• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.100-102
• /
• 2013

Magnetron-sputtering법을 사용하여 기존에 연구하였던 CrAlN (Cr 7：Al 3)박막에 Si를 첨가하여 Si의 함량 변화에 따라 미세구조와 화학적 결합상태, 온도저항계수(TCR) 및 산화저항의 영향과 기계적특성 개선을 통한 multi-functional heater resistor layer로써의 가능성을 연구하였다. CrAlSiN 박막의 Si 함량에 변화에 따라 온도저항계수 변화를 확인하였으며 X-선 회절 분석(XRD) 패턴 분석결과 CrAlSiN 박막의 결정구조가 Bl-NaCl 구조를 가지고 있는 것을 확인하였으며 SEM과 AFM을 통한 표면 및 미세구조 분석결과 Si의 함량이 증가할수록 입자가 조밀해짐을 알 수 있었다. 최근 digital priting technology의 핵심 기술로 부각되고 있는 inkjet priting technology는 널리 태양전지뿐만 아니라 thin film process, lithography와 같은 반도체 공정 기술에 활용 할 수 있기 때문에 반도체 제조장비에도 사용되고 있으며, 현재 thermal inkjet 방식을 사용하고 있다. Inkjet printing technology는 전기 에너지를 잉크를 배출하기 위해 열에너지로 변환하는 thermal inkjet 방식을 사용하고 있는데, 이러한 thermal inkjet 방식은 기본적으로 전기저항이 필요하지만 electrical resistor layer는 잉크를 높은 온도에서 순간적으로 가열하기 때문에 부식이나 산화 등의 문제가 발생할 수 있어 이에 대한 보호층을 필요로 한다. 하지만, 고해상도, 고속 잉크젯 프린터, 대형 인쇄 등을 요구되고 있어 저 전력 중심의 잉크젯 프린터의 열효율을 방해하는 보호층 제거에 필요성이 제기되고 있다. 본 연구는 magnetron-sputtering을 사용하여 기존의 CrAlN 박막에 Si를 합성하여 anti-oxidation, corrosion resistance 그리고 low temperature coefficient of resistance 값을 갖는 multi-functional heater resistor layer로써 CrAlSiN 박막의 Si 함량에 따른 효과에 초점을 두었다. 본 실험은 CrAlN 박막에 Si 함량을 4~11 at%까지 첨가시켜 함량의 변화에 따른 특성변화를 확인하였다. 함량이 증가할수록 amorphous silicon nitride phase의 영향으로 박막의 roughness는 감소하였으며 XRD 분석결과 (111) peak의 Intensity가 감소함을 확인하였으며 SEM 관찰시 모든 박막이 columnar structure를 나타내었으며 Si함량이 증가할수록 입자가 치밀해짐을 보여주었다.Si함량이 증가할수록 CrAlN 박막에 비하여 면저항은 증가하였으며 TCR 측정결과 Si함량이 6.5 at%일 때 가장 안정한 TCR값을 나타내었다. Multi-functional heater resistor layer 역할을 하기 위해서, CrAlSiN 박막의 원소 분포, 표면 거칠기, 미세조직, 전기적 특성 등을 조사하였다. CrAlN 박막의 Si의 첨가는 크게 XRD 분석결과 주상 성장을 억제 할 수 있으며 SEM 분석을 통하여 Si 함량이 증가할수록 Si3N4 형성이 감소하며 입자크기가 작아짐을 확인하였다. 면저항의 경우 Si 함량이 증가함에 따라 높은 면저항을 나타내었으며 Si함량이 6.5 at%일 때 가장 낮은 TCR 값인 3120.53 ppm/K값을 보였다. 이 값은 상용되고 있는 heater resistor보다 높지만, CrAlSiN 박막이 더 우수한 기계적 특성을 가지고 있기 때문에 hybrid heater resistor로 적용할 수 있을 것으로 기대된다.

