• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.284-293
• /
• 2015

The objective of this paper is to determine the conditions of road surface by utilizing the images collected from closed-circuit television (CCTV) cameras installed on roadside. First, a technique was examined to detect wet surfaces at nighttime. From the literature reviews, it was revealed that image processing using polarization is one of the preferred options. However, it is hard to use the polarization characteristics of road surface images at nighttime because of irregular or no light situations. In this study, we proposes a new discriminant for detecting wet and dry road surfaces using CCTV image data at night. To detect the road surface conditions with night vision, we applied the wavelet packet transform for analyzing road surface textures. Additionally, to apply the luminance feature of night CCTV images, we set the intensity histogram based on HSI(Hue Saturation Intensity) color model. With a set of 200 images taken from the field, we constructed a detection criteria hyperplane with SVM (Support Vector Machine). We conducted field tests to verify the detection ability of the wet road surfaces and obtained reliable results. The outcome of this study is also expected to be used for monitoring road surfaces to improve safety.

• Journal of KIISE:Information Networking
• /
• v.31 no.4
• /
• pp.375-383
• /
• 2004

As wireless mobile networks have been widely adopted due to their convenience for deployment, the research for improving their performance has been actively conducted. Since their throughput is restrained by the packet corruption rate not by congestion as in wired networks, however, network simulations for performance evaluation need to select the appropriate wireless channel model representing the behavior of propagation errors for the evaluated channel. The selection of the right model should depend on various factors such as the adopted frequency band, the level of signal power, the existence of obstacles against signal propagation, the sensitivity of protocols to bit errors, and etc. This paper analyzes 10-day bit traces collected from real sensor channels exhibiting the high bit error rate to determine a suitable sensor channel model. For selection, it also evaluates the performance of two error recovery algorithms such as a link layer FEC algorithm and three TCPs (Tahoe, Reno, and Vegas) over several channel models. The comparison analysis shows that CM(Chaotic Map) model predicts 3-time less BER variance and 10-time larger PER(Packet Error Rate) than traces while these differences between the other models and traces are larger than 10-time. The simulation experiments, furthermore, prove that CM model evaluates the performance of these algorithms over sensor channels with the precision at least 10-time more accurate than any other models.

• The KIPS Transactions:PartC
• /
• v.15C no.5
• /
• pp.351-358
• /
• 2008

Recently, as network flooding attacks such as DoS/DDoS and Internet Worm have posed devastating threats to network services, rapid detection and proper response mechanisms are the major concern for secure and reliable network services. However, most of the current Intrusion Detection Systems(IDSs) focus on detail analysis of packet data, which results in late detection and a high system burden to cope with high-speed network environment. In this paper we propose a lightweight and fast detection mechanism for traffic flooding attacks. Firstly, we use SNMP MIB statistical data gathered from SNMP agents, instead of raw packet data from network links. Secondly, we use a machine learning approach based on a Support Vector Machine(SVM) for attack classification. Using MIB and SVM, we achieved fast detection with high accuracy, the minimization of the system burden, and extendibility for system deployment. The proposed mechanism is constructed in a hierarchical structure, which first distinguishes attack traffic from normal traffic and then determines the type of attacks in detail. Using MIB data sets collected from real experiments involving a DDoS attack, we validate the possibility of our approaches. It is shown that network attacks are detected with high efficiency, and classified with low false alarms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1152-1160
• /
• 2004

OFDM technique was adopted as the standard of IEEE 802.1 la and it has been widely used for wireless LAN, European DVB/DAB system, Korean DMB system. In the standard of IEEE 802.11a the data packet is composed of two parts, preamble and data. Preamble is composed of short pilots and long pilots, which are used for synchronization and estimation of frequency offset and channel. We can also compensate phase noise effect in the transceiver by using above pilots. The phase noise is more complicate than frequency offset and seriously affects system performance. In this paper, we newly propose CPE and ICI simultaneous compensation method to compensate phase noise generated by transceiver oscillator and compare with previous studies. As results, phase noise effect can be significantly compensated by CPE cancellation method, PNS algorithm and our proposed CPE and ICI compensation method. Especially, the proposed CPE and ICI compensation method can achieve the best BER performance compared with original OFDM, CPE cancellation method and PNS algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.119-126
• /
• 2007

