• Title/Summary/Keyword: 팽창수축

Search Result 309, Processing Time 0.034 seconds

스트레칭이 가능한 $SnO_2$ 나노선 소자 제작

  • Sin, Geon-Cheol;Ha, Jeong-Suk
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.60-60
    • /
    • 2010
  • 최근 사람의 피부나 내부 장기처럼 수축과 팽창이 일어나는 부위 등에 이식 가능한 소자 개발에 대한 연구가 많이 보고되었다. 현재 이런 stretchable electronics에 대한 연구는 channel material로서 실리콘이나 유기물, 그리고, 광학 리소그래피가 가능한 micro-electronics 에 국한되어 있다. 우리는 CVD 로 성장된 수십 나노미터의 직경을 갖는 $SnO_2$ 나노선을 슬라이딩 전이하여 실리콘 웨이퍼 상에서 소자화하고 이를 스트레칭이 가능한 PDMS 기판에 전이하여 stretchable nanowire device를 구현하였다. 해당 소자는 윗면과 아랫면 모두 폴리머로 덮여 있고 측정을 위한 전극이 따로 구성되어 있어 소자 특성의 열화가 최소화되게 제작되었으며, 수축과 팽창 시 받는 스트레인 또한 최소화하는 mechanical neutral structure를 갖게 제작되었다. 또한, 소자와 소자 혹은 소자와 전극간의 연결을 S자 형태로 구성하여 기판으로 사용된 PDMS를 수십 % 스트레칭하여도 소자의 전기적 특성이 유지되는 것을 확인하였다. 이처럼 스트레칭이 가능한 나노선 소자는 구김이나 잡아 늘여지게 되는 다양한 표면위에 간단하게는 논리회로뿐만 아니라 나노선의 장점을 이용한 다양한 센서 및 기능 소자로서 응용이 가능할 것으로 예상된다.

  • PDF

Shape Extraction Using Inward and Outward Curve Evolution (양방향 곡선 전개를 이용한 형태 추출)

  • 김하형;김성곤;김두영
    • Proceedings of the Korea Institute of Convergence Signal Processing
    • /
    • 2000.08a
    • /
    • pp.225-228
    • /
    • 2000
  • 본 논문에서는 물체의 경계나 형태 추출을 위하여 레벨 세트 이론을 바탕으로 한 새로운 곡선 전개 방법을 제안한다. 특히 전처리 과정에서 잡음의 효과적 처리를 위하여 기존의 필터 방식들이 가지는 단점인 경계 부분의 blurring 현상을 줄이고 정확한 에지 위치를 보존할 수 있는 비등방성 확산필터(anisotropic diffusion filter)를 사용한다. 기존의 레벨 세트 방식이 수축이나 팽창 중 단지 한가지의 방식만 적용되어지는 반면, 제안한 방법은 물체의 경계 추출시 팽창과 수축이 동시에 가능하므로 특히 초기 곡선이 여러 물체에 걸쳐져 있는 경우에도 정확한 형태 추출이 가능하였다. 아울러 초기 곡선의 설정이 위치나 형태에 거의 제한을 받지 않기 때문에 추출을 원하는 영역이 아주 조금만 포함되어 있어도 정확한 형태 추출이 가능하였다.

