• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.406-416
• /
• 2001

Single path routing schemes using dynamic routing metric amy find out the dynamic network status and recompute paths to keep the traffic from the highly loaded regions of the network. This type of routing approach, however, may lead to a routing oscillation, and further, it cannot exploit multi-paths that may frequently exist in the real network. We propose a multipath routing scheme with dynamic load balancing, called MP-DLB, which is capable of reducing the overhead incurred by the multipath routing with dynamic load balancing approach while taking advantage of the high routing performance provided by the approach. According to the analysis of Internet packet traces which show that a high percentage of network traffic is destined for a small number of networks, MP-DLB applies the multipath routing with dynamic load balancing only to a limited subset of all the destinations in the network. For the rest of the destinations, it applies traditional single path routing scheme. This approach may reduce overall routing overheads by limiting the number of destinations to apply the more complicated routing scheme while it can keep the routing performance high by providing efficient routing for the most significant traffic in the routing performance. A series of simulations are done to analyze the performance of MP-DLB. The simulation results show that MP-DLB may effectively cope with the congestion and achieve high routing performance by distributing traffic streams that are generated from varying sources and heading toward a specific hot destination over multi-paths.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.518-531
• /
• 2004

This paper discusses a testbed architecture for implementing scalable service differentiation in the Internet. The differentiated services (DiffServ) testbed architecture is based on a model in which a bandwidth broker (BB) can control network resources, and the ALTQ can reserve resources in a router to guarantee a Quality of Service (QoS) for incoming traffic to the testbed. The reservation and releasemessage for the ALTQ is contingent upon a decision message in the BE. The BB has all the information in advance, which is required for a decision message, in the form of PIB. A signaling protocol between the BB and the routers is the COPS protocol proposed at the IETF. In terms of service differentiation, a user should make an SLA in advance, and reserve required bandwidth through an RAR procedure. The SLA and RAR message between a user and the BB has implemented with the COPS extension which was used between a router and the BB. We evaluates the service differentiation for the video streaming in that the EF class traffic shows superb performance than the BE class traffic where is a network congestion. We also present the differentiated service showing a better packet receiving rate, low packet loss, and low delay for the EF class video service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.284-287
• /
• 2000

Recently, developing medical devices have a tendency becoming the module for satisfying user's mutual complex needs. Because the most effective method for the observation of patients condition a diagnosis and a treatment is collecting data from various devices and controling operation following it. Module tendency is more popular due to manage easily totally many individual systems. This study implemented communication protocol to control by one control system connecting modular medical devices. Implemented system consist of one master module controlling all module and managing communication and many Slave modules. Communication between each modules introduced SPI(Serial Peripheral Interface) among many synchronous serial communication methods for the exact transmission and receipt of data. All communication executes by packet format. This can detect error. And, this protocol introduced PNP(Plug And Play) function that auto-detect connecting or removing module during running. This protocol exactly transmitted and received in faster speed more than 1Mbps. And in practical application to the ventilator this confirmed to give and take real-time data. And various functions by th central control system is implemented in this protocol.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.241-248
• /
• 2006

Mobile computing has such characteristics as portability, wireless network, mobility, etc. These characteristics cause various problems to mobile terminals like frequent disconnection, high error rate, and varying network status. These problems motivate us to develop an adaptive error control mechanism for supporting multimedia service in mobile computing environment. In this paper, we propose the Adaptive Error Control(AEC) scheme using client's buffer size and current error rate. After categorizing the status into four groups according to client's buffer size and current error rate, this scheme applies an appropriate error control scheme to each status. In this scheme, thresholds of buffer size and error rate are determined by the data transmission time, play rate and average VOP size, and by the probability of error for a sequence of packets. The performance of proposed scheme is evaluated by flaying MPEG-4 files on an experimental client/server environment, respectively. The results show that error correcting rate is similar to other schemes while the time for correcting error reduce a little. In addition, the size of data for correcting error is decreased by 23% compared with FEC and Hybrid FEC, respectively. Theses results demonstrate that the proposed scheme is more suitable in mobile computing environment with small bandwidth and varying environment than existing schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.702-709
• /
• 2003

In this paper, we propose an efficient and QoS-aware MAC scheduling algorithm for Bluetooth, which considers both throughput and delay performance of each Master-Slave pair in scheduling decisions, and thus, attempts to maximize overall performance. The proposed algorithm, MTDPP (Modified Throughput-Delay Priority Policy), makes up for the drawbacks of T-D PP (Throughput-Delay Priority Policy) proposed in [6] and improves the performance. Since Bluetooth employs a master-driven TDD based scheduling algorithm, which is basically operated with the Round Robin policy, many slots may be wasted by POLL or NULL packets when there is no data waiting for transmission in queues. To overcome this link wastage problem, several algorithms have been proposed. Among them, queue state-based priority policy and low power mode-based algorithm can perform with high throughput and reasonable fairness. However, their performances may depend on traffic characteristics, i.e., static or dynamic, and they require additional computational and signaling overheads. In order to tackle such problems, we propose a new scheduling algorithm. Performance of our proposed algorithm is evaluated with respect to throughput and delay. Simulation results show that overall performances can be improved by selecting suitable parameters of our algorithm.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.783-787
• /
• 2008

