• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.85-89
• /
• 2014

We propose the new fabrication method of a 70 nm half-pitch wire grid polarizer with high performance using magnetic soft mold. The device is a form of aluminium gratings on a PET(Polyethylene phthalate) substrate whose size of $3cm{\times}3cm$ is compatible with a TFT_LCD(Tin Flat Transistor Liquid Crystal Display) panel. A magnetic soft mold with a pitch of 70 nm is fabricated using two-step replication method. As a result, we get a NWGP pattern which has 70.39 nm line width, 64.76 nm depth, 140.78 nm pitch, on substrate. The maximum and minimum transmittances of the NWGP at 800 nm are 75% and 10%, respectively. This work demonstrates a unique cost-effective solution for nanopatterning requirements in consumer electronics components.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.89-98
• /
• 2004

In this paper, we implement a digital holographic security card system that combines digital holographic memory using random phase encoded reference beams with electrical biometrics. Digitally encoded data including a document, a picture of face, and a fingerprint are recorded by multiplexing of holographic memory. A random phase mask encoding reference beams are used as a decoded key to protect illegal counterfeit. As a result, we can achieve a raw BER of 3.6${\times}$10-4 and shift selectivity of 4${\mu}{\textrm}{m}$ using the 2D random phase mask. Also, we develop a recording pattern and image processing which are suitable for a low cost reader without a position sensing photo-detector for real time data extraction and remove danger of fraud from unauthorized person by comparing the reconstructed holographic data with the live fingerprint data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1015-1020
• /
• 2011

Nanoimprint lithography has been actively investigated. This method can replicate a nanopatterned master stamp onto a thin polymer film on a silicon substrate and so on. In this study, a square-shaped hollow piezoelectric actuator is presented, which is newly developed. This actuator is used for driving a nanoscale stamp in nanoimprint lithography instead of a conventional electric motor. The fabricated prototype actuator has 95 layers and side lengths of 23 mm and 18 mm for the outer and inner squares, respectively. By adopting a novel process instead of the conventional forming process for fabricating a one-layer actuator, the one-layer is composed of four rectangular segments produced by sawing a ceramic film with a thickness of 0.3 mm. The basic characteristics on displacement and generation force of the fabricated prototype actuator are experimentally investigated. Furthermore, the displacement characteristics obtained by using a PI controller are tested and discussed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.4
• /
• pp.247-258
• /
• 2009

Distributed file systems running on a cluster of inexpensive commodity hardware are being recognized as an effective solution to support the explosive growth of storage demand in large-scale Internet service companies. This paper presents the design and implementation of BeanFS, a distributed file system for large-scale e-mail services. BeanFS is adapted to e-mail services as follows. First, the volume-based replication scheme alleviates the metadata management overhead of the central metadata server in dealing with a very large number of small files. Second, BeanFS employs a light-weighted consistency maintenance protocol tailored to simple access patterns of e-mail message. Third, transient and permanent failures are treated separately and recovering from transient failures is done quickly and has less overhead.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.749-754
• /
• 2022

High adhesion and water resistance of the skin surface are required for wearable and skin-attachable electronic patches in various medical applications. In this study, we report a stretchable electronic patch that mimics the drainable structure pattern of the hexagonal channels of frog's pads and the sucker of an octopus based on carbon-based conductive polymer composite materials. The hexagonal channel structure that mimics the pads of frogs drains water and improves adhesion through crack arresting effect, and the suction structure that mimics an octopus sucker shows high adhesion on wet surfaces. In addition, the high-adhesive electronic patch has excellent adhesion to various surfaces such as silicone wafer (max. 4.06 N/cm²) and skin replica surface (max. 1.84 N/cm²) in dry and wet conditions. The high skin-adhesive electronic patch made of a polymer composite material based on a polymer matrix and carbon particles can reliably detect electrocardiogram (ECG) in dry and humid environments. The proposed electronic patch presents potential applications for wearable and skin-attachable electronic devices for detecting various biosignals.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.149-154
• /
• 2007

