• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.221-233
• /
• 2021

The purpose of this study is to analyze the effects of determinants of innovation performance on innovation performance in industry-research institute(IR) cooperation for researchers of government-funded research institutes in Daedeok Innopolis. We reviewed the existing literature on the determinants of innovation performance through cooperation, and established a conceptual framework to analyze the combinatorial effect of the determinants of innovation performance on innovation performance in IR cooperation. Data for empirical analysis were collected through a questionnaire survey targeting researchers at a government-funded research institute in Daedeok Innopolis. The fuzzy-set qualitative comparative analysis (fsQCA) was used to analyze the combined effect of determinants of innovation performance. The fsQCA results show that the configuration of high motivation, high trust, high commitment and high satisfaction of researchers of government-funded research institutes improve innovation performance. On the other hand, it shows that the configuration of high motivation, high trust, low commitment and low satisfaction of the researcher improves innovation performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.2
• /
• pp.167-175
• /
• 1971

A pot experiment with an acid sulfate soil from Kimhae was carried out to find out the cause of toxicity in rice plant. The effect of liming on changes in pH, Eh, Al, and $Fe^{2+}$ in soil and leachate was examined at two-week interval during the growth of rice. Also, total $P_2O_5$, $SiO_2$, Fe and Al contents in plants at harvesting stage were determined. In the early stage, the rice plant in the check soil showed the same healthy growth as did in limed soil even at high Al in soil and leachate. Around panicle forming stage, reddish brown mottlings suddenly infested all over the plants when accompanied with strong reduction, and afterward growth was severely retarded, and finally caused the significant difference in yield. During the strong reduction, significant amount of sulfide was formed only in check soils, but no free $H_2S$ was detected. Appreciable Al was still present in soil and leachate, and $Fe^{2+}$ in check soil was lower than that in limed soil, but $Fe^{2+}$ in leachate was slightly higher. Limed soils were more reduced and produced more $Fe^{2+}$ due to increased microorganism activity in the neutral pH. In the leachate, the check showed slightly higher $Fe^{2+}$ concentration but considerably higher than limed one at later stage. Appreciable amount of Al was detected only in check soil and leachate from transplanting to panicle formation stage. Plant tissues at harvesting stage contained very low P regardless of liming. Uptake of Si was markedly increased by liming. Contents of Fe an Al was markedly higher in check than limed one, but difference in Fe content was more drastic possibly due to more Fe uptake in presence of markedly higher $Fe^{2+}$ in soil and leachate at later growing stage. In conclusion toxic symptom in this acid sulfate soil seems to be primarily due to Al when accompanied with low pH and strong reduction. But association with $Fe^{2+}$ toxicity is not completely excluded. In order to differentiate the effect of $Fe^{2+}$ from that of Al more detailed plant analysis at different stage is required.

• Journal of Integrative Natural Science
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2021

On November 17, 2019, an infectious disease with symptoms of pneumonia, called the Wuhan virus at the time, occurred in Wuhan, China. Since then, the name has been changed to COVID-19, and the virus has spread all over the world, and the WHO has declared the highest warning level for infectious diseases, "Pandemic". The coronavirus has also caused great confusion in South Korea. This resulted in large infected people.The first confirmed cases occurred on January 20, 2020, and the number of infected patients is steadily increasing after experiencing several waves, and many corona confirmed cases are also occurring in 2021 after the year. As the whole world enters a pandemic, walls are created between people and people, companies and businesses, and countries and countries, and all growth stops or declines, including human relationships, domestic companies and industries, and foreign industries. As a result, society in general is experiencing a lot of stagnation. Among them, small and medium-sized enterprises (SMEs), which are the basis of all growth in Korea, and youth who are trying to contribute to the national development by entering society, are struggling to find jobs. Even before the coronavirus outbreak, the difficulty of job hunting and the prospect of small and medium-sized businesses were not very good. In this situation, as the country's overall economic situation is poor, the vitality of SMEs has decreased a lot, the prospects are not good, so jobs are reduced, and there are many difficulties due to reluctance to hire new employees. In this study, with 2019 before the corona era and 2020 after the corona era, we compare SMEs before and after the corona era and overall job search and job search activities through average difference analysis, and whether they are affecting through correlation analysis. Through this, it suggests a direction to increase job search through corporate and government policies after raising the prospects of SMEs first.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.6
• /
• pp.50-57
• /
• 2007

Pressure Sensitive Paint(PSP) means a reacting paint in pressure. PSP can measure continuous pressure field by analyzing the oxygen quantity using optical method. The surface pressure of down stream after the sonic jet that injected transversely into the supersonic freestream was measured by PSP technique. Moreover the effect of various rectangular shaped cavities in front of the jet was measured by PSP technique. A comparison of the PSP results with conventional pressure tap and CFD indicates good agreement. Until now, the results of numerical analysis were compared with the discrete points such as the results of pressure tap. In this study, the whole region pressure was measured using PSP technique and its results were similar to CFD. Therefore, the flow phenonenon of cavity downstream was clearly grasped.

