• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.57-66
• /
• 2006

In this study, the centrifuge model tests were carried out to evaluate the stress concentration ratio, the deformation modes of piles and the ground movement in clay deposit improved by SCP and GCP piles with changing the replacement ratio(20%, 40%, 60%) under flexible loading. Based on the results obtained, it was shown that the stresses acting on GCP was larger than those acting on SCP with the same replacement ratio. It was evaluated that the average stress concentration ratio of soft clay ground improved by GCP was slightly larger than that of SCP when the replacement ratio is 40%. Only expansion failure occurred in GCP, whereas SCP showed the expansion and shear failure simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.701-711
• /
• 1994

In this paper, we design wavelet matched filters using Wavelet Transform available in the field of time-frequency analysis, for the optical patter recognition, and study optical correlation properites according to variations of the dilation factor of wavelet functions, which were compared with conventional matched filter and POF. We have found that the wavelet matched filters depend upon the shapes if used input patterns and dilation factors of the wavelet function in order to have the best dicriminability. Also, we show the edge enhanced effects of 2-D image, which is one of the properities of the wavelet transform. If has been found that the wavelet matched filter can discriminate better than the conventional matched filter and POF owing to their bandpass properties, and found that the proposed wavelet matched filters have more sensitive correlation response than POF.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.753-764
• /
• 1992

The steam generator water level is difficult to control at low power due to its reversed responses to the feedwater flow, which are well known as the shrink and swell phenomena. With regard to this problem a new control scheme has been studied by which the level transients could be kept within permissible ranges at low power. The relations between the various input conditions to steam generator and the level transients have been examined to be expressed in the form of process transfer functions. Analog filters have been incorporated to be expressed in the process with proper control constants. This control scheme allows the prediction of level variation together with the corresponding feedwater rate and results in mider transients with good stabilites.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.85-91
• /
• 2005

This paper investigates P-S (load-settlement) relationship for the end-bearing Pile in granular material using the CRISP FE Program with the laboratory 2D model pile load test. In order to simulate the effect of end-bearing pile problem in the FEA, the author adopts several forms of slip element around the pile length and the pile tip. Through this study it was found that e degree of non-associated Plastic flow rule incoporated into the Mohr-Coulomb model for the end-bearing pile with the slip elements was a dominant factor in terms of numerical solution convergence. In contrast, the roller boundary used along the pile shaft showed a smooth convergence with respect to the degree of non-associated plastic flow rule.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.492-500
• /
• 2002

Oxidized-polyacrylonitrile (oxy-PAN) was prepared by oxidation of PAN fiber at $240^{\circ}C$, followed by base catalyzed hydrolysis reaction. The chemical structure of PAN fiber in various pH conditions was characterized by $^{13}C-NMR$ spectroscopy. The characteristic contraction and expansion behavior of oxy -PAN fiber was observed in acidic and basic medium, respectively. In basic condition, water molecules might be absorbed into the fiber with the movement of charge balancing $Na^+$ ion, on the other hand, the water molecules seemed to be expelled in acidic condition to result in contraction. It was also observed that the facile chemical modification occurred due to free diffusion of aqueous reagent into the hydrophilic PAN fiber, and the morphology was affected by pH condition.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.678-681
• /
• 2010

In the present work, a numerical study is conducted to investigate the effect of the transient nozzle pressure ratio (NPR) on the flow fields inside the nozzle. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST $k-{\omega}$ turbulence model are solved using a fully implicit finite volume scheme. In order to simulate the start-up and shut-down processes of the engine, NPR is varied from 2.0 to 10.0. It is observed that the interaction patterns and the hysteresis phenomenon strongly depend on the time variation of NPR, leading to significantly different characteristics in the lateral forces.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.304-308
• /
• 2012

This paper presents a numerical investigation on propagation of hydrocarbon (ethylene-air mixture) detonation in a deformable copper tube. In this study, we deal with interactions of multi-materials, gas and solid. In gas phase, the model consists of the reactive compressible Navier-Stokes equations and one step chemical reaction. Also we use Inviscid Euler equations in solid. In order to the interface tracking and the determination of boundary values, our model handle level-set and ghost fluid method. Through the numerical simulation results, we identify generations of expansion waves and interferences by the wall deformation. In addition, we predict the minimum copper tube thickness that ensures safety under an incident detonation.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.21-30
• /
• 2006

In this study, centrifuge model tests were performed to investigate the stress concentration ratio, bearing capacity and deformation modes of piles in clay ground improved by granular piles with two types of pile (CSCP, SCP) and various replacement ratios (0, 20, 40, 60%). According to the results of tests, the load ratio of ground improved by SCP and CSCP proportionally increased as replacement ratio increased. It shows that average normalized load of ground improved by CSCP is higher by about $8{\sim}21%$ than by SCP. As a result of rigid loading tests, it was evaluated that average stress concentration ratio of CSCP is higher than that of SCP. Only expansion failure occurred in CSCP, whereas SCP showed the expansion and shear failure simultaneously.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.79-79
• /
• 2022

수치표고모형(digital elevation model)으로부터 추출한 하천망이 실제를 제대로 대변하기 위해서는 정확한 하천시점을 지정하는 것이 필요하다. 그러나, 아직까지 범용적으로 활용할 수 있는 하천시점 결정 방법은 개발되지 못한 실정이다. 하천시점의 결정 방법에 관한 연구가 미비한 근본적인 이유는 실측을 통한 하천시점 자료가 매우 부족하기 때문이다. 또한 하천시점의 위치를 조사하였더라도 하천시점은 시간에 따라 변화할 수 있기 때문에 일회성 하천답사로 하천시점의 위치를 단정할 수 없다. 이 연구는 실측을 통해 하천시점 결정요인에 대하여 이해를 구하는 것을 목표로 한다. 무갑천을 대상으로 하여 네 차례(2월, 4월, 5월, 8월) 현장답사를 수행하여 하천시점 위치를 파악하였다. 하천시점의 개수와 위치가 변화하는 것을 관찰하였고, 2월부터 5월까지 하천시점은 상류로 팽창하는 양상을 보이다 8월에 하류방향으로 수축하는 형태를 나타냈다. 이러한 거동의 원인으로는 2월부터 5월까지유역 내 식생 발달이 비교적 적고 강수량이 증가하여 하천시점이 팽창된 것으로 파악되었며, 8월에는 강수량이 이전의 조사기간 보다 증가하였으나 식생이 활발히 발달하여 하천시점이 수축된 것으로 파악되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.383-383
• /
• 2012

최근 나노 소재의 활용 가능성이 확대되어감에 따라 다양한 소재의 나노구조체에 대한 연구가 진행되어 왔다. 그 중 은(Silver)은 열전도율과 전기전도율이 가장 우수한 금속으로 다양한 형태의 은 나노 입자를 형성할 수 있고. 이를 탄소, 비석, 고분자 등의 기판에 다양한 방법으로 성장시키는 연구가 진행되었다. 기판으로 사용되는 재료 중 탄소 복합소재는 내열성, 화학적 안정성, 열전도성, 저열팽창성에 따른 치수 안정성, 유연성 등의 우수한 특징을 지니고 있으며 최근까지 방열 소재로서 활용되고 있다. 본 연구에서는 탄소섬유의 표면에 다양한 결정 구조를 가지는 Ag seed 입자를 형성하고 폴리올 공정을 통하여 와이어 형태의 나노구조체를 성장시켜 그 형상제어 특성을 FE-SEM을 통하여 확인하였다.