• 한국항해항만학회지
• /
• 제37권1호
• /
• pp.1-7
• /
• 2013

본 연구에서는 개발된 선미부에 수직날개를 부착한 선박의 조파저항성능을 예측할 수 있는 수치해석기법의 검증에 관한 것이다. 수치해석기법은 비점성 유동장 해석기법인 랜킨소오스 패널법과 와류격자법을 사용하여 개발하였으며, 자유수면 경계조건의 비선형성은 반복해법을 사용하여 만족시켰고, 선박의 트림과 침하량을 구하는 알고리즘을 포함하고 있다. 수치해석을 위한 선체표면의 패널을 생성하기 위하여 패널절단법을 사용하였다. 4000TEU 컨테이너 운반선을 대상 선박으로 하여 선미부 6개소의 서로 다른 위치에 수직날개를 부착하여 수치해석을 수행하였으며, 수치해석기법의 타당성을 검증하기 위하여 상용 점성 유동장 해석 프로그램인 FLUENT를 사용하여 선체 주위의 점성 유동장을 계산하였고, 모형시험을 수행하여 얻은 실험 결과를 수치해석 결과와 서로 비교하였다.

• 대한조선학회논문집
• /
• 제43권6호
• /
• pp.638-646
• /
• 2006

In this paper a new hull-panel generation algorithm named 'Panel Cutting Method' was developed to solve the flow phenomena around a ship advancing on the free surface with a constant speed. In this algorithm the non-linearity of the free surface boundary conditions was taken into account using the iterative method and the raised panel was used at each iteration step. Numerical calculations were performed to investigate the validity of the developed algorithm using the series $60(C_B=0.60)$ hull The wave resistance coefficients, the wave patterns and the wave heights were compared between the computed and the experimental results at Fn=0.25 and 0.316. The comparison showed good agreement between computation and experiment.

• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.54-62
• /
• 2008

A new solution method was developed to solve the free surface flow around a hull and named as 'Variable Free Surface Panel Method'. In the method the non-linearity of the free surface boundary conditions was fully taken into account and the raised panel method was employed to effectively solve the problem. The transom stern flow was also considered and the panel on the hull was generated using the panel cutting method. Numerical calculations were performed for KCS(KRISO Container Ship) hull form and compared with the experimental data to confirm the validity of the method. The comparison with the conventional free surface panel method was also accomplished. It is confirmed that new method gives more reliable results than the conventional method.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.18-22
• /
• 2011

The Ranking source panel method was used to predict the flow phenomenon of a ship with a goose-neck type bulbous bow penetrating the free surface. The non-linearity of the free surface boundary condition was fully satisfied using an iterative calculation method, and the raised panel method was adopted to obtain a more stable solution at each iteration step. The panel cutting method was applied to generate a hull calculation grid at each iteration step, including the first step. At that time, the nose of the goose-neck type bulbous bow was divided by the free surface and the free surface panel was modified at each iteration step using the variable free surface panel method. Numerical calculations were performed to investigate the validity and efficiency of the applied numerical algorithm using the 3600 TEU container carrier. The computed wave resistance coefficients were compared with the experimentally achieved residual resistance coefficients.

• 센서학회지
• /
• 제26권4호
• /
• pp.274-279
• /
• 2017

LCD(Liquid Crystal Display) panel cutting problem is a sort of two dimensional cutting stock problem. A cutting stock problem is problem that it minimizes the loss of the stock when a stock is cut into various parts. In the most research of the two dimensional cutting stock problem, it is supposed that the relative angle of a stock and parts is not important. Usually the angle is regarded as horizontal or perpendicular. In the manufacturing of polarizing film of LCD, the relative angle should be maintained at some specific angle because of the physical and/or chemical characteristics of raw material. We propose a mathematical model for solving this problem, a two-dimensional non-Guillotine cutting stock problem that is restricted by an arranged angle. Some example problems are solved by the C++ program using ILOG CPLEX classes. We could get the verification and validation of the suggested model based on the solutions.