• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.16-24
• /
• 1998

In a high speed long haul fiber optic communication system using modulation, fiber chromatic dispersion and laser chirping can cause serious performance degradations. In this paper, the combined effect of laser chirping and chromatic dispersion on the per- formance of 2.5[Gbps] rate lightwave systems operating at a wavelength of 1550[nm] was investigated. Also we used an optical equalizer to compensate the laser chirping and fiber dispersion, and knew that the receiver sensitivity was improved by about 2 ~ 4[dB].

• Resources Recycling
• /
• v.31 no.1
• /
• pp.46-55
• /
• 2022

The recycling of coated cemented carbide scraps is becoming increasingly significant for the recovery of rare metals. However, coatings consisting of Group IV and V transition metal nitrides are one of the challenging factors in obtaining high-purity materials. We investigated the structural, elastic, and mechanical properties of Group IV and V transition-metal nitrides (TiN, VN, ZrN, NbN, HfN, and TaN) using first-principle calculations. Convergence tests were performed to obtain reliable calculated results. The equilibrium structures of the nitrides were in good agreement with those of a previous study, indicating the reliability of the data. Group IV transition metal nitrides show a higher covalent bonding nature. Thus, they exhibit a higher degree of brittleness than that of Group V transition metal nitrides. In contrast, Group V transition metal nitrides show weaker resistance to shear loading and more ductile behavior than Group IV transition metal nitrides because of the metallic bonds characterized by valence electron concentration. The results of the crystal orbital Hamilton population analysis showed good agreement with the shear resistance tendencies of all transition metal nitrides.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.166-167
• /
• 2003

실리콘 기판 위에 제작되는 실리카 물질은 낮은 가격, 파이버와의 높은 결합 효율 그리고 고집적화의 장점으로 PLC(Planar Light Circuit)에 사용되고 있다. PLC 광소자 중에서 열 광학 스위치(Thermo-optic switch)는, NⅹN 매트릭스 스위치와 Add／drop multiplexer 등 비교적 낮은 속도를 갖는 광 신호 처리를 위해 중요한 소자이다. 기존의 열 광학 스위치의 경우, 방향성 결합기를 사용한 Mach-Zehnder 구조로써, 위상 제어단에서 두 도파로 간의 광 전력 교환을 막기 위해 방향성 결합기의 양쪽 끝단에에 굽은 도파로를 이용한다. (중략)

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1595-1596
• /
• 2007

광통신에 있어서 광소자와 광섬유 사이의 광결합효율이 중요하다. 광효율을 증가시키기 위하여 파이버 연마 과정이 필요하다. 기존 파이버 연마 장치는 대부분 외국 장비이고 단일모드만 작동되고 대량 생산이 용이하지 않으며 데이터 저장과 긴급상황 발생시 대처가 떨어지는 단점이 있다. 본 연구에서는 이를 보안하기 위하여 PC기반의 본 시스템을 개발하였다. 이 시스템은 여러 종류의 샘플 가공과 코어의 자동 정렬이 가능하며 PD데이터를 자동 저장한다. 또한 연마 거리를 자동 계산하여 연마 필름의 낭비를 줄였다. 정전과 같은 긴급상황 발생시 데이터를 보존하여 다음 연마시 기존 데이터로 초기화가 가능하다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.2
• /
• pp.146-153
• /
• 1998

The optical near-field patterns, propagation loss and mode sizes of x-cut $Ti:LiNbO_3$ optical waveguide which was fabricated by Ti-diffusion varying with Ti strip thickness in wet oxygen atmosphere were discussed at optical wavelength 1550nm. As Ti thickness increased from $760{\AA}$, the insertion loss of waveguide was decreased. But at Ti thickness $1500{\AA}$, mode sizes are widely broadened. The Ti thickness of below $1100{\AA}$ and above $1500{\AA}$ showed negative effects to propagation loss and fiber coupling. The best Ti thickness for fabricating low propagation loss and good fiber coupling was inferred to be between $1100{\AA}-1500{\AA}$ in our conditions. And for Ti thickness $1150{\AA}$, its propagation loss, horizontal/vertical mode sizes were showed 1.61 dB/cm, $11.9/8.9{\mu}m$ for TM, 0.22 dB/cm, $12.0/9.1{\mu}m$ for TE respectively.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.115-128
• /
• 2022

