• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.784-791
• /
• 2005

To provide VoD Service on the Internet VoD server is required to have a large amount of system resource and network bandwidth. Therefore, overlay Multicast schemes are considered as suitable alternatives but they also have some drawbacks to support on-demand media services. In this paper, we propose an overlay multicast based on-demand media service scheme which could exploit server's system resource and its network bandwidth efficiently. Proposed scheme uses shared buffer of clients involving the relay of traffic and Patching while it gives no restrictions to this scheme compared with unicast. Our simulation results show that proposed scheme can support more user than unicast and improve the network performance at the same time.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.1
• /
• pp.47-52
• /
• 2005

The context-aware retrieval method is one of the fundamental characteristics in ubiquitous computing. The essential aims of context-aware retrieval method are retrieving relevant information and delivering information quickly. We propose a new method that retrieves relevant information and delivers information quickly using characteristics of levelized contexts. We extract rules and recommendation information in the near future using context values and rules. Then we prefetch recommendation information in very near future using access score. Our method retrieves relevant information and deliver information quickly by storing only recommendation information to be needed in near future using the characteristics of levelized contexts.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1189-1202
• /
• 1999

As compared with VOD data, NOD article data has the following characteristics: it is created at any time, has a short life cycle, is selected as not one article but several articles by a user, and has high access locality in time. Because of these intrinsic features, user access patterns of NOD article data are different from those of VOD. Thus, building NOD system using the existing techniques of VOD system leads to poor performance. In this paper, we analysis the log file of a currently running electronic newspaper, show that the popularity distribution of NOD articles is different from Zipf distribution of VOD data, and suggest a new popularity model of NOD article data MS-Zipf(Multi-Selection Zipf) distribution and its approximate solution. Also we present a life cycle model of NOD article data, which shows changes of popularity over time. Using this life cycle model, we develop LLBF (Largest Life-cycle Based Frequency) prefetching algorithm and analysis he performance by simulation. The developed LLBF algorithm supports the similar level in hit-ratio to the other prefetching algorithms such as LRU(Least Recently Used) etc, while decreasing the number of data replacement in article prefetching and reducing the overhead of the prefetching in system performance. Using the accurate user access patterns of NOD article data, we could analysis correctly the performance of NOD server system and develop the efficient policies in the implementation of NOD server system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.3
• /
• pp.24-29
• /
• 2019

The paste-type adhesive can be stored for a certain period of time and can be cured at room temperature. So it is mainly used for crack patching repair of aircraft airframe structures. This study analysed the influence of environmental factors and evaluated the adherence strength characteristics according to the adherence delay time of the paste-type adhesive. The test specimens were made of aluminum alloy(AL 2024-T3) with reference to ASTM D1002 which is generally performed to measure the adherence strength of the adhesive used for metal bonding. As a result of analysing the influence of temperature and humidity, it was found that the optimal temperature range is $24.5{\pm}0.5^{\circ}C$ and the optimal humidity range is $71{\pm}1%$ for maintenance work of the aircraft using EA-9320 adhesive. In addition, the adherence strength did not decrease with the inherent application time of the EA-9320, but it was found that the adherence strength dropped rapidly when the applied time exceeded the inherent application time of it.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.69-76
• /
• 2014

In this paper, we propose a buffering scheme to improve the performance in P2P live streaming systems by adjusting the ratio of caching and prefetching portion of each peer. To this end, we assign all the peers into many groups depending on their playback periods. We then determine the ratio of caching and prefetching portion in each peer depending on its playback time position relative to those of other peers within the same group. In other words, as the playback position of a peer gets later, we increase the ratio of its caching portion. On the contrary, as the playback position of a peer gets eariler, we increase the ratio of its prefetching portion. This can significantly increase the degree of data duplication among peers that belong to each specific group. By simulation experiments, we show that our proposed an integrated prefetching/caching scheme can improve the performance considerably in terms of jitter ratio, initial playback delay and shared buffermap ratio when compared to the existing fixed portion buffering scheme.

