• Archives of design research
• /
• v.17 no.1
• /
• pp.373-382
• /
• 2004

Large sized buildings have proliferated in the modern world in order to solve problems caused by the growth of cities, and this trend has lead to diversity in style and utilization of interiors. In particular, wayfinding within the shopping mall for a customer is a common problem, so if customers do not have to face these navigational problems and could find the way more easily, then shopping mall or the store can expect much better profits. Therefore, directional sign system that can provide accurate and speedy information for customers with diversified ages, gender and knowledge is necessary. Firstly, the definition and element of all directional sign are analyzed through the existing literature survey. The elements are based on the practical elements and six categories such as type, pictogram, color, layout, form, and location were considered. Secondly, directional signs in large underground shopping mall was considered, and the speciality of the underground shopping mall was investigated, and finally top three underground shopping malls was analyzed. Thirdly, through the questionnaire, an objective appraisal of directional signs and problems was developed, and following possible improvement was suggested. This study has its own limitations since it is only applicable to the specific locations, however, directional designs will be useful in other types of buildings as well. Through the continuous studies of the users' psychology, these kinds of studies will be related to the environmental characteristics of various places.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.637-643
• /
• 2010

We investigated the characteristics of breads containing Schizandra chinensis Baillon (SCB) added as whole powder, as a powder prepared from juice, and as a concentrate prepared from a 95% (v/v) ethanolic fruit extract, added to wheat flour at 0.5% (w/w). Addition of any form of SCB lowered the pH and increased the titratable acidity in both doughs and breads compared with control values, and the whole and juice powders were more effective in this respect than was the concentrated ethanolic extract. Dough volume during fermentation was increased by addition of whole powder and concentrated ethanolic extract, but no baking loss was evident upon addition of any form of SCB. Regarding the bread surface, the lightness (L) value was increased by addition of juice powder and concentrated ethanolic extract, but neither the redness(a) and nor the yellowness (b) values showed such increases. Internal color measurements showed increased '-a-' value upon addition of any form of SCB, and increased '-b-' value when concentrated ethanolic extract was used, however, there were no significant changes in L value. Sensory evaluation of taste, flavor, color, and overall acceptability showed that bread prepared using whole powder was more acceptable than were the other forms.

• Journal of Life Science
• /
• v.31 no.7
• /
• pp.631-640
• /
• 2021

Houttuynia cordata Thunberg has been studied for a variety of pharmacological actions in traditional oriental medicine. In this study, we investigated the effects of Houttuynia cordata ethanol extract (HCE) on benign prostatic hyperplasia (BPH) models induced by castration and testosterone propionate (TP) injection. Thirty rats were divided into six groups. One group was used as a normal control, and the other groups were castrated and had intraperitoneal injections of TP for 14 days to induce BPH. A positive control group was given daily doses of finasteride (5 mg/kg) to the BPH model. Rats administered HCE (0.5, 1 or 2 mg/kg) instead of finasteride were compared with controls as experimental groups. There was no statistical significance in terms of prostate weight based on 100 g of body weight. The concentrations of 5-α reductase and dehydroxytestosteronre (DHT) were determined via ELISA tests, and there was a significant decrease in all experimental groups. The 0.5 mg/kg HCE group had the lowest level of 5-α reductase, and the 2 mg/kg HCE group had the lowest level of DHT. In the histopathological observation of prostates, the control and the 2 mg/kg HCE groups had normal cell shapes and no swelling. However, in the negative control group and the 1 mg/kg HCE group, the cells were swollen, and the gap between the cells was narrowed. In particular, in the 0.5 mg/kg HCE group, some cells were bursting. Therefore, the administration of more than 2 mg/kg of HCE is suitable to protect against BPH.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.224-229
• /
• 2018

