• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.84-89
• /
• 2003

In this paper, we real-time implemented to the TMS320C5416 the vocoder of variable bit rate applied the SOLA-B algorithm by Henja to the ITU-T G.729A vocoder of 8kbps transmission rate. This proposed method using the SOLA-B algorithm is that it is reduced the duration of the speech in encoding and is played at the speed of normal by extending the duration of the speech in decoding. At this time, we bandied that the interval of cross correlation function if skipped every 3 sample for decreasing the computational amount of SOLA-B algorithm. The real-time implemented vocoder of C.729A and SOLA-B algorithm is represented the complexity of maximum that is 10.2MIPS in encoder and 2.8MIPS in decoder of 8kbps transmission rate. Also, it is represented the complexity of maximum that is 18.5MIPS in encoder and 13.1MIPS in decoder of 6kbps, it is 18.5MIPS in encoder and 13.1MIPS in decoder of 4kbps. The used memory is about program ROM 9.7kwords, table ROM 4.5kwords, RAM 5.1 kwords. The waveform of output is showed by the result of C simulator and Bit Exact. Also, for evaluation of speech quality of the vocoder of real-time implemented variable bit rate, it is estimated the MOS score of 3.69 in 4kbps.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.62-70
• /
• 2007

In this paper, the boost Power Factor Correction(PFC) technique for Direct Torque Control(DTC) of brushless DC motor drive in the constant torque region is implemented on a TMS320F2812DSP. Unlike conventional six-step PWM current control, by properly selecting the inverter voltage space vectors of the two-phase conduction mode from a simple look-up table at a predefined sampling time, the desired quasi-square wave current is obtained, therefore a much faster torque response is achieved compared to conventional current control. Furthermore, to eliminate the low-frequency torque oscillations caused by the non-ideal trapezoidal shape of the actual back-EMF waveform of the BLDC motor, a pre-stored back-EMF versus position look-up table is designed. The duty cycle of the boost converter is determined by a control algorithm based on the input voltage, output voltage which is the dc-link of the BLDC motor drive, and inductor current using average current control method with input voltage feed-forward compensation during each sampling period of the drive system. With the emergence of high-speed digital signal processors(DSPs), both PFC and simple DTC algorithms can be executed during a single sampling period of the BLDC motor drive. In the proposed method, since no PWM algorithm is required for DTC or BLDC motor drive, only one PWM output for the boost converter with 80 kHz switching frequency is used in a TMS320F2812 DSP. The validity and effectiveness of the proposed DTC of BLDC motor drive scheme with PFC are verified through the experimental results. The test results verify that the proposed PFC for DTC of BLDC motor drive improves power factor considerably from 0.77 to as close as 0.9997 with and without load conditions.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.85-93
• /
• 1984

This research was carried out to study the seed dormancy of radishes which were used for summer vegetation. The differences of dormancy of cultivars, maternal effects, the effect of full day length to mother plants, and the effects of chemical treatments for breaking the seed dormancy were considered for this study. These results sere summarized as follows; 1. The germination percentage of 7 cultlvars sown just after harvest were as follows;SP70-:0, PS11-:37.5, GJ75-:75.5, JD127-:77.5, YH85-:81.0, M55-:96.5, and JC73-:98.0%. 2. The dormany of $F_1$ seed of radish was severe when SP70-was used for mother plant. 3. Germination behavior was different by the maturity of plants grown for seed production. The dormancy of seed harvested from immature field-grown plants sown Nov. 10 was deeper than mature plants sown Mar. 22. 4. The germination ratio of tire seed of SP70-radish was increased by treatment of full day length to tire mother plant during full period of growing or since first flowering stage, while that was 0% by treatment since yellow ripening stage. 5. GA 200 ppm+thiourea 0.2% treatment was most effective for breaking of radish seed dormancy.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.91-99
• /
• 2010

Recently, recognizing user resource for personalized service has been needed in digital content service fields. Especially, to analyze user taste, recommend music and service music related information need recognition of user music file in case of online music service. Music related information service is offered through recognizing user music based on tag information. Recognition error has grown by weak points like changing and removing of tag information. Techniques of content based user music recognition with music signal itself are researched for solving upper problems. In this paper, we propose user music recognition on the internet by extracted feature from music signal. Features are extracted after suitable preprocessing for structure of content based user music recognition. Recognizing on music server consist of feature form are progressed with extracted feature. Through this, user music can be recognized independently of tag data. 600 music was collected and converted to each 5 music qualities for proving of proposed recognition. Converted 3000 experiment music on this method is used for recognition experiment on music server including 300,000 music. Average of recognition ratio was 85%. Weak points of tag based music recognition were overcome through proposed content based music recognition. Recognition performance of proposed method show a possibility that can be adapt to online music service in practice.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.1
• /
• pp.9-16
• /
• 2003

