

  • Kang, Sang-Hyeok
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.3B
    • /
    • pp.213-219
    • /
    • 2009
  • In densely urban areas, features such as the sewer system, buildings and river banks have an effect on flow dynamics and flood propagation, and will therefore be accounted for in the model set-up. While two-dimensional (2D) flood models of urban areas are at the forefront of current research into flood inundation mechanisms, they are however constrained by inadequate parameters of topography, and insufficient and inaccurate data. In this study, an urban flood model (overland flow, 2D urban flood flow and sewer flow) was combined and applied at Samcheok city which was damaged by inundation in 2002, in order to simulate inundation depth. The influence of buildings and pumping capacity was also analyzed to estimate the inundated depth in the study area. As a result, it was found that urban inundated depth are affected by pumping capacity directly and it increased about 20-30 cm on most of the modeled area with a building share rate of 0.2-0.6 per unit grid.

Characteristic Changes of Swine Manure by Air Suction Composting System (돈분 퇴비화 시 공기 흡입 시스템에 따른 퇴비화 특성 변화)

  • Lee, Dong-jun;Kim, Jung Kon;Jeong, Kwang-Hwa;Cho, Won-Mo;Ravindran, B.
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.24 no.3
    • /
    • pp.63-74
    • /
    • 2016
  • The objective of this study was to investigate the variations of physico-chemical properties during the swine manure composting, sawdust as the bulking agent was composted at different points (Top layer, Side of middle layer, Bottom layer). Air suction system with constant bottom aeration in bench scale reactors (30 L). The highest temperature was reached in the range of $58^{\circ}C$ to $62^{\circ}C$ on $3^{rd}$ day and this thermophilic phase (> $50^{\circ}C$) was continued for 3 days in all the treatment mixtures. However, the temperature was gradually decreased to room temperature at the end of 60 day composting process. Except control, the discharged ammonia ($NH_3$) was a maximum in the treatment order of Top layer>Bottom layer>Side of middle layer as 500 ppm, 162 ppm and 120 ppm, respectively, on the $4^{th}$ day and showing that Top layer point Air suction produce much more ammonia content than the other point. During the composting process, the total Kjeldahl nitrogen (TKN) was gradually increased due to the mass loss in the composting mixtures. At the same time, C/N ratio was decreased to Top layer, 13; Side of middle layer, 12 and Bottom layer, 13 at Air suction points. The significant reduction of C/N ratio in all different air suction system when manure was matured. The $NH_4-N$ to $NO_3-N$ ratio was recorded as 10.52 at the initial stage of the compost mixtures and reduced to 0.97 (Top layer), 0.70 (Side of middle layer), 3.2 (Bottom layer) because of manure decomposition. The overall results revealed that Top layer and Side of middle layer Air suction is a suitable option when compared other point for high quality composts.