• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1996

초음파는 액체 및 고체의 매질 속에서도 그 전달 특성이 우수하여 수중 물체의 감지, 지질 조사 자원탐사뿐만 아니라, 의학 분야에서도 널리 사용되고 있다. 물체유동정보 측정방식에는 연속파를 이용한 도플러식과 펄스 신호를 이용한 도플러는 거리 분해능이 좋으므로 깊이에 따른 속도 정보를 쉽게 얻을 수 있는 장점이 있으나, 수신되는 도플러 신호가 탐촉자의 특성과 매질 속에서의 전파특성 등에 의하여 송신된 신호와 파형이 다르고 복잡한 주파수 특성을 가지므로 연속파에서와 같이 도플러 주파수를 직접 측정하기 곤란하다. 도플러 주파수를 검출하기 위하여 여러 방법이 개발되어 있으나, 측정거리와 측정속도의 제약과 더불어, 실시간(real time) 처리에 의한 분포적 측정이 어려운 실정이다. 본 연구에서는 시간 영역에서 국소 데이터를 이용하여 펄스 신호의 위상을 정의하고 실시간에서 펄스 신호를 위상으로 변환하는 신호 처리법을 제안하였다. 또한 이 신호 처리법을 응용하여 측정 범위의 위상 곡선에서 위상 차를 계산함으로써 평균 가속도와 유동속도정보를 분포적으로 얻을 수 있는 새로운 펄스 도플러 기법을 제안하였으며, 모델 신호를 만들어 제안된 방법의 유용성을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.158-165
• /
• 2016

Many researches for improving detection performance in the reverberation environment have been conducted in active sonar systems. Especially the type of active pulse makes an impact on the detection performance in the reverberation environment. Thus, this paper describes the detection performance of PTFM (Pulse Trains of Frequency Modulated waveform), Costas, and Geometric Comb pulses which are known for their outstanding performance against the reverberation. Sea trial data of those pulses was analyzed and it was figured out that the range resolution of PTFM pulse was deteriorated by its sub-pulses. Costas pulse showed performance degradations of the doppler resolution by multipath signals. Geometric Comb pulse showed the best doppler resolution.

• Progress in Medical Physics
• /
• v.5 no.1
• /
• pp.25-39
• /
• 1994

To measure the velocity of heart wall and local flow transctaneously in blood vessels, we have developed a single channel 3.1 MHz pulsed ultrasonic Doppler velocity meter. Ultrasound pluse width and repetition frequency (PRF) used in the velocity meter is 1 ${\mu}$sec 6kHz reapectively, and the Doppler shift of the backscattered echo signal is sensed in a phase detector by coherent demodulation method. From the output of the phase detector, the Doppler signal corresponding to the mean velocity of acoustic wave scatterers over a small region is obtained by using a range gate, sample holder and band-pass filter. Mean frequency of Doppler signal is estimated by zero-crossing counter and the instantaneous velocity of scatters is displayed as a function of time. It is possible to estimate velocity profile, volume flow and flow acceleration of vessels in man if the number of channels and range resolution in increased.

• Journal of Biomedical Engineering Research
• /
• v.10 no.1
• /
• pp.33-42
• /
• 1989

The doppler effect is used for measuring the velocity of the blood flow in artery. Because of the range information, the pulsed doppler system is most commonly used. In this paper, we propose a new two-dimensional(2-D) pulsed Doppler system. Which uses second-order sampling method and serial processing. The proposed system using second-order sampling method eliminates in-phase, quadrature-phase balancing problem at demodulator of quadrature detection method. In addition, the new pulsed 2-D doppler system eliminates balancing problem of channels of 2-D doppler system because of serial processing.