  • PDF

고무소재의 열응력

  • Gang, Sin-Yeong;Hong, Chang-Guk
    • Rubber Technology
    • /
    • v.11 no.1
    • /
    • pp.12-26
    • /
    • 2010
  • 각종 산업제품의 주요 부품으로 사용되고 있는 고무재료는 사용 중 온도변화에 의해 체적 또는 길이 변화를 수반할 수 있어 결과적으로 고무제품의 성능이나 효율이 영향을 받게 된다. 특히 고온에서 고무제품의 치수변화를 제한하거나 일정치수를 강제할 경우 열수축이나 열팽창에 의해 응력이 발생하게 된다. 따라서 온도 변화에 따른 열응력의 측정은 고무제품의 정밀성과 성능을 평가하는 중요한 수단을 제공한다. 본 연구에서는 고무소재의 열응력 측정을 위한 새로운 측정방법을 개발하였고 이와 관련 새로운 시험장치를 설계, 제작하였다. 고무시편에 일정 변형의 인장을 준 상태에서 가열하면 열응력이 발생한다. 이 때의 열응력은 고무분자 사슬들의 운동성에 기인하며 배향된 고무분자 사슬들이 열역학적으로 랜덤 사슬형태로 돌아가려는 엔트로피적 힘이다. 따라서 온도가 높을수록 그 수축력은 증가하게 된다. 또한 고무분자 사슬의 사전 변형이 증가하면 그 열응력은 증가한다. 이때 열응력은 측정시간이 지남에 따라 최대치에 도달한 후 완화되며 그 완화속도는 설정온도에 의해 영향을 받는다. 여기서는 온도변화에 따른 고무시편의 열응력 측정결과를 소개하고, 고무분자 사슬의 엔트로피 변화와 점탄성적 흐름, 그리고 가열에 따른 고무 시편의 팽창 또는 수축이 열응력에 미치는 영향 등을 논의하였다. 특히 천연고무와 SBR 고무시편의 열응력 차이를 분자사슬의 운동과 연관하여 검토하였고, 가교밀도와 가교시스템이 각각 다른 고무시편에 대해 열응력 발생과에 따른 상관관계를 고찰하였다. 또한 시편의 형태와 두께가 열응력 발생에 미치는 영향도 검토하였다. 충전 배합고무의 경우 열응력에 영향을 미치는 인자로 고무분자 사슬의 운동성과 가교밀도 외에 고무재료와 충전제 사이의 물리 화학적 상호작용도 매우 중요한 요소가 된다. 배합고무에서 충전제의 영향을 검토하기 위해 실리카와 카본블랙을 선택하였고 배합고무의 열응력을 각각 측정하여 이들의 보강효과가 열응력에 미치는 영향에 대해 논하였다.

  • PDF

A Study on Characterization of Expansion Agent in Mortar with Light Burned Dolomite By-Product (경소백운석(輕燒白雲石) 부산물(副産物)을 활용(活用)한 바닥 몰탈용 팽창재(膨脹材)의 특성검토(特性檢討))

  • Lee, Keon-Ho;Min, Sung-Eoi;Lee, Hyoung-Woo;Cho, Jin-Sang;Cho, Kye-Hong;Han, Choon
    • Resources Recycling
    • /
    • v.21 no.6
    • /
    • pp.12-22
    • /
    • 2012
  • This study investigated a utilization technology of light burned dolomite. light burned dolomite ($CaMg(CO_3)_2$) generated in furnace (steel manufacturer) is an alternative to quick lime. Using light burned dolomite has an effect on reducing the consumption of fluorite slag MgO concentration in supersaturated solution by prolonging the life of softening effect. Armophous MgO, not containing periclase is formed by firing dolomite under $800^{\circ}C$. It has larger surface area and higher reactivity than periclase, and also shows better expansion effect than quicklime. Due to those effects, therefore, armophous MgO produced from light burned dolomite is used as an alternative expansion agent in mortar. In the experiment, characteristics of light burned dolomite were compared to those of existing expansion agents such as anhydrite and quicklime. Then, each expansion and shrinkage rates were measured over a period of about 3 months in both of 1m Jis mold at labscale and apartment mortar flooring at field scale. In the result, it was observed that light burned dolomite in mortar flooring more compensates for the expansion and shrinkage rates than the existing expansion agents, showing low expansion rate of below 0.05% and also decreases the crack.

Shrinkage Properties of High Performance Concrete Depending on Specimen Size and Constraint of Reinforcing Bar (공시체 크기 변화 및 철근구속에 따른 고성능콘크리트의 수축 특성)

  • Han, Cheon-Goo;Kang, Su-Tae;Koh, Kyung-Taek;Hann, Chang-Pyung
    • Journal of the Korea Concrete Institute
    • /
    • v.18 no.1 s.91
    • /
    • pp.13-19
    • /
    • 2006
  • This paper reports the test results for shrinkage properties of low shrinkage high performance concrete developed by the authors depending on specimen size and constraint of reinforcing bar. As properties in fresh concrete low shrinkage high performance concrete(LSHPC) combined with expansive additives and shrinkage reducing admixture resulted in increase SP dosage due to loss of fluidity compared with that of control mixture concrete, while the dosage of AE agent was decreased. LSHPC exhibited higher compressive and tensile strength than control mixture concrete. For the effect of specimen size, an increase in specimen size led to a reduction of drying shrinkage. However, it was found that the autogenous shrinkage was not affected by the specimen size and measuring method. For constraint condition, an increase in the ratio of reinforcing bar caused the slight reduction in the strain of reinforcing bar, while it increased the autogenous shrinkage stress. It was seen that LSHPC was effective to reduce autogenous shrinkage by as much as 70% compared with control mixture high performance concrete.