Nanoimprint lithography (NIL) is useful technique because of its low cost and high throughput capability for the fabrication of sub-micrometer patterns which has potential applications in micro-optics, magnetic memory devices, bio sensors, and photonic crystals. Usually, a chemical surface treatment of the stamp is needed to ensure a clean release after imprinting and to protect the expensive original master against contamination. Meanwhile, adhesion promoter between resin and substrate is also important in the nanoscale pattern. In this work, we have investigated the effect of surface treatment using silane coupling agent as release layer and adhesion promoter for UV-Nanoimprint lithography. Uniform SAM (self-assembled monolayer) could be fabricated by vapor deposition method. Vapor phase process eliminates the use of organic solvents and greatly simplifies the handling of the sample. It was also proven that 3-acryloxypropyl methyl dichlorosilane (APMDS) could strongly improve the adhesion force between resin and substrate compared with common planarization layer such as DUV-30J or oxygen plasma treatment.

• Archives of design research
• /
• v.14 no.2
• /
• pp.163-174
• /
• 2001

William Morris(1834-1896) was the most versatile and talented of all British nineteenth century polymaths. Since his death over one hundred years ago his achievements as an artist, designer, manufacturer, shop-keeper, poet, author, publisher, printer, collector, teacher, conservationist, political activist and environmentalist have influenced the lives and work of people throughout the world. Moris is now best known for his attractive and colorful patterns. The decorating firm of Morris, Marshall, Fault & Company(Morris & Company after 1875) was established in 1861. Over the years it produced works, ranging from stained·glass windows and furniture to tapestries, carpets and printed and woven fabrics, that had great influence on the course of British design. His earliest experiments with the craft were amateurishly worked embroideries made for his own use. Before long, Morris began to produce textiles on a more commercial basis. In order to control production properly, Morris set about learning the various textiles techniques, first dyeing and blockprinting, hand-loom jacquard and eventually, carpet and tapestry weaving. This extraordinary involvement with the practical side of manufacture separated Morris from all other designers of his time and contributed in no small way to his success. Morris's designs for textiles, embroidery, dyeing, woven, carpet and tapestry were commercially produced, that are most universally admired and frequently copied today. These have a timeless quality arising from the designers respect for and knowledge of the technique. Of equal importance was his love of nature, evidence of which can be seen in even the smallest details of each of his patterns.

• Journal of Korean Historical Folklife
• /
• no.45
• /
• pp.7-50
• /
• 2014

This study focuses on the funeral rites for Queen Wongyeong during the early Joseon period as part of a review of the changes in the state funeral system and ceremonial procedures. Conducted by the king in his role as chief mourner, the state funeral for King Taejong's wife Queen Wongyeong that emerged during the 2nd year of King Sejong marked the first example recorded in the sillok (Annals of the Joseon Dynasty) of the three year-mourning rite being applied. In terms of the clothing for the state funeral, the significance of Jolgok (a rite conducted on the 100th day following the day of death) was emphasized, while the existing yeokwolje (period of wearing mourning clothes, one month was equated with one day) was abandoned. The existing temporary office system for state funerals was reorganized into a three-office system consisting of the Binjeon dogam (Office for Chapel of Rest), Gukjang dogam (Office for Funeral Rites), and Salleung dogam (Office for the Establishment of Royal Tombs). Buddhism-related rites greatly decreased and were increasingly regulated. The ceremonial procedures were also modified in accordance with the rites directly conducted by the king during the three-year mourning period. The basic pattern of the ceremonial procedure consisted of kneeling / wailing - salute - kneeling/ wailing, and, based on the wuje (rites to console the deceased), was divided into 'make offerings to the deceased' (奠, jeon) and 'hold a memorial service for the deceased' (祭, je). This reflected the differing perceptions of jeon (奠) and je (祭) following the establishment of auspicious rites (gillye) during the reign of King Taejong. In short, the state funeral for Queen Wongyeong provides materials with which to analyze the establishment of the funeral rites and ceremonial procedures designed based on the actual three-year mourning period observed by the king, study the ritual ceremonies conducted during the ancient period, as well as foster an understanding of ancient systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.131-131
• /
• 2016

