Journal of the Korean Society for Aeronautical & Space Sciences
/
v.50
no.4
/
pp.269-275
/
2022
In ideal configuration, elapsed-time method can measure the exact reaction wheel speed. But in real configuration, the speed measurement error exists due to tacho pulse non-uniformity. In this research, we study the method which overcome the non-uniformity effects. First, we introduce the method which spin the wheel at the specific speed and measure the non-uniformity. Then, we propose the real-time measurement error correction method which uses the obtained non-uniformity information. This method calculate the speed candidates from the elapsed-time method's counts and non-uniformity information, and choose the closest speed to the real speed. Through simulation, we show that proposed method measure the exact speed regardless of non-uniformity, and fast wheel speed control is possible.
Two conventional speed detection methods (Elapsed-time method and Pulse-count method) are analyzed and compared for a high speed motor with digital tacho pulse with non-uniformity. In general, the elapsed-time method usually has better performance than a pulse-count method in case sufficiently high speed clock is used to measure the time difference. But if a tacho pulse non-uniformity exists in the reaction wheel - most of reaction wheel has a certain amount of non-uniformity - the accuracy of the elapsed-time method is degraded significantly. Thus the performance degradation is analyzed with respect to the level of non-uniformity of tacho pulse distribution and an allowable bound is suggested.
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.563-563
/
2013
신업플라즈마에서는 라디컬 밀도와 플라즈마 변수를 독립적으로 제어하기 위해어 펄스파워 소스를 사용하고 있다. 펄스플라즈마에서는 플라즈마 상태가 매우 빨리 변한다. 따라서 고시간 분해능으로 플라즈마를 진단하는 방법이 필요하다. 고전적인 단일 랑뮤어 탐침법을 이용하여 펄스 플라즈마를 진단할 경우 수시간 정도의 매우 오랜 시간이 걸리지만 본 연구에서 제안한 방법을 이용하면 수 마이크로 초의 고시간 분해능을 가지면서 수 초내로 측정이 가능하다. 기본 원리는 부유고조화파를 이용하며 고시간 분해능으로 얻기 위해서는 측정된 전류를 인가한 주파수의 주기 단위로 분할하고, 마이크로 시간 단위로 분할된 데이터를 각각 Fourier Transform 하여 전자온도와 밀도를 얻는다. 이 방법을 이용하여 구한 플라즈마 변수 값들은 랑뮤어 방법으로 구한 것과 비교하여 잘 일치하는 결과를 얻을 수 있었다.
Journal of the Korean Society of Marine Environment & Safety
/
v.2
no.1
/
pp.1-10
/
1996
초음파는 액체 및 고체의 매질 속에서도 그 전달 특성이 우수하여 수중 물체의 감지, 지질 조사 자원탐사뿐만 아니라, 의학 분야에서도 널리 사용되고 있다. 물체유동정보 측정방식에는 연속파를 이용한 도플러식과 펄스 신호를 이용한 도플러는 거리 분해능이 좋으므로 깊이에 따른 속도 정보를 쉽게 얻을 수 있는 장점이 있으나, 수신되는 도플러 신호가 탐촉자의 특성과 매질 속에서의 전파특성 등에 의하여 송신된 신호와 파형이 다르고 복잡한 주파수 특성을 가지므로 연속파에서와 같이 도플러 주파수를 직접 측정하기 곤란하다. 도플러 주파수를 검출하기 위하여 여러 방법이 개발되어 있으나, 측정거리와 측정속도의 제약과 더불어, 실시간(real time) 처리에 의한 분포적 측정이 어려운 실정이다. 본 연구에서는 시간 영역에서 국소 데이터를 이용하여 펄스 신호의 위상을 정의하고 실시간에서 펄스 신호를 위상으로 변환하는 신호 처리법을 제안하였다. 또한 이 신호 처리법을 응용하여 측정 범위의 위상 곡선에서 위상 차를 계산함으로써 평균 가속도와 유동속도정보를 분포적으로 얻을 수 있는 새로운 펄스 도플러 기법을 제안하였으며, 모델 신호를 만들어 제안된 방법의 유용성을 검토하였다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.195-195
/
2011
플라즈마를 이용한 반도체 이온 주입 공정(Plasma Immersion Ion Implantation)에서 이온 도즈량(DOSE) 측정은 공정 신뢰성 및 재현성 확보를 위해 중요하다. 본 연구에서는 도즈량 측정을 위해 패러데이컵과 같이 측정 장비를 챔버에 직접 삽입 시키지 않고 챔버 외부에서 이온 주입을 위한 바이어스 전극의 직류 펄스 전압 및 전류 신호 측정을 통해 실시간으로 도즈량을 추출하는 방법을 개발하였다. 펄스 전압 신호에서 전압 신호 상승, 하강 시간에 의해 발생된 변위 전류와 플라즈마 발생 소스의 RF잡음등을 제거한 후 이온 포격으로 인한 2차 전자 방출 계수를 고려하여 펄스 동작 기간 추출을 통해 실시간으로 측정하는 알고리즘을 구현하였다.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.10
no.1
/
pp.49-59
/
2011
Recently, ToA and TDoA estimation are favorable among all of estimation techniques because they have the best accuracy in estimating position. ToA and TDoA estimation are typical techniques based on time. So, it is important to have the time syncronization and offset between a target node and several reference nodes. If they don't have the time syncronization between a reference node and target node or have a time offset among reference nodes, the positioning error will increase due to the ranging error. The conventional positioning algorithm does not have a accurate device's position because ranging error is added the calc dation of the position. In this paper, we propose a hybrid method of ToA and TDoA ll increase due. We use MHP pulse that has orthogonal pulse instead of the existing pulse to transmit and receive pulses between a target node and reference nodes. We can estimate the target node's position by ToA and TDoA estimation to transmit and receive MHP pulses only once. When the proposed Hybrid method iteratively calculate the distance, we can select the ranging technique to have more accurate position. The simulation results confirm the enhancement of the Hybrid method.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.40
no.9
/
pp.827-832
/
2012
In this paper, we will design the speed measurement board of LEO Satellite's reaction wheel which has two speed measuring methods as M-Method type and T-Method type. therefore we can use the advantage of two methods. and we will verify the availability of design on the on-board computer at the real LEO Satellite(KOMPSAT-3). In the reaction wheels satellite that can change the satellite's attitude is one of the leading drivers by the rotational inertia of the motor will perform attitude control. Reaction methods for detecting wheel rotation speed generated during a certain period T internal reaction wheel tacho pulse counting M-Method to detect wheel speed and wheel tacho pulses are generated by measuring the time between the detection rate can be divided into T-Method. M-method is simple to implement and benefit measurement time is constant, but slow fall in the velocity measurement accuracy is a disadvantage. In contrast, the time between tacho pulses to measure the T-Method to measure the precise speed at low speed and to measure the time delay is small, has the advantage. However, this method also in the actual implementation and the complexity of the operation at different speeds depending on the speed of operation has the disadvantage.