• KIISE Transactions on Computing Practices
• /
• v.21 no.2
• /
• pp.148-153
• /
• 2015

In our domestic software industries, it is focused on such a high quality development/ testing process, maturity measurement, and so on. But the real industrial fields are still working on a code-centric development. Most of the existing legacy systems did not keep the design and highly increased the code complexity with more patching of the original codes. To solve this problem, we adopt a code visualization technique which is important to reduce the code complexity among modules. To do this, we suggest a tool chaining method based on the existing open source software tools, which extends NIPA's Software Visualization techniques applied to procedural languages. In addition, it should be refactored to fix bad couplings of the quality measurement indicators within the code visualization. As a result, we can apply reverse engineering to the legacy code, that is, from programming via model to architecture, and then make high quality software with this approach.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.59-67
• /
• 2012

This study presents the evaluation of the patching materials that are used to repair the distress of asphalt pavement. Four kinds of patching materials currently used in practice were tested in both laboratory and field. The laboratory tests included the dry and soaked Marshall stability test, indirect tensile test, wheel tracking test and adhesive strength between the asphalt pavement and the repairing material was tested as a performance test. The field study was conducted using the slab samples placed on the location of vehicle tire passing and the performance of the repairing materials were investigated as passing the traffic load. The result of the laboratory tests were satisfied with the current design criteria and material standard except for water-immersion stability. Type C patching material showed the highest adhesive shear strength among the patching materials tested. However, the mature distress, such as rutting and stripping were monitored after construction in 10 days. It was found that performance of patching material is lack of quality behavior when they were applied in the field and required to develop and applu to prevent the mature distress of the current patching materials.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.77-85
• /
• 2018

PURPOSES : The purpose of this study was to develop an urgent road-repair system and perform a field applicability test, as well as discover the optimum mix design for machine applications compared to the optimum mix design for lab applications. METHODS : According to reviews of the patent and developed equipment, self-propelled and mix-in-place equipment types are suitable for urgent pavement repair, e.g., potholes and cracks. The machine-application mix design was revised based on the optimum lab-test mix design, and the field application of a spray-injection system was performed on the job site. The mixture from the machine application and lab application was subjected to a wet-track abrasion test and a wheel-tracking test to calibrate the machine application. RESULTS and CONCLUSIONS : This study showed that the binder content could differ for the lab application and the machine application in the same setting. Based on the wet-track abrasion test result, the binder contents of the machine application exceeded the binder contents of the lab application by 1-1.5% on the same setting value. Moreover, the maximum dynamic stability value for the machine application showed 1% lower binder contents than the maximum lab-application value. Collectively, the results of the two different tests showed that the different sizes and operating methods of the machine and lab applications could affect the mix designs. Further studies will be performed to verify the bonding strength and monitor the field application.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.61-71
• /
• 2016

PURPOSES: The objective of this study was to determine the optimum ratio of mix design, for a reclaimed asphalt pavement (RAP) content of 100%, for spray injection application. METHODS: A literature review revealed that spray injection is an efficient and cost-effective application for fixing small defective regions of an asphalt pavement. Rapid-setting polymer-modified asphalt mixtures prepared from two types of rapid-setting polymer asphalt emulsion were subjected to Marshall stability and wet track abrasion tests, in order to identify the optimum mix designs. RESULTS and CONCLUSIONS : Different mix designs of type A and type B emulsions were prepared using RAP and virgin aggregates, in order to compare the performance and determine the optimum mix design. The performance of mixtures prepared with RAP was superior to that of mixtures containing virgin aggregates. Moreover, for optimum ratio of the design, the binder content prepared from RAP was set to 1~2% lower than that consisting of virgin aggregates. Compared to their Type A counterparts, type B mixtures consisting of a reactive emulsion performed better in the Marshall stability and wet track abrasion tests. The initial results confirmed the advantages associated with using RAP for spray injection applications. Further studies will be performed to verify the difference in the optimum mix design and performance obtained in the lab-scale test and tests conducted at the job site by using the spray injection machine.