• Journal of the Korean Wood Science and Technology
• /
• v.13 no.4
• /
• pp.3-57
• /
• 1985

This research was conducted to examine the feasibility of developing fire retardant particleboard and complyboard. Particleboard were manufactured using meranti particle(Shorea spp.)made with Pallmann chipper, and complyboard meranti particle and apitong veneer (Dipterocarpus spp.). Particles were passed through 4mm (6 mesh) and retained on 1mm (25 mesh). Urea formaldehyde resin was added 10 percent on ovendry weight of particle. Face veneer for complyboard was 0.9, 1.6 and 2.3mm in thickness and spread with 36 g/(30.48 cm)$^2$ glue on one side. Veneers were soaked with 10 percent solution of five fire retardant chemicals (diammonium phosphate, ammonium sulfate, monoammonium phosphate, Pyresote and Minalith), and particles with 5, 10, 15 and 20 percent solution of five chemicals. Particleboard and complyboard were evaluated on physical and mechanical properties, and fire retardancy. The results obtained were summarized as follows. 1. Among five fire retardant chemicals treated to particleboard and complyboard, the retention of ammonium sulfate in 5 percent solution showed the lowest as 1.39 kg/(30.48 cm)$^3$ exceeding the minimum retention of 1.125 kg/(30.48 cm)$^3$ recommended by Forest Products Laboratory and Koch. 2. Particleboard and complyboard treated with diammonium phosphate showed higher modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength and screw holding power than those with the other chemicals. 3. MOR and MOE of complyboard treated with fire retardant chemicals were greater than those of fire retardant particleboard. 4. Thickness swelling of fire retardant complyboard was lower than that of fire retardant particleboard. 5. The moisture content of the boards treated with Pyresote and Minalith increased and with monoammonium phosphate reduced. 6. Fire retardant particleboard showed no ignition, and fire retardant complyboard started ignition, but time required to ignite was prolonged comparing the controlboard. Complyboard with only shell veneer treated showed ignition and lingering flame, but lingering flame time was shorter than controlboard. Complyboard with treated both core and veneer showed ignition but not lingering flame. 7. Flame length, carbonized area and weight loss were smaller than controlboard but had no significant difference among chemicals treated. 8. Temperature of unexposed surface of fire retardant particleboard was lowered with the increasing concentration of five chemicals. 9. Temperature of unexposed surface of fire retardant particleboard was lowered with the highest in Pyresote and the lowest in Minalith. 10. Temperature of unexposed surface of fire retardant complyboard was lower than that of controlboard.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2012

The Baegdusan volcano is one of the most active volcanoes in northeastern Asia, and the 10th century eruption was the most voluminous eruption in the world in recent 2,000 years. During the period from 2002 to 2005, volcanic earthquakes and abnormal surface distortions by suspected subsurface magma intrusion beneath the volcano were observed in the Baegdusan area. Seismic activity has gradually increased with earthquake swarms during 2002-2003 and hundreds of seismic event in a day, especially annual peak of 2,100 in 2003. Then the number of seismic activity has declined since 2006 to the background level in 1999-2001. According to the typical frequency of volcanic earthquakes in the Baegdusan volcano, the frequency distribution of typical volcanic earthquakes between 2002 and 2005 indicates that all the main frequency of the earthquakes basically falls down less than 5 Hz and 5-10 Hz. These events are all the VT-B and LP events caused by the shallow localized fracture and intrusion of magma. The horizontal displacement measurement by GPS during the period from 2000 to 2007 of the Baegdusan stratovolcano area indicates that an inflated process has been centered at the summit caldera since 2002. The displacement between 2002 and 2003 reached at a maximum value of 4 cm. After 2003, the deformation rate of the volcano continued to decrease with unusual variation during the period from 2006 to 2007. After 2003 the vertical displacement uplift rate falls down gradually but still keeps in an uplift trend in northern slope. It is generally believed that when $^3He/^4He(R)$ in a gas sample from a hot spring exceeds $^3He/^4He(R)$ in the atmosphere, it can be concluded that mantle-source. And temperatures of hot springs are rising steadily to $83^{\circ}C$. It is unrest signals at the Baegdusan, which is potentially active. The Baegdusan volcano is now in unrest status, there is eruption threat in the near future. Intensified monitoring and emergency response plan for volcanic risk mitigation are urgent for the volcano.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.21-44
• /
• 1988