Journal of the Korea Society of Computer and Information
/
v.18
no.7
/
pp.47-55
/
2013
Most of the applications implemented in embedded systems use timers equipped in MCU. The purposes of timer usage of the applications lie in a wide range of areas such as implementing software timers of real-time operating systems to measuring processing time of sensors. The elapsed times measured by the applications are various in length as well as in precision ranging from several us to several hundreds of ms. The paper analyzes the timing error factors caused by un- synchronizing timer clock pulse when timers are manipulated, and proposes a method of how to synchronize timer clock pulse to reduce the timing errors. As a result of an experiment, this paper shows that an error of 230us is reduced within 10us in case of appling the proposed method to a 4096Hz timer prescaled from 32768Hz by 8.
MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.
Proceedings of the Korean Society of Medical Physics Conference
/
2003.09a
/
pp.79-79
/
2003
심실의 내부는 유두근이나 trabecular와 같은 해부학적 구조물들로 인해 복잡한 형태를 띄고 있다. 그러한 복잡한 구조는 MR 영상을 이용한 심박출량 측정시 오차를 유발시킬 수 있으며, 만약 오차를 줄이기 위해 수작업을 하게 된다면 많은 수고와 시간이 필요하게 될 것이다. 본 연구에서는 threshold 기법을 이용하여 짧은 시간동안에 정확하게 복잡한 구조를 가진 심실의 심박출량을 측정하고자 하였다. 7 명의 환자에 대해 l.5T 급 MR 장치 (INTERA, Philips, Netherlands)를 이용하여 short-axis cardiac MR 영상을 획득하였다. 한 환자에 대해서 8개에서 10개의 슬라이스 영상을 8-10 mm의 두께로, 하나의 심장주기(cardiac cycle)동안 일정한 시간간격으로 25 개의 영상을 획득하였으며, 펄스시퀀스로는 ECG-gated segmented balanced fast field echo (TR/TE = 3ms/1.56ms)를 사용하였다. 획득된 영상은 PC(threshold 기법)와 workstation (기존의 수동 및 자동 segmentation 기법)로 DICOM 형태로 전송되었다. 측정은 IDL을 이용하여 자체 제작된 소프트웨어와 상용화된 소프트웨어 (MASS 5.0, MEDIS, Netherlands)를 이용하여 분석되었다. MR 영상에서 심내벽 부위를 추출하기 위하여 자체제작된 소프트웨어로는 threshold 기법을, 상용 소프트웨어로는 기존의 수동 및 자동 기법을 이용하였다. 심박출량은 최대수축기와 이완기 사이의 용적 차이로써 계산되었으며, 좌심실 및 우심실 모두에 대해 수행되었다. 또한, 해부학적 구조의 복잡도에 따른 측정방법의 정확도를 확인하기 위해 유두근 및 trabecular의 hypertrophy의 정도를 3 단계로 구분하고 측정된 값들을 통계적으로 분석하였다. Hypertrophy가 약한 그룹에서는 기존의 수동방식과 threshold 기법간의 의미있는 차이가 없었으며 (p=0.372), 기존의 수동 및 자동방식 간에도 큰 차이가 없었다 (p=0.298). 그러나, hypertrophy가 심한 그룹에서는 수동방식 및 자동방식 측정치 사이에 통계적으로 유의한 차이를 보임을 알 수 있었다 (p=0.044). 그러나, threshold 기법과 수동방식 사이에는 유의한 차이가 없었다 (p=0.l94). 분석시간은 threshold 기법이 기존의 수동방식에 비해서 두배정도 빠르다는 것을 알 수 있었다, Threshold 기법은 심박출량 측정에 있어서 정확하면서도 빠른 결과의 도출이 가능했으며, 특히 심내벽의 구조가 복잡한 경우에 그 효과가 증대됨을 알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.