A Study on the Effect of Water Soluble Extractive upon Physical Properties of Wood (수용성(水溶性) 추출물(抽出物)이 목재(木材)의 물리적(物理的) 성질(性質)에 미치는 영향(影響))

  • Shim, Chong-Supp
    • Journal of the Korean Wood Science and Technology
    • /
    • v.10 no.3
    • /
    • pp.13-44
    • /
    • 1982
  • 1. Since long time ago, it has been talked about that soaking wood into water for a long time would be profitable for the decreasing of defects such as checking, cupping and bow due to the undue-shrinking and swelling. There are, however, no any actual data providing this fact definitly, although there are some guesses that water soluble extractives might effect on this problem. On the other hand, this is a few work which has been done about the effect of water soluble extractives upon the some physical properties of wood and that it might be related to the above mentioned problem. If man does account for that whether soaking wood into water for a long time would be profitable for the decreasing of defects due to the undue-shrinking and swelling in comparison with unsoaking wood or not, it may bring a great contribution on the reasonable uses of wood. To account for the effect of water soluble extractives upon physical properties of wood, this study has been made at the wood technology laboratory, School of Forestry, Yale university, under competent guidance of Dr. F. F. Wangaard, with the following three different species which had been provided at the same laboratory. 1. Pinus strobus 2. Quercus borealis 3. Hymenaea courbaril 2. The physical properties investigated in this study are as follows. a. Equilibrium moisture content at different relative humidity conditions. b. Shrinkage value from gre condition to different relative humidity conditions and oven dry condition. c. Swelling value from oven dry condition to different relative humidity conditions. d. Specific gravity 3. In order to investigate the effect of water soluble extractives upon physical properties of wood, the experiment has been carried out with two differently treated specimens, that is, one has been treated into water and the other into sugar solution, and with controlled specimens. 4. The quantity of water soluble extractives of each species and the group of chemical compounds in the extracted liquid from each species have shown in Table 36. Between species, there is some difference in quantity of extractives and group of chemical compounds. 5. In the case of equilibrium moisture contents at different relative humidity condition, (a) Except the desorption case at 80% R. H. C. (Relative Humidity Condition), there is a definite line between untreated specimens and treated specimens that is, untreated specimens hold water more than treated specimens at the same R.H.C. (b) The specimens treated into sugar solution have shown almost the same tendency in results compared with the untreated specimens. (c) Between species, there is no any definite relation in equilibrium moisture content each other, however E. M. C. in heartwood of pine is lesser than in sapwood. This might cause from the difference of wood anatomical structure. 6. In the case of shrinkage, (a) The shrinkage value of the treated specimen into water is more than that of the untreated specimens, except anyone case of heartwood of pine at 80% R. H. C. (b) The shrinkage value of treated specimens in the sugar solution is less than that of the others and has almost the same tendency to the untreated specimens. It would mean that the penetration of some sugar into the wood can decrease the shrinkage value of wood. (c) Between species, the shrinkage value of heartwood of pine is less than sapwood of the same, shrinkage value of oak is the largest, Hymenaea is lesser than oak and more than pine. (d) Directional difference of shrinkage value through all species can also see as other all kind of species previously tested. (e) There is a definite relation in between the difference of shrinkage value of treated and untreated specimens and amount of extractives, that is, increasing extractives gives increasing the difference of shrinkage value between treated and untreated specimens. 7. In the case of swelling, (a) The swelling value of treated specimens is greater than that of the untreated specimens through all cases. (b) In comparison with the tangential direction and radial direction, the swelling value of tangential direction is larger than that of radial direction in the same species. (c) Between species, the largest one in swelling values is oak and the smallest pine heartwood, there are also a tendency that species which shrink more swell also more and, on the contrary, species which shrink lesser swell also lesser than the others. 8. In the case of specific gravity, (a) The specific gravity of the treated specimens is larger than that of untreated specimens. This reversed value between treated and untreated specimens has been resulted from the volume of specimen of oven dry condition. (b) Between species, there are differences, that is, the specific gravity of Hymenaea is the largest one and the sapwood of pine is the smallest. 9. Through this investigation, it has been concluded that soaking wood into plain water before use without any special consideration may bring more hastful results than unsoaking for use of wood. However soaking wood into the some specially provided solutions such as salt water or inorganic matter may be dissolved in it, can be profitable for the decreasing shrinkage and swelling, checking, shaking and bow etc. if soaking wood into plain water might bring the decreasing defects, it might come from even shrinking and swelling through all dimension.

