• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.157-160
• /
• 2001

본 논문은 근거리에서의 차량간 통신에 밀리미터나 광전파를 분석하는데 효과적인 Ray Tracing방법을 도입하여 오율특성을 분석하였다. 분석환경으로는 간섭신호에 강한 장점을 지니며 산소흡수에 의한 감쇠가 크며 주파수 재사용효율이 좋은 60GHz 대역에서의 비트오율을 분석하였다. 전파모델로 지면반사파, 콘크리트벽에 의한 반사와 옆 도로를 달리는 차량에 의한 반사를 고려한 Two-Ray 라이시안 채널에서의 다중접속자에 의한 DS/CDMA 시스템의 비트오율특성을 분석하여 검토하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.149-154
• /
• 2000

파랑은 먼바다에서 주로 바람에 의하여 생성되어 천해로 전파되어 오면서 천수, 굴절, 회절, 반사, 중첩의 여러 가지 변형 과정을 거친다. 이 변형 과정 가운데 바닥의 영향으로 발생하는 것은 천수, 굴절, 반사이고 파랑간에 발생하는 것은 회절, 중첩이다. 수심이 파장의 1/2보다 작은 경우 바닥의 영향을 받게 되는데 이 해역이 중간수심해와 천해에 해당한다. 파랑변형모형은 파향선추적법부터 시작된다. (중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.240-244
• /
• 2003

파랑의 변형 가운데 천수, 굴절, 회절, 반사를 예측하는 수학적 모형은 크게 두 가지 유형으로 나눌 수 있는데, 첫 번째로 파형경사인 ha(k：파수. $\alpha$：진폭)를 비선형의 매개변수로 하는 Stokes 파랑식이 있고, 두 번째로 상대파고인 $\alpha$/h를 비선형의 매개변수로 하고 상대수심인 kh를 분산성의 매개변수로 하는 천수방정식(Shallow water equation)이 있다. 파랑의 변형 가운데 천수, 굴절만을 예측하고 회절, 반사를 예측하지 못하는 수학적 모형으로는 에너지 이송방정식이 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.169-171
• /
• 2008

마이켈슨 간섭계 시스템에 두 개의 Convex Lens를 추가함으로서 평면파 참조광을 유지 시키며, 물체에 조사되는 물체광의 조사면적을 변화시킬 수 있는 새로운 형태의 마이켈슨 간섭계를 제작 하였다. 새로운 형태의 마이켈슨 간섭계를 반사형 디지털 홀로그래피 현미경 시스템(Digital Holography Microscope System)에 적용하여 촬상소자(CCD: Charge Couple Device)에 홀로그램 기록 시 기록 가능한 CCD의 유효 영역과 재생 가능 영역에 대해 연구를 하였다

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.131-136
• /
• 1993

본 연구에서는 무한덕트의 경우를 기준으로 하여 반무한덕트(semi-infinite duct)와 유한덕트에서의 소음제어결과를 비교함으로써 반사에 따른 영향을 실험적으로 고찰하였다. 제어는 광대역의 평면파 소음을 대상으로 하였고 적 응필터 기법을 적용하여 실시간으로 감소시키고자 하였다. 또한 원소음의 진 행방향과 반대방향의 음에 대한 마이크로폰의 감도(sensitivity) 역시 능동소 음제어 시스템의 성능을 결정하는 주요 요소로 볼 수 있으므로 두 개의 마 이크로폰으로써 지향성 마이크로폰을 구성.실험을 통하여 그 결과를 고찰하 였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.198-203
• /
• 1993

Hydraulic experiments were carried out to investigate the reflection characteristics of perforated breakwaters in regular wave conditions varying the width of wave chamber and the shape of perforated wall. It was found that the reflection coefficient of the perforated breakwater was very sensitive to the change of wave chamber width. giving its minimal value when the width of the wave chamber is approximately 0.2 times the wave length in the wave chamber. This phenomenon may be resulted from the wave resonance inside the wave chamber. The reflection coefficients slightly varied for all shapes of perforated wall. i.e., vortical slit, horizontal slit or circular hole. However, the reflection trend of the structure was not significantly affected by the shape of the perforated wall.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.7-12
• /
• 2001

Tbis topic is about the development of a 2-dimensional specular reflector design aid software. For a long and cylindrical shaped lamp with perfect diffusing smface, direction and quantity of reflected light flux from a specular reflector strip can be calculated consideJing reabsorption by the lamp itself. Assuming a reflector as a combination of several strip segments, the reflected flux is calculated as position, length and declination of each segment are detennined. At each step, calculated reflected flux distribution and desired flux distribution is compared graphically and numerically, so that roost optimized and efficient reflector shape can be decided by the designer. We think that this software would be useful for designing reflectors for relatively long light sources, such as fluorescent lamp, tubular high pressure sodium lamp, low pressure sodium lamp, and so on. so on.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.327-334
• /
• 2013

The interaction of oblique incident waves with a surface-mounted horizontal porous plate is investigated using matched eigenfunction expansion method under the assumption of linear potential theory. The new boundary condition on the porous plate suggested by Zhao et al.(2010) when it is situated at the still water surface is used. The imaginary part of the first propagating-mode eigenvalue in the fluid region under a horizontal porous plate, is closely related to the energy dissipation across the porous plate. By changing the porosity, plate width, wave frequencies, and incidence angles, the reflection and transmission coefficients as well as the wave loads on the porous plate are obtained. It is found that the transmission coefficients can be significantly reduced by selecting optimal porous parameter b = 5.0, also increasing the plate width and incidence angle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.321-328
• /
• 2006

In the present study extensisve numerical experiments are conducted using the CFD code, FLUENT, to investigate the energy dissipation due to perforated walls for various wall-thickness and flow conditions. A new empirical formula for energy loss coefficient considering the effect of the thickness of perforated wall is obtained based on the results of computational experiments. It is found that the energy loss coefficient decreases as the wall-thickness increases and the maximum coefficient reduction reaches upto 40% of the value calculated using the conventional formulas for the sharp-crested orifice. To check the validity of the new formula the reflection coefficient of waves due to perforated wall is evaluated and compared with the results of existing theories and hydraulic experiments. The result shows that the new formula is superior to the conventional ones.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.758-765
• /
• 2016

In this study, wave damping due to a permeable bed of finite depth was modelled using a complementary mild-slope equation for stream function. The energy dissipating term in the mild-slope equation was presented in terms of stream function. In order to prevent re-reflection of reflected waves along the outer boundary, a delta-function-shaped source function was derived to generate a wave in a computational domain. Numerical experiments were conducted to measure the reflection coefficient of waves over a planar slope for various incident wave periods. The numerical result of the proposed model was compared with that of an integral equation method, showing good agreement in general. However, the proposed model showed relatively higher transmission rate for the larger permeability and the longer wavelength.