• Korean Journal of Culture and Social Issue
• /
• v.16 no.3
• /
• pp.355-383
• /
• 2010

In this study, the effects of skill-utilization based underemployment on self-esteem and mental health were examined. Also the moderating effects of employment commitment and social support were verified. Data obtained by a longitudinally designed survey with the reemployed (N=153) after job loss were used. The skill-utilization based underemployment was measured in two ways. One is measured in the way that use objective data, the ratio of education - 'educational requirement for the current job' divided by 'individual educational attainment.' The other is measured in the way that use psychological and self-reported measure, two factors of overqualification - the absence of opportunity for growth (no-growth) and the occupational mismatch in educational attainment, skills and experiences (mismatch). The main effect revealed that the no-growth made self-esteem lower and mental health (GHQ-social maladjustment) worse. The significant interaction of the ratio of education and employment commitment indicates that the negative effects of underemployment measured by the ratio of education on mental health (GHQ-social maladjustment, GHQ-depression/anxiety) were greater for those perceiving low employment commitment than for those perceiving high employment commitment. The significant interaction of the ratio of education and social support indicates that the negative effects of underemployment measured by the ratio of education on mental health (GHQ-depression/anxiety) were greater for those perceiving low social support than for those perceiving high social support. The two moderators also interacted with the two factors of perceived overqualification. Employment commitment had significant interaction effects with the no-growth and the mismatch on self-esteem and mental health (GHQ-depression/anxiety), whereas social support had a significant interaction only with the no-growth on mental health (GHQ-depression/anxiety). The significant interactions show that employment commitment and social support function as buffers in reducing the negative effects of skill-utilization based underemployment on self-esteem and mental health.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1690-1691
• /
• 2011

본 논문에서는 H1N1 인플루엔자 A 바이러스(influenza A H1N1 virus) 검출을 위한 산화아연 나노구조(zinc oxide nano structure) 기반의 전기화학적 면역센서를 제작하고 그 특성을 분석하였다. H1N1 인플루엔자 A 바이러스는 빠른 전파 속도 때문에 정확하고 빠른 검출이 필요하다. 먼저, 2 $mm^2$의 표면적을 갖는 패턴된 금 전극 위에 열수방식(hydrothermal method)으로 성장시킨 산화아연 나노구조가 선택적으로 형성되도록 리프트-오프(lift-off) 방법을 사용하였다. 0.01 M phosphate buffered saline(pH 7.4)에서 2 ${\mu}g$/mL 농도의 1차 항체를 정전기력에 의해 산화아연 나노구조에 고정화한 후, 10 pg/mL ~ 5ng/mL 농도의 H1N1 항원을 적용하여 포획 항체에 결합시키고 HRP(horseradish peroxidase) 효소가 결합된 검출 항체를 항원에 결합시키는 샌드위치 ELISA법을 이용하였다. HRP와 반응하는 TMB(3,3', 5,5'-tetramethylbenzidine)와 과산화수소가 포함된 acetate buffered 용액(pH 5)을 전해질로 사용하고 순환전압전류 측정법(cyclic voltammetry)으로 센서의 특성을 분석하였다. 측정된 순환전압전류그래프(cyclic voltammogram)에서 H1N1 항원 농도 10 pg/mL ~ 5 ng/mL의 응답 전류는 276.47 ${\pm}$ 21.72 nA (평균 ${\pm}$ 표준편차, n=4) ~ 478.89 ${\pm}$ 6.21 nA로 측정되었고, logarithmic하게 증가하는 응답 전류 특성을 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.263-272
• /
• 2013

Printed electronics creates electrically functional devices by printing on variety of substrates. Printing typically uses common printing equipment or other low-cost equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography and inkjet. Compared to conventional manufacturing of microelectronics, printed electronics is characterized by simpler and more cost-effective fabrication of high and low volume products. Now there is huge effort towards printing many other more functional components, from displays to transistors to photovoltaic cells, using the full range of printing technologies - from inkjet to roll to roll analogue print techniques. The market for printed electronics will rise from $1.99 billion in 2010 to $55.10 billion in 2020. In 2030, this industry could be $300 billion - larger than the silicon semiconductor industry - from lighting to displays[8].