Korea is experiencing a rapid increase in electricity consumption due to rapid economic development, and many power transmission towers are installed to provide smooth power supply. The high-voltage transmission line is mainly made of aluminum stranded wire, and the wire is loosely guided so that some deflection is maintained. The degree of deflection has a great influence on the quality of the construction and the life of the cable. As the time passes, the shrinkage and expansion occur repeatedly due to the weight of the cable and the surrounding environment. Therefore, periodic monitoring is essential for the management of the power transmission line. In this study, the power transmission lines were monitored using 3D laser scanning technology. The data of the power transmission line of the study area was acquired and the point cloud type 3D geospatial information of the transmission line was extracted through data processing. The length of the transmission line and deflection amount were calculated using the 3D geospatial information of the transmission line, and the distance from the surrounding obstacles could be calculated effectively. The result of study shows the utilization of 3D laser scanning technology for transmission line management. Future research will contribute to the efficiency of transmission line management if a transmission line monitoring system using 3D laser scanning technology is developed.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.115-125
• /
• 2020

Housing issues such as mushrooming slums remain as chronic in most developing countries. Due to the state's restrained capacity, the housing-vulnerable's self-help approaches have been increasingly inevitable and vital for addressing the housing issues. However, there are still two challenges: securing good quality with economic efficiency, and climate change mitigation and adaptation. This study aims at doing an architectural experiment by developing and educating the production of eco-friendly interlocking stabilized soil bricks (ISSB) by employing vernacular materials and technologies for housing-vulnerable communities in Indonesia. In collaboration with a local architectural NGO, the study features a co-creation workshop in which 40 evicted households participate in the whole process. Soil analysis, mixed design, compression tests, and economic analysis are carried out. This paper illustrates that ISSB also has a high potential as an alternative to a burned brick or a cement block. The application of ISSB to self-help housing is expected to have socioeconomic and environmental effects, thereby facilitating the housing-vulnerable's self-help approaches and contributing to addressing the housing challenges in Indonesia.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.6
• /
• pp.5-19
• /
• 2010

The purpose of this study is to figure out the effect of pressurized grouting on the pullout resistance and the group effect of the compression ground anchor by performing pilot-scale chamber tests and field tests. The laboratory tests are carried out for 3-types of soils which are abundant in the Korean peninsular. Experimental results showed that the enlargement of anchor diameters estimated from the cavity expansion theory matches reasonable well with that obtained from experiments. Moreover, the required injection time as a function of the coefficient of permeability of each soil type was proposed. A series of in-situ anchor pullout tests were also performed to experimentally figure out the effect of pressurized grouting on the pullout resistance. Experimental results also showed that the effect of the pressurized grouting is more prominent in a softer ground with smaller SPT-N value in all of the following three aspects: increase in anchor diameter; pullout resistance; and surface roughness. The pressurized grouting effect in comparison with gravitational grouting was found to be almost nil if the SPT-N value is more than 50. Based on experimental results, a new equation to estimate the pullout resistance as a function of the SPT-N value was proposed. And based on in-situ group anchor pullout tests results, a new group effect equation was proposed which might be applicable to decomposed residual soils which are abundant in the Korean peninsular.

• Journal of Adhesion and Interface
• /
• v.25 no.1
• /
• pp.169-274
• /
• 2024

Recent attention has been drawn to materials that undergo reversible expansion and contraction in response to external stimuli, leading to morphological changes. These materials hold potential applications in various fields including soft robotics, sensors, and artificial muscles. In this study, a novel material capable of responding to high temperatures for protection or encapsulation is proposed. To achieve this, liquid crystal elastomer (LCE) with nematic-isotropic transition properties and polyimide (PI) with high mechanical strength and thermal stability were utilized. To utilize a solution process, a dope solution was synthesized and introduced into micro-printing techniques to develop a two-dimensional pattern of LCE/PI bilayer structures with sub-millimeter widths. The honeycomb-patterned LCE/PI bilayer mesh combined the mechanical strength of PI with the high-temperature contraction behavior of LCE, and selective printing of LCE facilitated deformation in desired directions at high temperatures. Consequently, the functionality of selectively and reversibly encapsulating specific high-temperature materials was achieved. This study suggests potential applications in various actuator fields where functionalities can be implemented across different temperature ranges without the need for electrical energy input, contingent upon molecular changes in LCE.

• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.117-121
• /
• 2005

Immature embryos of 3 cultivars (Du Me Chal, Mi Baek Chal, Heug Jeom Chal) and 5 genotypes (HW1, KL103, HW3, HW4, KW7) were cultured on medium containing MS salts, Eriksson's vitamins, 1 mg/L 2,4-dichlorophenoxyacetic acid, 25 mM proline, 100 mg/L casamino acid, 3 mM MES, 1.7 mg/L $AgNO_3$ and 20 g/L sucrose (SIM). Frequency of somatic embryo formation on explant of immature embryos showed in HW1 (45.20%), KL103 (5.75%), HW3 (37.20%), HW4 (30.10%), KW70 (55.20%), Mi Baek Chal (18.74%), Heug Jeom Chal (22.41%), Du Me Chal (36.72%) and Hi II type (<10%), respectively. Yellowish friable embryogenic callus (YFEC) such as type II callus of Hi II genotype only produced from the HW3 and Heug Jeom Chal, whereas other cultivars and genotypes were directly formed somatic embryos with late-embryonic stages or expanded yellowish compact somatic embryo with morphological abnormality. The yellowish friable embryogenic callus (YFEC) could be proliferated on the same medium, which were maintained embryogenic capacity for 6 months over. Upon transfer to first regeneration and second regeneration medium, somatic embryos converted to plantlets at a frequency of approximately 100%. However, the expanded somatic embryos with abnormal morphology were slowly proliferated when subcultured on the same medium, and some of them were degenerated or converted to plantlets at a frequency of approximately 25%. Accordingly, The Heug Jeom Chal and HW3 genotype will be further used for development of high frequency transformation system in domestic maize germplasm.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.167-183
• /
• 2023

Gases originated from the final SNF (spent nuclear fuel) disposal site are very mobile in the barrier and they may also affect the migration of radioactive nuclides generated from the SNF. Mechanisms of gas-nuclide migration in the multi-barrier and their influences on the safety of the disposal site should be understood before the construction of the final SNF disposal site. However, researches related to gas-nuclide coupled movement in the multi-barrier medium have been very little both at home and abroad. In this study, properties of gas generation and migration in the SNF disposal environment were reviewed through previous researches and their main mechanisms were summarized on the hydrogeological evolution stage of the SNF disposal site. Gas generation in the SNF disposal site was categorized into five origins such as the continuous nuclear fission of the SNS, the Cu-canister corrosion, the oxidation-reduction reaction, the microbial activity, and the inflow from the natural barriers. Migration scenarios of gas in porous medium of the multi-barrier in the SNF repository site were investigated through reviews for previous studies and several gas migration types including ① the free gas phase flow including visco-capillary two-phase flow, ② the advection and diffusion of dissolved gas in pore water, ③ dilatant two-phase flow, and ④ tensile fracture flow, were presented. Reviewed results in this study can support information to design the further research for the gas-nuclide migration in the repository site and to evaluate the safety of the Korean SNF disposal site in view points of gas migration in the multi-barrier.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.231-240
• /
• 2017

Recently, there have been frequent occurrences of ground sink in the urban area, which have resulted in human and material damage and are accompanied by economic losses. This is caused by artificial factors such as soil loss, poor compaction, horizontal excavation due to the breakage of the aged sewage pipe, and lack of water proof at vertical excavation. The ground sink can be prevented by preliminary restoration and reinforcement through exploration, but it can be considered that it is not suitable for urgent restoration by the existing method. In this study, a model experiment was carried out to simulate the in-ground cavities caused by groundwater flow for developing non-excavation urgent restoration in underground cavity and the range of the relaxation zone was estimated by detecting the around the cavity using a relaxation zone detector. In addition, disturbance region and relaxation region were separated by injecting gypsum into cavity formed in simulated ground. The shape of the underground cavity due to the groundwater flow was similar to that of the failure mode III formed in the dense relative density ground due to water pipe breakage in the previous study. It was confirmed that the relaxed region detected using the relaxation zone detector is formed in an arch shape in the cavity top. The length ratio of the relaxation region to the disturbance region in the upper part of the cavity center is 2: 1, and it can be distinguished by the difference in the decrease of the shear resistance against the external force. In other words, it was confirmed that the secondary damage should not occur in consideration of the expandability of the material used as the injecting material in the pre-repair and reinforcement, and various ground deformation states will be additionally performed through additional experiments.