As a way for the effective utilization of pallman chips and sawdusts, these furnish materials were combined with non-woody material of plastic (polypropylene) screen in board manufacturing to improve their weak physical and mechanical properties. The conventional boards were made with conditions of specific gravity 0.40, 0.55, 0.70, and 0.85, resin content 8, 10, 12 and 14%, and number of polypropylene screen 1, 2, 3 and 4, and press-lam boards were also manufactured. The physical and mechanical properties were measured and discussed on thickness swelling, bending modulus of rupture and elasticity, tensile strength, internal bond strength, and screw holding strength. The results obtained at this study were summarized as follows: 1. In thinckness swelling both of pallman chip board and sawdust board were improved by the increase of resin content, and press-lam boards showed lower thickness swelling than conventional boards. 2. Both the modulus of rupture and elasticity were increased with the increase of specific gravity, and press-lam boards showed higher modulus of rupture and elasticity than conventional boards. On the other hand, modulus of rupture was increased with the increase of number of polypropylene screen and resin content whereas these effects in modulus of elasticity was not recognized. 3. Tensile strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen showed higher tensile strength than control boards. Also tensile strength was increased with the increase of number of polypropylene screen, and press-lam boards revealed higher tensile strength than conventional boards. 4. Internal bond strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen were lower in internal bond strength than control boards. Also, the boards combined with odd number of polypropylene screen showed lower internal bond strength than those combined with even number of polypropylene screen. 5. Screw holding strength was increased with the increase of resin content and specific gravity but significant difference was not approved between boards combined with polypropylene screen and control boards. In press-lam boards, pallman chip boards of higher specific gravity but sawdust boards of lower specific gravity showed better screw holding strength than control boards.

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.463-472
• /
• 2019

This study investigated the quality characteristics and antioxidant activities of morning bread containing various amounts of aronia sourdough starter. Morning breads were prepared with different volumes (0% (AS0), 15% (AS1), 25% (AS2), and 35% (AS3)) of aronia sourdough starter based on wheat flour. In AS3 group (35% added group), the specific volume and baking loss rate were the highest but the bread height was the lowest. When the aronia sourdough starter was added up to 25%, the expansion power, specific volume, and bread height were significantly increased (P<0.05). According to the added amount of sourdough starters, the lightness and yellowness of the morning bread were decreased, however, redness was increased (P<0.05). In the rheology analysis, hardness, gumminess, and chewiness were significantly decreased with increasing amounts of aronia sourdough starters (P<0.05). However, cohesiveness was the highest in the AS2 group (25% added group). In consumer preference, the highest scores were shown in AS2 group (25% added group) in color, texture, and appearance. The total polyphenol and DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging ability were both significantly increased along with aronia sourdough content (P<0.05). In conclusion, morning bread with 25% aronia sourdough starter showed the best quality characteristics and antioxidant activities.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.117-124
• /
• 2017

In this study, to evaluate the setting time, compressive strength and drying shrinkage of ordinary Portland cement and Portland blast-furnace slag cement mortar with 0, 10, 20, 30 wt.% alpha-calcium sulfate hemihydrate. As a results, as the replacement ratio of alpha-calcium sulfate hemihydrate increased, the initial setting time of ordinary Portland cement and Portland blast-furnace slag cement mortar was faster. In addition, the compressive strength decreased with increasing replacement ratio of alpha-calcium sulfate hemihydrate in both ordinary Portland cement mortar and Portland blast-furnace slag cement mortar. The strength development of Portland blast-furnace slag cement mortar with alpha-calcium sulfate hemihydrate was effective than that of ordinary Portland cement mortar. On the other hand, in the case of the mortar with alpha-calcium sulfate hemihydrate, it was confirmed that shrinkage deformation was reduced at the early age by growth pressure of needle-shaped ettringite crystals produced by incorporation of alpha-calcium sulfate hemihydrate. However, the effect of inhibiting shrinkage deformation of mortar with alpha-calcium sulfate hemihydrate was not significant as the age passed. Therefore, it is considered that the alpha-calcium sulfate hemihydrate is useful as a construction material.

• Korean Journal of Animal Reproduction
• /
• v.19 no.3
• /
• pp.217-226
• /
• 1995

The objective of this experiment was to test the effect of EG F on nuclear maturation of pig immature oocytes in vitro. Basic medium used TCM-199 supplemented with 0.2 mM pyruvate, 1 ${\mu}\textrm{g}$/ml estradiol-I7$\beta$ and 25 ${\mu}\textrm{g}$/ml gentamycin, this medium treated with EGF, FSH and FBS. Experiment 1 examined to the effect according to the addition of FSH or EGF (0, 1. 10 and 100 ng EGF/ml) in oocytes maturation. Nuclear maturation rates (M ll %) of 1, 10 and 100 ng EGF/ml (83.0. 8fi.7 and H7.5%) treatments were significantly higher than those of non- and FSH-treated groups (27.3 and 60.3%, p < 0. 001). Experiment 2 examined to the interactive effects of EGF. FSH or FBS during oocytes maturation. Nuclear maturation rates (M ll %) of EGF alone, EGF plus FSH, EGF plus FBS, FSH plus FBS, and EGF plus FSH added FBS treatments (86.7, 90.2, 87.1. 89.6% and 92.6%) were significantly higher than those of non, FSH, and FBS alone treatments (22.3, 52.2 and 42.3%, p < 0.001). Also, cumulus cells expansion of oocytes maturation was examined to total treatments. Normal cumulus cells expansion was shown by FSH plus FBS, EGF or EGF with FBS combination treatments, but cumulus cells of oocyte complexes were still clumped together in EGF-treated groups although they had separated from oocytes. However, EGF showed a positive on nuclear maturation. These results conclude that EGF alone can stimulate nuclear maturation in pig immature oocytes.

