• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.171.1-171.1
• /
• 2005

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.337-340
• /
• 2002

부직포의 제조공정은 기본적으로 웹성형공정과 웹결합공정으로 구성되어 있다. 웹성형공정에는 단섬유를 중심으로 건식법과 습식법 및 장섬유를 중심으로 스펀본드법[1]이 있다. 웹결합공정에는 니들펀칭과 접착제, 열응착, 스펀레이스 및 스티치공정 등 여러공정법이 응용되고 있다. 이러한 공정의 선택은 개발목표로 하는 최종제품의 특성과 용도에 의해 결정된다. 일반적으로 동일중량을 기준에서 볼 때, 고강도 고강제조공정상 경량제품에는 주로 열융착방법을 선택하며 중량제품에는 니들펀칭공정을 사용하고 있으며 그 한계는 웹결합공정 특성상 약 150g/$m^2$ 내외이다. (중략)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 추계총회 및 학술발표회 논문집
• /
• pp.234-237
• /
• 1997

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 2005

The shearing and punching processes are analyzed with the finite element method using an isotropic material model. The experimental result in the punching process shows that final radiuses of sheet metal according to the rolling direction and transverse direction are different because of the material anisotropy. The material anisotropy is induced by complicated large deformation in the polycrystalline aggregate. The contact region between the punch and sheet metal experiences severe deformation such as shear, compression and tension in the punching process. In this paper, the analysis of punching process for Al 1100 is performed with the ABAQUS Standard. The analysis of texture development and evolution is carried out based on the deformation history in the punching process. The deformation histories are extracted by UMAT in the ABAQUS Standard. The torture development is investigated with the pole figure and yield surface during the punching process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.159-162
• /
• 2005

The milli-components for electronic and medical device etc. have been manufactured by conventional process. Forming and machining process for those milli-components need tremendous cost and time because products require higher dimensional accuracy than the conventional ones. For instance, conventional mechanical punching process has many drawbacks for applying to high accuracy products. The final radius of hole can be varied and burr which interrupting another procedure is generated. Hydro-mechanical punching process makes possible to reduce amount of burr and obtain the fine shearing surface using the operating fluid. Hydrostatic pressure retards occurrence of initial crack and induces to locate the fracture surface in the middle of sheet to thickness direction. In this paper, Hydro-mechanical punching process is analyzed using finite element method and the effect of hydrostatic pressure is evaluated during punching process. The prediction of fracture is performed adopting the various ductile fracture criteria such as Cockcroft, Brozzo and Oyane's criterion using a user subroutine in ABAQUS explicit.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.184-187
• /
• 2002

Compression molding was specifically developed for replacement of metal components with composites. As the mechanical properties of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding conditions. In this study, the effects of the fiber mat structure(NP: 5, 10, 25punches/$\textrm{cm}^2$) and the mold closure speed($\dot{\textrm{h}}$=0.1, 1, 10mm/min) on the viscosity of composites were discussed. The composites is treated as a Non-Newtonian power-law fluid. The parallel-plate plastometer is used and the viscosity is obtained from the relationship between the compression load and the thickness of the specimen.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.51-57
• /
• 2006

Hydro-mechanical punching was developed for preventing burr formation. Circular hole punching and Finite element method(FEM) analysis were conducted to investigate shearing characteristics of this process in comparison with conventional and mechanical counter punching. In this process hydrostatic pressing with appropriate medium was utilized instead of counter punch, which resulted in the delay of the point that the fracture is initiated and clean shearing surface was obtained. FEM analysis was utilized to find out optimum processing parameters and shearing mechanism for burr-free hole punching.

• 공업화학
• /
• 제20권5호
• /
• pp.561-564
• /
• 2009

화학적 바인더를 사용하여 활성탄을 고정화시킨 필터 여재(filter media)와 바인더를 사용하지 않고 니들펀치 공정으로 제조한 필터여재를 비교해 보았다. 제조된 콤비네이션 필터는 실차의 내용적과 비슷한 크기의 챔버 내부의 차량용 송풍기에 장착하여 가스제거 효과를 평가하여 보았다. 화학적 바인더를 사용한 캐빈에어필터는 바인더에 의해 활성탄의 흡착기공이 막혀 아세트알데히드 제거 효과가 감소하리라는 예측과 반대로 니들펀칭 공정으로 제조한 필터에 비해 아세트알데히드 1 min 및 30 min 제거효율이 더 높게 나타났다. 니들펀칭 공정에 따르면 활성탄의 소수성결합력(hydrophobic interaction)으로 인해 화학적 바인더를 사용한 캐빈에어필터보다 공극면적(void area)이 상대적으로 더 넓은 것으로 나타났다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.63-66
• /
• 2003

The effect of punching density and material composition on the tensile properties and optimum condition of manufacturing of carbon needle punched perform was studies. The interlaminar tensile strength were increased but the intralaminar tensile strength were decreased with increasing punching density. In the case of the performs composed of continuous oxi-PAN fabrics, there was a considerable improvement of the interlaminar and intralaminar tensile strength.

• 소성∙가공
• /
• 제15권3호
• /
• pp.220-225
• /
• 2006

This paper investigates the characteristics of a hydro-mechanical punching process. The hydro-mechanical punching process is divided into two stages: the first stage is the mechanical half piercing in which an upper punch goes down before the initial crack is occurred; the second stage is the hydro punching in which a lower punch goes up until the final fracture is occurred. Ductile fracture criteria such as the Cockcroft, Brozzo and Oyane are adopted to predict the fracture of sheet material. The index values of ductile fracture criteria are calculated with a user material subroutine, VUMAT in the ABAQUS Explicit. The hydrostatic pressure retards the initiation of a crack in the upper region of the blank and induces another crack in the lower region of the blank during the punching process. The final fracture zone is placed at the middle surface of the blank to the thickness direction. The result demonstrates that the hydro-mechanical punching process makes a finer shearing surface than the conventional one as hydrostatic pressure increases.