• Journal of Biomedical Engineering Research
• /
• v.7 no.2
• /
• pp.139-146
• /
• 1986

Pulsed ultrasonic Doppler system is a useful diagnostic instrument to measure blood-flow-velocity, velocity profile, and volume-blood-flow. This system is more powerful compare with 2-dimensional B-scan tissue image. A system has been deve- loped and ii being evaluated using TMS 32010 DSP. We use this DSP for the purpose of real-time spectrum analyzer to obtain spectrogram in singlegate pulsed Doppler system and for the serial comb filter to cancel clutter and zero crossing counter to estimate Doppler mean frequency in multigate pulsed Doppler system. The Doppler shift of the backscattered signals is sensed in a phase detector. This Doppler signal corresponds to the mean velocity over a some region in space defined by the ultrasonic beam dimensions, transmitted pulse duration, and transducer ban(iwidth. Multi- gate pulsed Doppler system enable the transcutaneous and simultaneous assessment of the velocities in a number of adjacent sample volumes as a continuous function of time. A multigate pulsed Doppler system processing the information originating from presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1790-1795
• /
• 2013

The current velocity and turbulence information in each range cell can be obtained from the first and second Doppler spectrum moment estimates. However, the very widely used correlation method often called as the pulse-pair method has the inherent restrictions under the highly turbulent conditions since it does not satisfy the assumptions that the return Doppler spectrum should be symmetric and have a single peak value. Therefore, in this paper, the quality of pulse-pair estimates were compared with that of FFT estimates for problem analysis using various shapes of simulated Doppler spectra. It can be known that the pulse-pair method often yields meaningless results if the received signals are severely biased or multi-peak Doppler spectra in the Doppler frequency domain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.784-790
• /
• 2009

A forward-looking automotive radar typically utilizes the frequency modulated continuous wave(FMCW) or pulsed-Doppler waveform for the Information acquisition of the target range and velocity. In order to obtain the high resolution target information, however, a narrow pulse width and wide bandwidth are inherently required, thus resulting in high peak power and high speed digital converter processing. In this paper, a stepped-frequency pulsed-Doppler(SFPD) waveform algorithm is proposed for high resolution forward looking automotive radar application. The performance of the proposed SFPD waveform technique is analyzed and compared with the conventional FMCW and PD method. Since this technique can be used for the high resolution target imaging with arbitrary range and Doppler resolution, it is expected to be useful In automotive radar target classification for the precision collision avoidance applications in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.580-589
• /
• 2012

In this paper, we studied on Doppler gap-filling algorithms suitable for a portable or low-cost medical ultrasound imaging system, and as a result, found out algorithms based on mirroring or autoregressive model. Moreover, controlling the computational demand in the proper range, we improved the performances of these algorithms by solving their problems. Effectiveness of these modified algorithms is verified by computer simulations and experiments which used artificially generated Doppler signals and Doppler data acquired from human body through an actual ultrasound system.

• 전기의세계
• /
• v.34 no.2
• /
• pp.88-93
• /
• 1985

설계된 시스템으로 중요한 동맥과 정맥의 흐름속도를 들을 수 있었으며 스펙트럼 해석기(Spectrum Analyser)를 통과한 출력을 보였다. 게이트의 수를 증가시킨 다중 채널 펄스 도플러 시스템을 사용하므로 혈관 각 부분에서 흐름 단면도(flow profil)와 속도 신호를 (velocity signal)을 얻을 수 있는 가능성을 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1753-1759
• /
• 2009

A weather radar as one of the remote sensing devices to analyze the weather phenomena receives the return echoes which consist of scattered electromagnetic wave signals from rain, cloud and dust particles, etc. These received Doppler weather spectra are analyzed to extract the various characteristic weather information. The mean wind velocity is one of the important weather parameters which can be obtained by a weather radar ed it may be useful in the prevention of weather hazards occurred by the abrupt shift of wind in small geographical scales such as microbursts. It is usually estimated by pulse pair method which is considered to be reliable and very efficient in the computational requirement. However, there are some problems in the accurate estimation of the mean velocity if Doppler spectra of weather signals appear to be asymmetric gaussian or multi-peak spectra. Therefore, in this paper, the problems in the mean estimation of asymmetric Doppler spectra are analyzed and the improved method is suggested.