To evaluate the seismic performance of multistory building structures use an equivalent SDOF model to represent the resistance of the structure to deformation as it respond in its predominant mode. This paper presents a method of converting a MDOF system into an equivalent SDOF model. The principal objective of this investigation is to evaluate appropriateness of converting method through perform nonlinear time history analysis of a multistory building structures and an equivalent SDOF model. The hysteresis rules to be used an equivalent SDOF model is obtained from the pushover analysis. Comparing the peak inelastic response of a moment resisting reinforced concrete frames and an equivalent SDOF model, the adequacy and the validity of the converting method is verified. The conclusion of this study is following; A method of converting a MDOF system into an equivalent SDOF model through the nonlinear time history response analysis is valid. The representative lateral displacement of a moment resisting reinforced concrete frames is close to the height of the first modal participation vector \ulcorner$_1{\beta}$${_1{\mu}}=1$. It can be found that the hysteresis rule of an equivalent SDOF model have influence on the time history response. Therefore, it necessary for selecting hysteresis rules to consider hysteresis characteristics of a moment resisting reinforced concrete frames.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.308-315
• /
• 2009

Wave-current interaction due to strong ambient currents causes to alter wave properties such as wave height, wave profile and wave spectrum. In this study we first examined the SWAN model's applicability by comparing with an analytical solution of Suh et al. (1994) for wave-current interaction in finite water-depth. Numerical experiments using SWAN model have been conducted for Garolim Bay to estimate the design waveheights influenced by strong tidal currents. For the design wave periods of 8~10 sec, the design wave height of 3 m in NNW direction was increased by up to 40% when the incident waves encounter the opposing currents of 1.4 m/s while the wave height was reduced by 26% due to the following currents of 1.1 m at the bay mouth. This result indicates that the effect of wave-current interaction must be included to determine the design wave height if there exists a strong current.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.15-24
• /
• 2011

To clarify the distribution of joints and fracture zones in the Cheongju granitic mass, we analyzed drill-core and geophysical well-logging data obtained at two boreholes located 30 m from each other. Lithological properties were investigated from the drill-core data and the samples were classified based on the rock mass rating (RMR) and on rock quality designation (RQD). Subsurface discontinuities within soft and hard rocks were examined by geophysical well-logging and cross-hole seismic tomography. The velocity structures constructed from seismic tomography are well correlated with the profile of bedrock depth, previously mapped from a seismic refraction survey. Dynamic elastic moduli, obtained from full waveform sonic and ${\gamma}-{\gamma}$ logging, were interrelated with P-wave velocities to investigate the dynamic properties of the rock mass. Compared with the correlation graph between elastic moduli and velocities for hard rock at borehole BH-1, the correlation points for BH-2 data showed a wide scatter. These scattered points reflect the greater abundance of joints and fractures near borehole BH-2. This interpretation is supported by observations by acoustic televiewer (ATV) and optical televiewer (OTV) image loggings.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.425-431
• /
• 2015

Measurement accuracy was evaluated for the respiratory air flow transducer developed for applications under emergent situations. Pressure-Flow calibration equation was obtained by acquisition of air flow signals from the transducer in response to 6 flow waveforms, similar to those of artificial ventilation, generated by the standard flow generator system. Tidal volume and maximal flow rate were calculated on the flow signal then compared with the error-free data obtained by the linear displacement transducer of the flow generator system. Mean relative error of the tidal volume was within 3% and that of the maximal flow rate, approximately 5%, demonstrating accurate enough measurements. Therefore, the transducer could be applied to emergent situations to monitor the respiratory air flow signal as well as diagnostic parameters in real time.

• Journal of the Korean Society of Radiology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2016

Recently, the various digital X-ray imaging devices using CCD and TFT LCD-based flat panel digital X-ray sensor are being used. In particular, a number of studies on photon counting sensor technique have been reported. In this study, the incident X-rays fluence on the photon counting sensor material was measured to estimate photon detection efficiency which is the quantitative performance evaluation factor of photon counting sensor. The result of measuring the photon fluence by using RQA-M2 Radiation beam quality of IEC 61223-1-2 recommendations, the incident photon fluence could be defined as about $4 photons/(0.01mm)^2{\cdot}{\mu}Gy$ within $10{\mu}m$ pin-hole area, and about $50photons/(0.03mm)^2{\cdot}{\mu}Gy$ within $30{\mu}m$ pin-hole area, and about $698photons/(0.1mm)^2{\cdot}{\mu}Gy$ within $100{\mu}m$ pin-hole area. Consequently, with the previously setup of the incident fluence, the measuring of actual photon counting efficiency by observing the output waveform of the photon counting sensor material was considered possible.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.