• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.146-150
• /
• 2002

1.55${\mu}{\textrm}{m}$ PnpN optical thyristor as a smart optical switch has potential applications in advanced optical communication systems. PnpP optical thyristors operating at 1.55${\mu}{\textrm}{m}$ are proposed and fabricated for the first time. In the optical thyristors, we employ InGaAs/InP multiple quantum well (MQW) for the active n- and p-layers. The thyristors show sufficiently nonlinear s-shape I-V characteristics and spontaneous emission. In the OFF-state, the device has a high-impedance up to switching voltage of 4.03(V). On the other hand, it has low-impedance and emits spontaneous light as a light-emitting diode in the ON-state voltage of 1.77(V), and switching voltage is changed under several light input conditions. It can be used as a header processor in optical asynchronous transfer mode (ATM), as a hard limiter in optical code division multiple access (CDMA) and as a wavelength converter in optical WDM systems.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.200-207
• /
• 2009

In this paper, novel traffic gromming algorithms are proposed with a primary goal of maximize the throughput in WDM(Wavelength Division Multiplexing) ring networks. To achieve this goal, we analyze two network designs that are Lightpath Designs and Virtual Topology Designs and simulate the throughput in various traffic environments. From this methods, we propose novel traffic gromming algorithms to maximize the throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.455-463
• /
• 2004

In this paper, we deal with a ring-mesh network design problem arising from the deployment of WDM for the optical internet. The ring-mesh network consists of ring topology and full mesh topology for satisfying traffic demand while minimizing the cost of OAOMs and OXCs. The problem seeks to find an optimal clustering of traffic demands in the network such that the total number of node assignments is minimized, while satisfying ring capacity and node cardinality constraints. We formulate the problem as a mixed-integer programming model and prescribe a tabu search heuristic procedure Promising computational results within 3% optimality gap are obtained using the proposed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.361-361
• /
• 2000

In this paper, we propose a novel control signaling protocol that efficiently controls connection setup and increases the utilization of network resources. The proposed protocol, Separated Control Signaling Protocol(SCSP), separates bearer control from call control lot WDM optical networks. The main function of call control is to check the availability of network resources such as wavelengths and receivers at destination node. Bearer control is to reserve and assign wavelengths. The signaling architecture of this protocol consists of call controller and hearer controller The call controller handles call setup and release, activates the beater controller, and manages the status of call and bearer. The bearer controller reserves wavelengths, sets up bearer, tears down bearer. and notifies the status of beater to call controller. The state transition diagrams of each controller are designed. Using control messages and related primitives, the information flows for call setup and bearer setup, hearer teardown and call release, and reaction for setup failures are described to evaluate the performance. The simulation results show that the separated control signaling protocol is superior to conventional one in terms of call blocking probability and resource utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.971-980
• /
• 2013

System performance improvement through the concentrated residual dispersion per span (RDPS) in special transmission fiber spans in optical transmission links with dispersion management (DM) for wavelength division multiplexed (WDM) transmission is investigated through the comparison with the performance in optical transmission links with uniform RDPS in every fiber spans. It is confirmed that, in optical links with RDPS of 0 ps/nm uniformly distributed in the rest fiber spans, if RDPS of 300 ps/nm and 1,320 ps/nm are concentrated in 5th-13th fiber spans and 6th-13th fiber spans, respectively, then the best performance is obtained. It is also confirmed that optimal net residual dispersion (NRD) controlled by precompensation and postcompensation are 10 ps/nm and -10 ps/nm, respectively, in all two cases, and the effective launching power range below 1 dB eye opening penalty (EOP) in the concentrated RDPS of 300 ps/nm and 1,320 ps/nm are improved by 2 dB and 6 dB than optical transmission links with the uniformly distributed RDPS, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.1-10
• /
• 2001

In this paper, we propose a synchronous reservation protocol that is efficient for supporting variable sized messages in a wavelength division multiplexing (WDM) based local network using a passive star topology. A. control channel is used to coordinate transmission on data channels. Time is slotted with fixed-sized slots. The network can accommodate a variable number of nodes, and can operate independently of the change of the number of nodes. So, any 'new' node can join the network anytime without network re-initialization. Moreover, with the protocol, we can avoid data channel and destination conflicts. We analyze the performance by using EPA method according to the variation of the end to end propagation delay with respect to one slot time, and validate the results by simulation.

• Composites Research
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2005

In-situ structural health monitoring of filament wound pressure tanks were conducted during water-pressurizing test using embedded fiber Bragg grating (FBG) sensors. We need to monitor inner strains during working in order to verify the health condition of pressure tanks more accurately because finite element analyses on filament wound pressure tanks usually show large differences between inner and outer strains. Fiber optic sensors, especially FBG sensors can be easily embedded into the composite structures contrary to conventional electric strain gages (ESGs). In addition, many FBG sensors can be multiplexed in single optical fiber using wavelength division multiplexing (WDM) techniques. We fabricated a standard testing and evaluation bottle (STEB) with embedded FBG sensors and performed a water-pressurizing test. In order to increase the survivability of embedded FBG sensors, we suggested a revised fabrication process for embedding FBG sensors into a filament wound pressure tank, which includes a new protecting technique of sensor heads, the grating parts. From the experimental results, it was demonstrated that FBG sensors can be successfully adapted to filament wound pressure tanks for their structural health monitoring by embedding.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1197-1206
• /
• 2002

Recently, the research on the construction of optical Internet backbone networks using WDM has been actively progressed. In this paper, we propose the offset based service-differentiation scheme in optical burst switching (OBS) networks. We classify the services into two classes; high class and low class. The proposed scheme decides the offset time of high class so as to satisfy the required burst loss rate (BLR) of services according to the service-differentiation ratio (SDR). The SDR may be set depending on the environment of OBS network and user's requirements, our scheme decides the BLR of high class by using the required SDR and conservation law. Finally, we use the offset time decision (OTD) algorithm to determine the offset time of high class. The proposed scheme is evaluated through simulation. The result of simulation is compared with that of analysis to verify the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.485-493
• /
• 2004

The system performance of 2-Dimensional wavelength hopping/time spreading optical CDMA systems is found to be limited by the occurrence of the beat noise between the components of the signal and the multiple user interference. This paper shows that the performance is analyzed under the beat noise and no beat noise to blow impact of the beat noise. To overcome this problem, the OHL(Optical Hard-Limiter) is used in the receiver. The performance is calculated for a optical CDMA system employing asymmetric and symmetric prime-hop 2-Dimensional codes, respectively The analysis results show that the performance improved 3.5 times of simultaneous users of before and after inserting OHL in the case of no beat noise. In the case of beat noise the performance improved 1.5 times of simultaneous users of before and after inserting OHL. The performance marked use of symmetric prime-hop code.