IEEE 802.16/WiBro, one of the representative Broadband Wireless Access (BWA) systems, defines QoS negotiation between BS and SS and five service classes to guarantee QoS for flows. The five service classes are UGS, ertPS, rtPS, nrtPS, and BE, but the standard does not define how to provide services to flows according to the service classes. Existing research works have been studied about the scheduler architecture to effectively utilize the IEEE 802.16/WiBro systems. These works use the original packet scheduling algorithm for service classes. However, it is necessary to consider bandwidth allocation mechanisms in scheduling algorithms since bandwidth allocation mechanisms are different according to service classes. Especially, bandwidth allocation mechanisms should be considered for the scheduling of rtPS class since rtPS class uses the polling mechanism that takes time to allocate bandwidth and has the minimum latency constraint. Therefore, we propose two stage dropping scheme for rtPS class that is sensitive to latency, and thus it reduces the wasted resources and provides efficient service to rtPS class.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.385-396
• /
• 2017

Many IoT platforms have been proposed for various IoT devices, from low-end to high-end performance. We previously proposed a new IoT platform called MinT that supports the operation of the sensing devices and network communication. In the proposed platform, the things can flexibly connect to each other and efficiently share their information. Most IoT platforms, including the MinT, support thread pooling to quickly process requests. However, using a thread pool with a fixed thread count can cause network delay and inefficient energy consumption. In this paper, we propose an enhanced method to manage the thread pool efficiently by adjusting the number of threads every cycle to regulate the device's performance. In particular, we aim to improve the performance of the Interaction Thread Pool Group, which is responsible for analyzing, processing, and re-transmitting the received packets. The experiment shows that the improved method increases the average throughput by approximately 25% compared to the existing platforms. Finally, using the proposed method, the MinT can reduce the transmission delay and energy consumption of devices in the IoT environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.48-58
• /
• 2009

Geo-graphical routing protocols as GPSR are known to be very suitable and useful for vehicular ad-hoc networks. However, a corresponding node can include some stale neighbor nodes being out of a transmission range, and the stale nodes are pone to get a high priority to be a next relay node in the greedy mode. In addition, some useful redundant information can be eliminated during planarization in the recovery mode. This paper deals with a new recovery mode, the Greedy Border Superiority Routing(GBSR), along with an Adaptive Neighbor list Management(ANM) scheme. Each node can easily treat stale nodes on its neighbor list by means of comparing previous and current Position of a neighbor. When a node meets the local maximum, it makes use of a border superior graph to recover from it. This approach improve the packet delivery ratio while it decreases the time to recover from the local maximum. We evaluate the performance of the proposed methods using a network simulator. The results shown that the proposed protocol reveals much better performance than GPSR protocol. Please Put the of paper here.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.80-88
• /
• 2007

High adaptability and scalability are two critical issues in implementing a very complex system in a single chip. To obtain high adaptability and scalability, novel system design methodology known as communication-based system design has gained large attention from SoC designers. NoC (Network-on-Chip) is such an on-chip communication-based design approach for the next generation SoC design. To provide high adaptability and scalability, NoCs employ network interfaces and routers as their main communication structures and transmit and receive packetized data over such structures. However, data packetization, and routing overhead in terms of run time and area may cost too much compared with conventional SoC communication structure. Therefore, in this research, we propose a novel methodology which automatically generates a hybrid communication structure. In this work, we map traditional pin-to-pin wiring structure for frequent and timing critical communication, and map flexible and scalable structure for infrequent, or highly variable communication patterns. Even though, we simplify the communication structure significantly through our algorithm the connectivity or the scalability of the communication modules are almost maintained as the original NoC design. Using this method, we could improve the timing performance by 49.19%, and the area taken by the communication structure has been reduced by 24.03%.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.191-210
• /
• 2009

Internet was first designed only for sending data, but as the time passed, internet started to evolve into a broadband multi-media web that is capable of transmitting sound, video, high-capacity data and more due to the demands of internet users and the rapid changing internet-communication technology. Domestically, in January, 2000 Saerom C&T, launched a free VoIP, but due to limited ways of conversation(PC to PC) and absence of a revenue model, and bad speech quality, it had hit it's growth limit. This research studied VoIP based on technological enhancement in super-speed internet. According to IDC, domestic internet market's size was 80,800 million in 2008, and it formed a percentage of 12.5% out of the whole sound-communication market. in case of VoIP, it is able to maximize it's profit by connecting cable and wireless network, also it has a chance of becoming firm-concentrated monopoly market by fusing with IPTV. Considering the fact that our country is insignificant in MVNO revitalization, regulating organizations will play a significant roll on regulating profit between large and small businesses. Further research should be done to give VoIP a secure footing to prosper and become popularized.