기원전 5000년 이집트에서부터 시작된 도금은 시간이 지남에 따라 점점 발전하여, 1900년대에 들어 전기를 이용한 도금공정이 개발되었고, 현재 뿌리산업으로써 각종 제조업에 널리 이용되고 있다. 도금 공정은 금속을 부식으로부터 보호하고, 제품의 심미성과 기능성, 생산성 등을 높이기 위해 주로 이용된다. 전주도금 공정은 완벽하게 동일한 형태의 생산품을 다량으로 제작 할 수 있기 때문에, 그 높은 생산성으로 주목 받고 있다. 특히, 나노/마이크로 크기의 정밀 소자 등을 가공하는 차세대 기술인 LIGA공정과 접목이 가능하다는 장점이 있다. 몰드를 이용하여 복제하는 방식인 전주 도금은 도금공정이 끝난 후 몰드와 완성된 제품을 분리해내는 추가공정이 필연적으로 발생하게 되는데, 둘 사이의 접착력을 낮추기 위하여 몰드의 표면에 이형박리제를 도포하게 된다. 이형박리제로는 전기가 잘 흐르면서 접착력이 낮은 이산화 셀렌이나 중크롬산이 주로 이용되지만, 원활한 박리를 위해서는 그 두께가 30 um 이상 확보되어야 하기 때문에 정밀한 미세구조 전주도금이 어렵다는 문제점이 있다. 또한 이와 같은 화학 약품들은 매우 유독하기 때문에 추가적인 폐수 처리 공정이 필요하며, 작업자의 안전을 위협하고 심각한 환경 오염을 초래한다는 추가적인 문제가 발생한다. 따라서, 매우 얇고 친 환경적이며 안전한 전주도금 이형박리제에 대한 연구가 요구되고 있다. 본 연구에서는 전주도금 몰드로 사용한 구리의 표면에 TCVD를 이용하여 단일 층 그래핀을 성장시킨 후, 그래핀이 코팅된 몰드에 구리를 전주도금하여 박리하였다. 박리 후 그래핀은 몰드에 손상 없이 남아있는 것을 Raman microscopy를 통해서 확인하였고, 몰드와 그래핀 사이의 접착력 (약 $0.71J/m^2$)에 비해 그래핀과 전주도금 샘플간에 낮은 접착력 (약 $0.52J/m^2$)을 갖는 것을 확인하였다. 이와 같이 낮은 접착력을 통해 박리 시 표면구조의 손상 없이 정밀한 구조의 미세 패턴구조를 형성할 수 있었다. 전주도금을 이용한 전극 형성과 고분자와의 융합을 통해 유연기판을 제작하여 bending 실험을 진행하였다. $90^{\circ}$의 bending 각도로 10000회 이하에서는 저항의 변화가 없었고, LED chip을 mounting한 후 곡률반경 4.5 mm까지 bending을 진행하여도 이상 없이 LED가 발광하는 것을 확인하였다. 위와 같은 전주도금 공정을 이용하여 고집적 전자기기, 광학기기, 센서기기 등의 다양한 어플리케이션의 부품제조에 활용될 수 있을 것으로 기대한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.423-430
• /
• 2013

Recently, the personal identification technologies using vein pattern of back of the hand, palm, and finger have been developed actively because it has the advantage that the vein blood vessel in the body is impossible to damage, make a replication and forge. However, it is difficult to extract clearly the vein region from captured vein images through common image prcessing based region segmentation method, because of the light scattering and non-uniform internal tissue by skin layer and inside layer skeleton, etc. Especially, it takes a long time for processing time and makes a discontinuity of blood vessel just in a image because it has non-uniform illumination due to use a locally different adaptive threshold for the binarization of acquired finger-vein image. To solve this problem, we propose illumination normalization based fast method for extracting the finger-vein region. The proposed method has advantages compared to the previous methods as follows. Firstly, for remove a non-uniform illumination of the captured vein image, we obtain a illumination component of the captured vein image by using a low-pass filter. Secondly, by extracting the finger-vein path using one time binarization of a single threshold selection, we were able to reduce the processing time. Through experimental results, we confirmed that the accuracy of extracting the finger-vein region was increased and the processing time was shortened than prior methods.