• Journal of Sensor Science and Technology
• /
• v.6 no.1
• /
• pp.6-15
• /
• 1997

This paper presents the multi-objective optimal design of thermopile sensor having beam or membrane structure. The thermopile sensor is composed of $Si_{3}N_{4}/SiO_{2}$ dielectric membrane, Al-polysilicon thermocouples and $RuO_{2}$ thin film for black body. The sensing method is based on the Seebeck effect which is originated from the temperature difference of the two positions, black body and silicon rim. The objective functions of the presented design are sensitivity, detectivity and thermal time constant. The modelling of the sensor is proposed including the package. The multi-objective optimization technique is applied to the design of the sensor not only inspecting the modelling equation but also simulating mathematical programming method. Especially, fuzzy optimization technique is adapted to get the optimal solution which enables the designer to reach the more practical solution. The design constraint of the voltage output originated from the change of the environmental temperature is included for practical use.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1905-1912
• /
• 2009

Clustering results based on the FCM algorithm sometimes produces undesirable clustering result through data distribution in the clustered space because data is classified by comparison with membership degree which is calculated by the Euclidean distance between input vectors and clusters. Symmetrical measurement of clusters and fuzzy theory are applied to the classification to tackle this problem. The enhanced FCM algorithm has a low impact with the variation of changing distance about each cluster, middle of cluster and cluster formation. Improved hybrid network of applying FCM algorithm is proposed to classify patterns effectively. The proposed enhanced FCM algorithm is applied to the learning structure between input and middle layers, and normalized delta learning rule is applied in learning stage between middle and output layers in the hybrid network. The proposed algorithms compared with FCM-based RBF network using Max_Min neural network, FMC-based RBF network and HCM-based RBF network to evaluate learning and recognition performances in the two-dimensional coordinated data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.213-218
• /
• 2011

In this paper, we have developed a tongue diagnosis system using fuzzy rules. A healthy person's tongue is red in color and has less tongue coating. However, when a person suffers from a disease, the color of their tongue changes from red to white, blue, or black. Therefore, it can analyze patient's health if analyze color and coated tongue of tongue. Medical diagnosis system can automatically determines the symptoms of the disease of a patient and their and calculate the optimal acupuncture time on the basis of the patient's physical conditions, illness conditions, and age from any place and at any time. The computer simulation results have shown that electro-acupuncture administered by using the medical diagnosis system developed in this study is more effective than the conventional method.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.163-167
• /
• 2008

This paper presents the analysis of tactile effects on different body parts according to the various vibration patterns. The experiments use a vibration pad made of 16 vibration elements in the form of $4{\times}4$ array. The vibration elements are controlled by a 8-bit microprocessor. The sound of gunshot initiates a vibration pattern on different body parts and its sensitivity is measured. The analysis of the experiments lead us to conclude that the vibration pad is the most realistic interface for shooting games and the shoulder part is the most sensitive part in the body. In addition, the most effective vibration pattern is the for the pattern which gives the sensation of spreading out from the center to the outside. This study analyzes the relationship between the human body parts and the tactile sensations by the various vibration patterns. The result of this study will be a good reference for user studies in the field of haptics based on the vibration.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.343-348
• /
• 2007

In this study, terpolymer of vinylidene fluoride (VDF), trifluoroethylene (TrFE), and chlorotrifluoroethylene (CTFE) were prepared by suspension polymerization using di-tertiary-butyl peroxide (DTBP) as an initiator. The structural characteristics including microstructure and chain conformation of the polymers have been carefully elucidated as a function of the chemical composition using NMR, FT-IR. The intensity of absorption bands of the $\beta$-phase gradually decreases and the $\gamma$-phase increases with the increment of CTFE mol%. The analysis results of DSC shows that the Curie phase transition temperature ($T_c$) of the terpolymer gradually shifts to ambient temperature and trace becomes smaller and broader with the increment of CTFE mol%. Also, activation energies of the samples were calculated by Freeman-Carroll method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.55-61
• /
• 2009

This paper proposes a position estimation of a mobile robot based on USN(Ubiquitous Sensor Network) and encoder, and development of tele-operation system using Internet. USN used in experiments is based on ZigBee protocol and has location estimation engine which uses RSSI signal to estimate distance between nodes. By distortion the estimated distance using RSSI is not correct, compensation method is needed. We obtained fuzzy model to calculate more accurate distance between nodes and use encoder which is built in robot to estimate accurate position of robot. Based on proposed position estimation method, tele-operation system was developed. We show by experiment that proposed method is more appropriate for estimation of position and remote navigation of mobile robot through Internet.