  • PDF

Effects of Riser Design and Chemical Composition on the Formation of Shrinkage Cavity in Gray and Ductile Iron Castings

  • Yu, Sung-Kon
    • Journal of Korea Foundry Society
    • /
    • v.24 no.2
    • /
    • pp.101-107
    • /
    • 2004
  • 회주철 및 구상흑연주철에 있어서 압탕방안 및 합금원소가 수축결함의 생성에 미치는 영향을 연구하였다. 두 종류의 압탕방안으로 실린더형상의 계단상시편을 제조하였으며 회주철의 경우 5조성(ISO 150, 200, 250, 300, 350), 구상흑연주철의 경우 6조성(SG 10, 20, 30, 40, 50, 60)을 사용하였다. 회주철 및 구상흑연주칠 공히, 1차 압탕방안의 경우 액상수축에 의한 1차수축결함이 후육부의 표면에 발생하였으며 수축결함의 내면은 매끄러웠다. 회주철의 경우 응고수축에 의한 2차수축결함은 생성되지 않았으나 구상흑연주철의 경우 모든 시편의 내부열점에 2차수축결함이 발생하였고 그 내면은 거칠었다. 2차압탕방안의 경우 회주철의 모든 시편에서는 1차 및 2차수축결함이 발생되지 않았다. 그러나 구상흑연주철의 경우 탄화물 생성원소가 첨가된 SG 40, 50 및 60의 3조성에서 2차수축결함이 열점에 생성되었다. 견고한 ���V주형을 사용하였기 때문에 주형벽이동으로 인한 표면팽창은 어느 경우에도 관찰되지 않았다.

A Study on the Shrinkage Reducing Properties of Steel Fiber Reinforced Ultra High Strength Cement Mortar (강섬유보강 초고강도 시멘트 모르터의 수축저감에 관한 연구)

  • Han Dong-Yeop;Heo Young-Sun;Pei Chang-Chun;Han Cheon-Goo
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2005.11a
    • /
    • pp.67-70
    • /
    • 2005
  • Ultra high strength concrete, nowadays, has been widely applied to construction of high-rise building. To improve ductility and mechanical properties, steel fiber is employed in UHSC. This study investigates practical application of expansive additives(EA) and shrinkage reducing agent(SRA), in order to secure volumetric stability and improved mechanical properties, such as autogenous shrinkage and dry shrinkage of steel-fiber-reinforced-ultra-high-strength-comet-mortar(FHSM). According to the test, individual addition of steel fiber does not affect shrinkage reduction, as expected. However FHSM, with combined addition of 5$\%$ of EA and 1$\%$ of SRA decreased 60$\%$ of autogenous shrinkage. It is considered that Proper combination of EA and SRA can secure the shrinkage resistance of FHSM.

  • PDF

Setting Shrinkage, Thermal Expansion Coefficient and Compressive Strength of Recycled PET Polymer Concrete with Montmorillonite (몬모릴로라이트를 이용한 재활용 PET폴리머 콘크리트의 경화수축, 온도팽창계수, 압축강도)

  • Jo Byong-Wan;Tae Ghi-Ho;Lee Du-Wha
    • Journal of the Korea Concrete Institute
    • /
    • v.16 no.2 s.80
    • /
    • pp.205-212
    • /
    • 2004
  • Recently, as concerns over environmental issues are raised more and more trend to use recycled waste for producing construction materials is also raised. Especially, a case of waste resin is considerably destroying the environment due to disposal way that most waste resin produced is disposed of landfill. This study is performed by polymer concrete with recycled PET resin in terms of obtaining safely clean construction resources and protection of environment. High setting shrinkage and sensitivity to heat are main disadvantages of Polymer Concrete (PC) despites of a lot merits. The aim of this study is to investigate basic properties such as setting shrinkage, length change and sensitivity to heat about PET recycled polymer concrete. The other is to check the possibility of use of Montmorillonite as one of a lot of additive without special coupling agent. As results of experiments, various properties of polymer concrete with recycled PET resin are similar with conventional PC except that polymerization time is longer. Montmorillonite was efficiently used to reduce setting shrinkage, length change and coenicient of thermal expansion related to heat with enhanced strength