• Cartoon and Animation Studies
• /
• s.22
• /
• pp.1-16
• /
• 2011

The question acutely raised regarding Korea's entrance test is not just a matter of yesterday or today. It is not an exception to cartoon related fields, which lack of creativity and patterning trend, problems according to the types of autonomous performance tests for each school, problem of evaluation are being pointed out. As such alternative, methods such as expansion of time for performance test, introduction of extra performance test for evaluating creativity, and public sector exclusively taking in charge of creativity evaluation, and etc. will be made as the subject of discussion. Therefore, the most important assumption is to establish what Universities are intending to teach to students first, and to teach such thing, the questions of their entrance tests should contain relevant criteria so that students with relevant abilities would be selected. Even after entering school, constant monitoring would be necessary, and if it shows different results as expected, the criteria should be reviewed again. As such, the reason for Universities requiring much things is because the Universities are, the subject of student selection, the subject which requires certain abilities to students, and the subject of evaluation. Therefore, it is because a University can achieve its original purpose only when good talented students are obtained through such process of selection and are developed through education.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.179-179
• /
• 2006

산업기술의 고도화에 따른 IT 산업의 급속한 발전으로 각종 전자, 정보통신기기에 대해 더욱 소형화 고성능화를 요구하고 있다. 이와 같은 경향에 따라 더욱 향상된 기능을 가지고 각종 소자 부품의 개발과 동시에 유독 물질 발생이 없는 청정생산기술 개발에 대한 요구가 끊임없이 제기 되어 왔다. 이러한 요구에 부응하여 기술들이 개발되고 있으며 그 중의 하나로 잉크젯 프린팅 기술이 연구되고 있다. 특히 Dod(Drop on Demand) 방식의 잉크젯은 가정용 프린터로 개발되어 널리 보급된 기술이지만, 이 기술을 PCB 제조기술에 전용하면 친환경 생산공정으로 부품 성장밀도를 증대 시킬 수 있다. 기존의 PCB 제조기술은 전극과 신호 패턴을 형성시키기 위하여 노광공정과 에칭공정을 반복적으로 사용하고 있는데, 노광공정에서 쓰이는 마스크와 유틸리티 설비 유지 비용의 문제가 대두되고 있다. 노즐로부터 분사된 잉크 액적들의 집합으로 기판위에 점/선/면의 인쇄이미지를 구현하게 된다. 그러므로 인쇄 해상도는 잉크액적 및 인쇄 방법, 기판과의 상호작용에 크게 의존하게 된다. 잉크 액적과 기판의 상호작용에 영향을 미치는 요소로는 잉크의 물리화학적 물성(밀도, 점도, 표면장력), 잉크 액적의 충돌 조건(액적 지름, 부피, 속도), 그리고 기판의 특성(친수/소수성, Porous/Nonporous, 표면조도 등)을 들 수 있겠다. 우선적으로 노즐을 통과해서 분사되는 액적의 크기에 따라 기판위에 형성되는 라인의 두께 및 폭이 결정된다. 떨어진 액적이 기판위에서 퍼지는 것을 UV 조사를 통한 가경화 과정을 통해서 최종적으로 라인의 투께 및 폭을 조절하려고 한다. 따라서 선폭 $75{\mu}m$의 일정한 미세 배선을 형성시키기 위해 액적 크기 조절과 탄착 resist 액적 표면의 UV 가경화 조건으로 구현하려고 한다. 또한 DPI(Dot Per Inch) 조절을 통한 인쇄로 탄착 resist의 두께 확보 후 에칭시 박리되는 현상을 억제 시키려 한다.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.59-67
• /
• 2017

Recently, integration of parts is accelerating according to the growth of the smart mobile industry. The integration of these parts causes problems of interference phenomena between the parts, and the importance of electromagnetic wave shielding technology to solve this problem is highlighted. Electromagnetic wave shielding technology is implemented so as to reflect or absorb electromagnetic waves, and generally conductive materials are utilized for electromagnetic wave shielding. Transparent shielding technology is required according to recent industrial changes. In this research, we propose transparent the shielding film using imprint technology with conductive composite binder. Utilizing UV polymerized acrylic binder to produce a conductive composite binder. Spherical, plate and stacked silver particles were used for conductivity. The changes of the curing characteristics, conductivity and adhesion were observed according to the structural characteristics of the silver particles. The use of spherical particles was the most efficient in the curing process, and an additional curing system was required to complement the UV-shadowing structure. In the conductivity evaluation, the stacked structure showed excellent characteristics. The adhesion of spherical system was the best. It is evaluated as a result of irregularities on the surface. Ultimately, the patterned film using this showed excellent transparency characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3194-3200
• /
• 2012

