• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.451-452
• /
• 2010

본 논문에서는 FTA 원산지 관리를 체계적으로 할 수 있는 프로세스기반 원산지관리시스템을 소개한다. 본 시스템은 BPM 을 기반으로 FTA 원산지 판정을 하는 최초의 시스템으로, 원산지판정절차를 프로그램 소스 코드로 작성하는 것이 아니라 프로세스 모델링 방식으로 정의하여, 사용자가 원산지판정 로직을 작성하기가 용이하며, 변경된 절차를 수정하고 관리하기에 편리하다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2452-2457
• /
• 2012

When a quality inspection process rejects a product unit, consecutive repeated inspections are sometimes conducted for the rejected unit to reduce a false reject possibility. This paper analyzes a special inspection process that allows up to two times of consecutive testing for each product to decrease type I inspection errors. This study uses a Markov chain to model the steps of the inspection process and a product unit's quality states during inspection. Historical inspection results from a company are used as the data for the Markov chain model. Using the Markov chain model and data, this study analyzes the effect of this special inspection rule on the proportion of the final quality levels and scrap rate. The results demonstrate that this inspection process of possible double testing could help reduce unnecessary rejects and consequently decrease material and production costs.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2011

Cable leakage criterion of technical regulations on CATV transmission system was reinforced considering interference against CDMA mobile communication system in 2007. The criterion is $3{\mu}V$/m(at 10m) over 824~849MHz. But generally it is difficult for us to decide if a given CATV transmission facilities conform to it or not through simple measurement methods. In this paper, the problems on measuring cable leakage is identified theoretically and the measuring model with spectrum analyzer, LNA, and antenna is proposed to settle the problems. Also, the model is proved to be useful by practically measuring outdoors and analysing the results and the process to decide to fit to the criterion or not is established.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.141-154
• /
• 2002

More efforts have been given to solve the problems related to computer software by process assessment. ISO/IEC 15504(SPICE) has been developed as standardized means for process assessment. The purpose of this paper is to design and implement a process assessment system which is appropriated to the Korean assessment environment based on ISO/IEC 15504. Referring documents are: IS0/1EC 15504 standardized documents, the assessment provisions of the SPICE committee in Korea, and research papers applied the existing process assessment system to real cases. Among a lot of processes, this system is designed for (ENG2). The proposed system in the paper will support the whole process of assessment, presenting the goals and end-products for each assessment step and making it possible to compose and save the product on the same screen. In determining process rating, assessors can retrieve the saved data and documents. By doing so, the system will improve reliability in process rating. The proposed system includes 7 steps of pre-assessment and 9 steps of actual assessment in order to fully prepare assessors for process assessment. And each step has been standardized to improve user-friendliness. This system is designed to provide assessors with specific details of standardized documents, the goals of the process, outcomes of implementing the process, and presentations of base practices and input/output products. Above all, the system automatically generates an assessment rating, by calculating based on input data which assessors make out. It also presents outcomes graphically.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.113-120
• /
• 2005

The purpose of this study is to suggest a method of concrete safety inspection management system for safety inspection. this research investigates the process of building safety inspection with IDEF0(Integration DEFinition) process modeling method, focusing on concrete durability inspection, and then suggests a data management system, which allows user communications between site and related unit with RDBMS(Relational Database Management System). The suggested system is expected to provide more efficient data sharing tools and consequently improve safety inspection's quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.351-356
• /
• 1993

