• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.40-41
• /
• 2011

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1324-1335
• /
• 1991

In this paper, a phoneme separation and an establishment of discriminative pattern of Korean phonemes are studied on experiment. The separation uses parameters such as pitch extraction, glottal peak pulse width of each pitch. speech duration. envelope and amplitude bias. The first pitch is extracted by deviations of glottal peak and width. energy and normalization on a bias on the top of vowel envelope. And then, it traces adjacent pitch to vowel in whole. On vewel, amethod to be reduced gliding pattern and the possible of vowel distinction to be used just second formant are proposed, and shrinking pitch waveform has nothing to do with pitch length is estimated. A pattern of envelope, spectrum, shrinking waveform, and a method of analysis by mutual relation among phonemes and manners of articulation on consonant are detected. As experimental results, 90% on vowel phoneme, 80% and 60% on initial and final consonant are discriminated.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.133-136
• /
• 2004

AC PDP의 구동방법 중 가장 대표적인 구동 법이라 할 수 있는 ADS 구동 법은 구현이 비교적 용이하고, 안정적인 구동특성으로 인하여 현재 많은 상용 AC PDP의 구동 법으로 널리 채택되고 있다. 본 논문은 현재 AC PDP의 주요 연구 분야 중에 하나인 고속 어드레싱에 관한 새로운 구동파형을 소개하였다. 기존 AD을 구동법은 초기화구간과 어드레스구간 그리고 유지구간이 명확히 분리되어 있어 FULL- HD급 화면을 구현하기 위해서 어드레싱에 소비되는 시간의 감소가 불가피하다. 이러한 문제를 해결하기 위하여 어드레스 펄스폭을 줄여주지만, 이로 인하여 불안정한 어드레싱을 초래하게 된다. AC PDP의 초기화 구간의 파형은 이후의 어드레스 특성에 중요한 영향을 끼치는데, 초기화간에 형성된 priming 입자는 어드레스 방전에 크게 도움을 준다. 본 논문은 초기화구간이 끝난 후 priming 효과가 급격히 떨어지는 80us이후에 벽전하 형성을 돕는 벽전하 가속펄스의 사용으로 짧은 어드레스 펄스폭으로 인한 불안정한 어드레싱을 보완하고, 어드레스 과정 후 유지방전 모드로의 벽전하의 형성을 빠르게 유도할 수 있어 1us의 짧은 어드레스 폭으로도 안정적인 어드레싱을 수행할 수 있도록 하였다.

• Journal of Advanced Navigation Technology
• /
• v.6 no.2
• /
• pp.97-103
• /
• 2002

A recent technology trends in synthetic aperture radar(SAR) requires the ultra high resolution performance in detecting and precisely identifying the targets. In this paper, as a technique for enhancing the radar range resolution, the wide band chirp connection algorithm is presented by stitching the several chirp modules with unit bandwidth based on the linear frequency modulated chirp signal waveform. The principles of the digital chirp signal generation and its architecture for implementation is described with the wide band chirp signal generator, modulator, and demodulator. The performance analysis for the presented algorithm is given with the simulation results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2003

A recent technology trends in synthetic aperture radar(SAR) requires the ultra high resolution performance in detecting and precisely identifying the targets. In this paper, as a technique for enhancing the radar range resolution, the wideband chirp connection algorithm is presented by stitching the several chirp modules with unit bandwidth based on the linear frequency modulated chirp signal waveform. The principles of the digital chirp signal generation and its architecture for implementation is briefly described, and the wideband chirp signal generator, modulator, and demodulator are designed. The performance analysis for the presented algorithm is given with the simulation results.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.511-520
• /
• 2000

Ultrasonic pulse echo method comes to be difficult to apply to the multi-layered structure with very thin layer, because the echoes from the top and the bottom of the layer are superimposed. We can easily meet this problem when the silicon chip layer in the semiconductor is inspected by a SAM equipment using fairly low frequency lower than 20MHz by which severe attenuation in the epoxy mold compound of packaging material can be overcome. Conventionally, deconvolution technique has been used for the decomposition of superimposed UT signals, however it has disabilities when the waveform of the transmitted signal is distorted according to the propagation. In this paper, the wavelet transform based deconvolution(WTBD) technique is proposed as a new signal processing method that can decompose the superimposed echo signals with superior performances compared to the conventional deconvolution technique. WTBD method uses the wavelet transform in the pre-stage of deconvolution to extract out the common waveform from the transmitted and received signal with distortion. Performances of the proposed method we shown by through computer simulations using model signal with noise and we demonstrated by through experiments for the fabricated semiconductor sample with partial delamination at the top of silicon chip layer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.698-706
• /
• 2017

The risk of high power electromagnetic(HPEM) pulse exposure to the devices used in digital control system such as PLC(programmable logic controller) and communication cable is increasing. In this paper, two different frequency ranges HPEMs were exposed to those control systems to assess the each vulnerability. The vulnerability of the EUTs exposed from HPEM were analyzed and compared with a variation of distances and source power. As the EUTs were exposed to higher level of HPEM, the voltage and communication waveform of the control system had shown a distorted response. And the unshielded twisted pair(UTP) cable connected to the EUTs showed operation failures with induced voltage. However, the foiled twisted pair(FTP) cable shielded the connected device efficiently from the HPEM exposure. Therefore, the necessity of the protection measures against the vulnerability of HPEM exposure for the digital control system used in power facilities and industrial site were verified.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.186-194
• /
• 2000

bottom as a reference basis, some theoretical elements which form bottom echoes during acoustic survey of demersal fish were considered. A stable bottom detection method based on maximum voltage difference, which was not influenced by variable levels and waveform transformation. The method has been shown to be effective using in-situ bottom echo waveforms and computer simulation data. A comparison between near-bottom SV profiles acquired in Funka Bay, Hokkaido, of Japan, the East China Sea and the Yellow Sea, of Korea, with the threshold method and maximum differential voltage method, shows that the SV obtained with the maximum differential voltage method is 4-6 dB higher than those with threshold method within 2m from the bottom.