The aim of the paper is systematically to organize the historical facts of financial IT development process through various tracking and proved knowledge, it is to propose the direction and the advanced frame of core-banking model in next generation for the year 2020s. To achieve it, this study variously analyzed the meaningful pattern of development process of financial IT by backtracking life-cycle of Core-Banking model and it presented new model of Core-Banking for the past 40 years. In research findings, the life cycle of financial IT system and core-banking model have been analyzed about 10 years and the longest model of life cycle is about 33 years. As a result, It proved to be desirable that the advanced frame of the Core-Banking model adds the functions of business hub and product life cycle management to basic frame of its existing model in the future. In addition, big bang development method of new next generation system must be sublated. Also, They need to be initiated more business-oriented than IT-oriented. Along with this, the financial IT should be developed into the convergence industry, and it needs to extend the systematization of Core-Banking model studies and more professionals. Finally, this study has arranged the financial IT development process in domestic and presents new frame through analyzing intensively the Core-Banking model for the first time Therefore, it can be contributed to serve the guideline regarding the direction in new next generation system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.250-258
• /
• 2021

This study was conducted to investigate the effect of feeding systems on feed intake, weight gain, and fawn performance (Cervus canadensis) and estimation of grazing intensity in Elk doe at pasture. A sixteen Elk doe about 236.2 kg were randomly assigned to two feeding treatments. The treatment consisted of a barn feeding system (BF) and grazing at pasture (GR), and pasture was mainly composed of tall fescue, orchard grass, and Kentucky bluegrass. The moisture content of pasture was 19.51~22.61%, which was similar during experimental periods. The crude protein content was significantly higher from June to July (p<0.05). The contents of neutral detergent fiber and acid detergent fiber ranged 53.65~60.18%, and 26.08~29.10%, respectively. There were no significant differences between feeding systems on supplementary feed intake, but the roughage and total dry matter intake showed significant differences between treatment groups (p<0.05), except for May. In August, roughage intake was dramatically decreased in the GR group due to summer environmental changes. On the other hand, the higher intake of roughage in September might be related to nutrient intake for mammals. There was no difference in body weight between treatment groups, but the fawn performance was significantly higher in the GR group (p<0.05). These results might be suggested that grazing elk doe might positively affect fawn growth. However, it is considered that BF might increase the deer weaning rate during the parturition period, since the lower weaning rate in the GR group compared to the BF group. The grazing intensity of Elk doe was increased from May to July and decreased in August, which was influenced by pasture productivity. The average grazing intensity of Elk doe was found to be 15 heads/ha, which might be controlled by supplementary feeding. Further studies needed that mixed sowing methods and fertilization management in old grazing pastures for improved pasture productivity.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.103-114
• /
• 2014

The concept of entrepreneurial orientation has been recognized as a key driver for success of business ventures. Since small and medium-sized business ventures usually lack in business experience, firm level entrepreneurship seems to play an important role in generating firm performance. Following those logics, traditional approaches assumed that the relationship between entrepreneurial orientation and firm performance is linear, but recently studies start to report non-linear relationships. However, only a few researches examines and compares the performance effects of entrepreneurial orientation with diverse performance indicators. Current study explores the effects of entrepreneurial orientation both on financial and innovative performance with 1,497 Korean small and medium-sized business ventures. This study finds that there is a linear relationship between entrepreneurial orientation and financial performance, but inverted U-shaped relationships between entrepreneurial orientation and innovative performance, measured by product novelty and patent issued. Also those relationship patterns are consistent with different measurement of entrepreneurial orientation. Based on these results, theoretical implications with some limitations are discussed.