최근의 프로세스 공업화에 있어서 생산Line의 장치나 기계류는 점차 대형화, 고속화,연속화,복잡화되고 있다. 또한, 기계가공공업,자동차공업,기계,전자부품의 가공조립등의 생산설비는 각설비가 고도로 자동화되고 있는 실정으로 공장 전체의 유기체적인 제어 및 감독을 필요로 하고 있다. 마찬가지로 기계부품제작산업도 CNC.FMS등으로 점차 조작화,자동화됨에 따라 공작기계 장치나 기계류등의 이상이나 고장으로 생산 및 품질에 미치는 영향도 종래와 비교할 수 없을 정도로 중요시 되고 있는 실정이다, 이와같이 설비의 안전성을 도모하고 고신뢰도를 부여하기위해서는 기계설비의 이상 및 고장진단이 필수적이며, 공장 자동화와 함께 공작기계자체의 고장 및 이상진단을 실시하고, 검출된 신호의 크기등으로 고장상태를 판정해야만 한다. 공작기계에서 동적인 회전시스템을 이루는 주축용베어링의 손상은 제작하고자 하는 제품의 정밀도 표면거칠기등의 저하 뿐만아니라 시스템 전체의 기능까지도 떨어뜨리는 요인이 될수 있으므로 베어링 상태를 진단하여 송상유무를 판단하는것은 필수적이라 생각된다.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.35-40
• /
• 2020

As we enter the society of the future, efforts to increase healthy living are a major area of concern for modern people. In particular, the development of technology for a healthy life that combines ICT technology with a competitive healthcare industry environment is becoming the next growth engine. Therefore, in this paper, artificial intelligence-based data analysis of the examination results was applied in the health examination process. Through this, a research was conducted to build a knowledge base modeling that can improve the reliability of the overall judgment. To this end, an algorithm was designed through deep learning analysis to calculate and verify the test result index. Then, the modeling that provides comprehensive examination information through judgment knowledge was studied. Through the application of the proposed modeling, it is possible to analyze and utilize big data on national health, so it can be expected to reduce medical expenses and increase health.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.35-44
• /
• 2010

Currently, the unit price of public construction projects are not being evaluated appropriately for several reasons. First, the evaluation of the unit price differ per nature of the bidding process and its estimation process. In fact, pricing is determined to meet the total price in turnkey projects and to pass the low bid price deliberation process in unit price projects, and thus, such prices cannot be said to be reasonable prices per public project. After the contract is awarded, however, the prices determined without taking into consideration the characteristic of each bidding process and price estimate process are used for the valuation of progress payment, design changes, and escalation. Furthermore, this is also being applied to other low bid deliberation process as actual public project unit price, thereby affecting other processes as well. In effect, this system increases the risks for both the owner and the bidder who have determined the unit price. This research examines the risk factor and its extent in order to properly manage it in preparation for the future.

• The Journal of Society for e-Business Studies
• /
• v.15 no.2
• /
• pp.191-203
• /
• 2010

Recently applications of RFID technologies in production and logistics systems are expanding. In this research, we deal with workflow modeling methods for handling RFID-tagged parts. We verified that the material flow processes in a RFID system can be designed and assessed using workflow modeling notations, and suggested available process patterns using BPMN. In addition, we proposed an algorithm to monitor the exact status of flows and determine whether some of the events are ghost reads or not by referring predefined workflow definitions. The major contribution of this research is that it has demonstrated how well-established workflow modeling methods can be applied to RFID-based systems.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.257-262
• /
• 2010

The study investigates the various Acceptance Control Charts (ACCs) based on the factors that include process independence, data weighting scheme, subgrouping, and use of control charts. USL - LSL > $6{\sigma}$ that used in the good condition processes in the ACCs are designed by considering user's perspective, producer's perspective and both perspectives. ACCs developed from the research is efficiently applied by using the simple control limit unified with APL (Acceptable Process Level), RLP (Rejectable Process Level), Type I Error $\alpha$, and Type II Error $\beta$. Sampling interval of subgroup examines i.i.d. (Identically and Independent Distributed) or auto-correlated processes. Three types of weight schemes according to the reliability of data include Shewhart, Moving Average(MA) and Exponentially Weighted Moving Average (EWMA) which are considered when designing ACCs. Two types of control charts by the purpose of improvement are also presented. Overall, $\alpha$, $\beta$ and APL for nonconforming proportion and RPL of claim proportion can be designed by practioners who emphasize productivity and claim defense cost.