• 전기의세계
• /
• v.24 no.4
• /
• pp.42-51
• /
• 1975

전기공학은 그 분야가 광범위하면서 세분된 여러 소분야로 구성되어 있기 때문에 이를 간단한 몇마디로 표현하기는 불가능하다. 그러나 전기기술자는 전하를 위시하여 전하간의 힘 및 전하간의 에너지 교환에 관하여 주로 관여하게 된다. 즉 전기기술자는 전기적 에너지 및 정보의 발생, 전송, 기억 및 제어를 최적화할 책임이 있고, 그 분야는 부단히 팽창일로에 있으며 변해가고 있다. 즉 학문적인 기초이론 뿐만아니라 실제 응용분야인 산업분야에서도 눈부신 발전과 변화를 가져왔다. 현대산업 및 기술구조의 질적개선은 기술 반감기의 감소, 막대한 양의 정보처리, 시스템의 대형화, 복잡화 현상을 가져왔으며 기술자체가 사회경제활동에 미치는 영향을 극대화시켰다. 그러므로 오늘날의 모든 전기기술자들은 신뢰성을 고려한 보다 넓은 의미에서의 책임을 느껴야 한다. 조국의 근대화와 방위산업육성 과정에서 중추적 역할을 담당할 이러한 전기공학분야의 중견연구원 및 기술자를 양성하는 공과대학전기공학과의 교과과정 역시 부단히 변하는 각종 환경에 적응될 수 있는 dynamic한 것이 되어야 한다. 즉 공과대학 전기공학과이 교과과정은 어떤 특정되고 고정된 기술 또는 설계에 대한 교과목으로 치우치는 것보다 수명이 길고 강력한 응용력과 창의력을 발휘하여 우리의 기술을 토착화하여 이를 우리의 것으로 만들 수 있는 것이 되어야 한다. 이러한 국내외적인 현실을 고려하여 당학회에서는 1974년도 조사연구사업의 일환으로 교과과정조사회를 구성하여 국내의 여러대학의 전기공학과 교과과정편성에 다소의 도움을 주고저 일차적인 시안으로서 다음과 같은 특징을 갖는 교과과정을 작성하였다.{3}$N$_{4}$등의 산화물 및 질화물로 대표되는 분자성 비정질 물질로서 금지대는 2eV보다 큰 세종류로 크게 분류할 수 있다. 분류할 수 있다. 한다. 단 개개의 문제에 관한 구체적인 해석 또는 검토에 관하여는 다음 기회에 미루기로하고, 우선 여기서는 당면문제로서 대처하지 않으면 안될 자동주파수제어문제및 계통의 경제운용문제만에 한정하여, 이것을 우리나라의 현상과 관련시켜 개설하고, 이들의 자동화에 관한 기본적인 문제를 간단히 적어 보겠다. 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다. 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.277-291
• /
• 1983

In order to investigate the shear characteristics of earth structure after construction. Four sample soils with different gradation were selected and compacted under the optimum moisture content and the maximum dry density. And the direct shear test and the triaxial compression test were performed with those sample soils under various pre-compression loads. The results were summarized as follows; 1. With the increase of the percent passing of No. 200 sieve, the cohesion of soil increased regularly and the internal friction angle of soil decreased with slow ratio. 2. The pre-compression increased the shear strength of compacted cohesive soil. The increase of cohesion was very apparent but the internal friction angle didn't show such regular tendency. 3. With the increase of pre-compression load, the slope of stress-strain curve showed steep at the early stage of horizontal strain. The vertical strain was small at the compression stage and big at the expansion stage. 4. When the vertical stress of shear test with increase in the horizontal strain was small, stress ratio(shear stress vs. vertical stress) of sample showed the largest value and the slope of stress ratio curve showed also steep. 5. When the sample was had the same condition, the cohesion of soil showed bigger value in the triaxial compression test and the internal friction angle of soil showed bigger value in the direct shear test.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.381-386
• /
• 1985