Recently, the mobility of users and mobile communication technologies have developed rapidly. The users in this state also want to connect their devices and to receive services anywhere, anytime. Hierarchical Mobile IPv6 (HMIPv6) has been proposed by the Internet Engineering Task Force (IETF) to compensate for such problems as handover latency and signaling overhead when employing Mobile IPv6 (MIPv6). HMIPv6 supports micro-mobility within a domain and introduces a new entity, namely Mobility Anchor Point (MAP) as a local home agent. However, HMIPv6 has been found to cause longer handover latency when the inter-domain handover occurs. This is because a Mobile Node (MN) has to generate two addresses and register them to Home Agent (HA) a MAP, respectively. In order to solve such problems, we propose a scheme that an MN generates one address and registers it to HA for supporting fast handover during the inter-domain handover process. In the proposed scheme, the load of MAP and MAP domain is reduced because the number of MNs which are managed by MAP is decreased and the MAP does not perform proxy Neighbor Discovery Protocol (NDP) to intercept packets destined to MNs. We evaluate the performance of proposed scheme in comparison to HMIPv6 through the simulation and numerical analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.31-38
• /
• 2018

Based on the measured data in the south western sea of Jeju Island during the SAVEX15(Shallow Water Acoustic Variability EXperiment 2015), the effect of internal waves on the PPD (Predictive Probability of Detection) of a sonar system was analyzed. The southern west sea of Jeju Island has complex flows due to internal waves and USC (Underwater Sound Channel). In this paper, sonar performance is predicted by probabilistic approach. The LFM (Linear Frequency Modulation) and MLS (Maximum Length Sequence) signals of 11 kHz - 31 kHz band of SAVEX15 data were processed to calculate the TL (Transmission Loss) and NL (Noise Level) at a distance of approximately 2.8 km from the source and the receiver. The PDF (Probability Density Function) of TL and NL is convoluted to obtain the PDF of the SE (Signal Excess) and the PPD according to the depth of the source and receiver is calculated. Analysis of the changes in the PPD over time when there are internal waves such as soliton packet and internal tide has confirmed that the PPD value is affected by different aspects.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.466-468
• /
• 1999

현재 인터넷 프로토콜인 IPv4의 주소 부족 등의 문제를 해결하기 위해 차세대 인터넷 프로토콜 IPv6에 대한 연구가 활발히 진행되고 있다. 그러나 새로운 프로토콜 IPv6 상에서 기존의 다른 상위 프로토콜 및 응용이 어떠한 영향을 받게 될지는 의문이다. 한편, IPv6 상에서 새로운 프로토콜 및 응용을 개발할 때에 많은 시험이 요구된다. 이와 같은 이유로 인해 새로운 통신 프로토콜에 있어서 모니터링은 필수적이다. 그러나 지금까지의 많은 모니터링 라이브러리들은 텍스트에 기반하고 있으며, 그래픽 데이터를 제공하는 도구들도 대부분 통계정보의 제공에 초점을 두고 있다. 이를 두고 프로토콜이 그 표준에 따라 정확한 원리에 맞게 동작하는 지를 파악하는 데는 큰 도움이 되지 않고 있다. 이에 본 연구에서는 대상 프로토콜의 실제적인 동작 과정이나 원리를 알 수 있도록 그래픽 기반의 사용자 친화적 모니터링 도구를 제작한다. 이를 위해, 먼저 IPv6가 다른 프로토콜에 영향을 미칠 수 있는 사항들을 분석한다. 다음으로 본 교에 구축되어 있는 IPv6 호스트에 모니터링에 필요한 환경을 구축하고, Java Applet을 이용한 모니터 프로그램을 제작한다. 현재 개발하는 모니터 프로그램은 TCP의 슬라이딩 윈도우(Sliding Window) 기법에 관련된 사항을 모니터링 해주는 것으로 그 범위를 한정한다. 개발된 도구를 이용하여 IPv6 상에서 FTP가 TCP를 이용하여 파일을 전송하는 경우의 모니터링을 실시하고, 그 결과를 분석 제시한다. 이로써, 개발된사용자 친화적 모니터링 도구가 얼마나 쉽게 슬라이딩 윈도우 기법을 이해시켜 주고, 내포된 의미를 파악할 수 있게 해주는지를 알 수 있다.한 것으로 연구되었다. 정상조 직에 비해 산소가 부족하여 염기성대사(anaerobic metabolism)를 많이 함으로 그 부산물인 유산 (lactic acid)이 많이 생성됨으로 정상조직보다 pH가 낮아 암 조직이 정상조직에 비해 고온온열치료에 더 잘 듣는 원인이 된다. 3) 영양이 부족한 상태의 세포는 고온온열치료에 훨씬 예민하다. 4) 암조직은 혈관상태가 정상조직에 비해 좋지 않음으로 정상조직보다 쉽게 가온이 되며, 일단 가온된 온도는 잘 식지 않음으로 정상조직에 비해 훨씬 효율적이다. 5)고 온온열치료는 4$0^{\circ}C$~43.5 $^{\circ}C$정도에서만 이 작용이 일어남으로 정상인체에서 43$^{\circ}C$이상의 가온 은 쉽지 않음으로 이 효과는 암조직에서 주고 일어나게 된다. 6)고온온열치료는 방사선치료 후에 생기는 손상의 재생을 억제함으로 방사선의 치료효과를 높인다. 7)38.5$^{\circ}C$~41.5$^{\circ}C$의 낮 은 온도에서도 암조직의 산소 상태를 호전시켜 방사선 치료효과를 증대시키는 역할을 한다.alization)가 나타난다. 그러나 무의식에 대칭화만 있는 것은 아니며, 의식의 사고양식인 비대칭도 어느 정도 나타나며, 대칭화의 정도에 따라, 대상들이 잘 구분되어 있는 단계, 의식수준의 감정단계, 집단 내에서의 대칭화 단계, 집단간에서의 대칭화 단계, 구분이 없어지는 단계로 구분하였다.systems. We believe that this taxonomy is a significant contribution because it ad