This experiment was conducted to investigate changes of soybean curd yield according to the extension of soaking time during manufacturing of soybean curd. To investigate those changes systematically, transmission electron microscopy and disc-gel electrophoresis were used. The soybean curd yield was increased from 45.0% to 50.5% and 55.4% respectively as soaking time is extended from 5 hours to 10 and 24 hours. The solid extraction and soybean milk coagulation were also increased according to the extension of soaking time. From disc-gel electrophoresis patterns of soybean milk protein and soybean curd protein, numbers of band were increased and major band thickened by expending the soaking time. Most of high molecular bands of soybean milk protein were transfered to soybean curd. Crude 7S proteins of soybean milk and soybean curd in dis-gel electrophoresis were appeared to be 4 and 5 bands respectively, and crude 11S proteins of soybean milk and soybean curd were appeared to be 9 and 8 bands respectively. Of soybean milk bands, most of 11S component transfered to soybean curd. Transmission electron photomicrographs revealed that the dimension of each protein body became larger and the numbers of spherosome around the protein bodies in unit area fewer by extending the soaking time of soybean.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.139-143
• /
• 2004

최근 고 해상도 위성영상정보의 민간 활용에 대한 수요가 증가하면서 기존의 공간 정보를 다루는 여러 응용분야에서 이에 관련된 많은 연구를 하고 있다. 도시교통 환경 분석을 위하여 위성영상정보를 처리하는 과정에 있어서 도로, 건물, 기타 선 구조와 같은 지형지물을 분석하는 과정은 사용자에 따라 주관적일 수 있다. 이러한 배경에서 수학적 그레이 레벨 모폴로지는 하나의 효과적인 접근으로 간주된다. 본 연구에서 지형지물 추출을 위해 윈도우 운영체제에서 실행되는 실질적인 응용 프로그램을 구현하였다. 이 프로그램에서 주요한 지형지물은 그레이 레벨 영상을 이용하여 개방(opening), 폐쇄(closing), 침식(erosion), 팽창(dilation)의 순차적 처리를 통하여 자동적으로 추출된다. 결과적으로, GDPA, 허프 변환 또는 다른 알고리듬들과 비교시 하나의 이점이 된다. 모폴로지 처리와 같이 본 프로그램은 그레이 레벨 값의 범위에 기반하여 지형지물을 추출을 위한 density slicing 기능 또는 주어진 경계치 보다 작은 화소 군집을 제거하는 처리인 'sieve filtering'을 제공한다. 이러한 기능들은 형태학적으로 처리된 결과를 증대하고 지형지물 종류들을 분리하는데 유용하다. 또한 배경의 제거, 잡음 탐지, 도시 환경 원격 탐사에서의 지형지물 특성화에 기여한다. 본 프로그램을 이용하는데 있어서 IKONOS 위성영상을 이용하여 시험 구현하였다. 결과, 다중 경계치 또는 steve filtering을 이용한 그레이 레벨 모폴로지 처리는 복잡한 지형지물과 많은 데이터로 구성된 고해상도 영상 내의 주어진 대상에서 자동적인 처리와 사용자 정의 sieve filtering으로 인한 효과적인 지형지물 추출 방법으로 간주 된다. 시안을 작성 표준화를 위한 첫 단계 시도를 소개하였다.분석 결과는 문장, 그림 및 도표, 장 끝의 질문, 학생의 학습 활동 수 등이 $0.4{\sim}1.5$ 사이의 값으로 학생 참여를 적절히 유도하는 발견 지향적 인 것으로 조사되었다. 그러나 장의 요약은 본문 내용을 반복하는 내용으로 구성되었다. 이와 같이 공통과학 과목은 새로운 현대 사회에 부응하는 교과 목표와 체계를 지향하고 있지만 아직도 통합과학으로서의 내용과 체계를 완전히 갖추고 있지 못할 뿐만 아니라 현재 사용되고 있는 7종의 교과서가 교육 목표를 충분히 반영하지 못하고 있다. 따라서 교사의 역할이 더욱더 중요하게 되었다.괴리가 작아진다. 이 결과에 따르면 위탁증거금의 징수는 그 제도의 취지에 부합되고 있다. 다만 제도운용상의 이유이거나 혹은 우리나라 주식시장의 투자자들이 비합리적인 투자형태를 보임에 따라 그 정책적 효과는 때로 역기능적인 결과로 초래하였다. 그럼에도 불구하고 이 연구결과를 통하여 최소한 주식시장(株式市場)에서 위탁증거금제도는 그 제도적 의의가 여전히 있다는 사실이 확인되었다. 또한 우리나라 주식시장에서 통상 과열투기 행위가 빈번히 일어나 주식시장을 교란시킴으로써 건전한 투자풍토조성에 저해된다는 저간의 우려가 매우 커왔으나 표본 기간동안에 대하여 실증분석을 한 결과 주식시장 전체적으로 볼 때 주가변동율(株價變動率), 특히 초과주가변동율(超過株價變動率)에 미치는 영향이 그다지 심각한 정도는 아니었으며 오히려 우리나라의 주식시장은 미국시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며,