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.659-667
• /
• 2005

A Mobile Ad Hoc Network(MANET) is a multi hop wireless network with no prepared base stations or centralized administrations, where flocks of peer systems gather and compose a network. Each node operates as a normal end system in public networks. In addition to it, a MANET node is required to work as a router to forward traffic from a source or intermediate node to others. Each node operates as a normal end system in public networks, and further a MANET node work as a router to forward traffic from a source or intermediate node to the next node via routing path. Applications of MANET are extensively wide, such as battle field or any unwired place; however, these are exposed to critical problems related to network management, node's capability, and security because of frequent and dynamic changes in network topology, absence of centralized controls, restricted usage on network resources, and vulnerability oi mobile nodes which results from the special MANET's character, shared wireless media. These problems induce MANET to be weak from security attacks from eavesdropping to DoS. To guarantee secure authentication is the main part of security service In MANET because networks without secure authentication are exposed to exterior attacks. In this paper, a multistage authentication strategy based on CGSR is proposed to guarantee that only genuine and veritable nodes participate in communications. The proposed authentication model is composed of key manager, cluster head and common nodes. The cluster head is elected from secure nodes, and key manager is elected from cluster heads. The cluster head will verify other common nodes within its cluster range in MANET. Especially, ID of each node is used on communication, which allows digital signature and blocks non repudiation. For performance evaluation, attacks against node authentication are analyzed. Based on security parameters, strategies to resolve these attacks are drawn up.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.891-898
• /
• 2003

This paper analyzes and proposes a scheme that improves the performance of the RTP that is developed to support the end-to-end transmission function and QoS monitor function for real-time multimedia data transmission. Although the existing RTP module supports real-time transmission, it has some problems in guaranteeing QoS parameters. To solve this problem, we propose a new Selective Repeat Adaptive Rate Control (SRARC). The SRARC can support QoS by referring to the data transmission status from the client and then classifying the network status into three levels. It selectively transmits multimedia data and dynamically controls transmission rates based on such information as bandwidth, packet loss rate, and latency that can be calculated in data transfer phase. To verify the SRARC, we implement it in real local area networks and compare the QoS parameters of the SRARC with those of the SR and RTP By the experimental results, the SRARC shows better performance in the aspects of bandwidth usage rate, packet loss rates, and transmission delays than the existing RTP schemes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.18-25
• /
• 2014

To increase wireless capacity, the concurrent use of multiple wireless interfaces on different frequency bands, called aggregation, can be considered. In this paper, we focus on aggregation of multiple Wi-Fi interfaces with packet-level traffic spreading between the interfaces. Two aggregation schemes, link bonding and multipath TCP (MPTCP), are tested and compared in a dualband Wi-Fi radio system with their Linux implementation. Various test conditions such as traffic types, network delay, locations, interface failures and configuration parameters are considered. Experimental results show that aggregation increases throughput performance significantly over the use of a single interface. Link bonding achieves lower throughput than MPTCP due to duplicate TCP acknowledgements (ACKs) resulting from packet reordering and filtering such duplicate ACKs out is considered as a possible solution. However, link bonding is fast responsive to links' status changes such as a link failure. It is shown that different combinations of interface weights for packet spread in link bonding result in different throughput performance, envisioning a spatio-temporal adaptation of the weights. We also develop a mathematical model of power consumption and compare the power efficiency of the schemes applying different power consumption profiles.