This study investigates the effect of wrist guards equipped with electronic muscle stimulation on reducing wrist pain and improving wrist function of actual lure fishing participants. This study combined conductive fabrics by selecting two products of wrist guards that can be used in lure fishing, which requires holding fishing rods with hands for a long time. It was conducted on ten healthy men aged 35 to 45, and the selection conditions were selected for those who did not have a history of surgery on the wrist and are currently enjoying lure fishing as a hobby. The experimental movement was performed 100 times before each experiment to cause delayed muscle pain to cause wrist fatigue when lure fishing was performed with the operation of grip strength and range of motion. As a result of this study, it was found that pain reduction, range of motion, and grip strength were improved when electrical stimulation was applied after wearing a wrist band in the form of a wrist wrap and semi-gloves. The conclusion of this study was that when electrical stimulation was applied to the wrist guards, the effect of improving the fatigue and function of the wrist could be confirmed through experiments. Through this study, it is expected that wearing electronic muscle stimulation wrist guards will have a significant effect on preventing wrist injuries and improving functional recovery for lure fishing participants.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.539-543
• /
• 2012

Cellulose Electro-Active Paper (EAPap) is attractive as a biomimetic actuator because of its merits: it is lightweight, operates in dry conditions, has a large displacement output, has a low actuation voltage, and has low power consumption. Cellulose is regenerated so as to align its microfibrils, which results in a piezoelectric paper. When chemically bonded and mixed with carbon nanotubes, titanium oxide, zinc oxide, tin oxides, the cellulose EAPap can be used as a hybrid nanocomposite that has versatile properties and that can meet the requirements of many application devices. This paper presents trends in recent research on the cellulose EAPap, mainly on material preparation and its use in devices, including biosensors, chemical sensors, flexible transistors, and actuators. This paper also explains wirelessly driving technology for the cellulose EAPap, which is attractive for use in biomimetic robotics and micro-aerial vehicles.

• New Physics: Sae Mulli
• /
• v.69 no.10
• /
• pp.1107-1114
• /
• 2019

Producing extremely stable high temperature and pressure condition is crucial in order to synthesize novel materials with various functions and to investigate their static and dynamic properties. Already a high pressure in the Mbar range, which is necessary to make novel materials, can be acquired by using a Diamond Anvil Cell (DAC), In this study, a laser-heating system combined with the DAC was designed and installed using two 1064-nm, 100-W fiber lasers on different sides of the DAC to heat the sample and three spectrometers to measure the temperature, pressure, and Raman spectra. A stainless-steel gasket, which is generally used as a sample chamber in high-pressure experiments, was heated to make a thermal radiation source, and the temperature of the heated gasket was obtained by measuring the spectrum of the radiation. By applying this technique, we were able to make various materials and to investigate their physical properties under extreme conditions.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.33-43
• /
• 2011

Routing technologies considering QoS-based hypermedia services have been seen as a crucial network property in next generation optical Internet (NGOI) networks based on IP/dense-wavelength division multiplexing (DWDM). The huge potential capacity of one single fiber. which is in Tb/s range, can be exploited by applying DWDM technology which transfers multiple data streams (classified and aggregated IP traffics) on multiple wavelengths (classified with QoS-based) simultaneously. So, DWDM-based optical networks have been a favorable approach for the next generation optical backbone networks. Finding a qualified path meeting the multiple constraints is a multi-constraint optimization problem, which has been proven to be NP-complete and cannot be solved by a simple algorithm. The majority of previous works in DWDM networks has viewed heuristic QoS routing algorithms (as an extension of the current Internet routing paradigm) which are very complex and cause the operational and implementation overheads. This aspect will be more pronounced when the network is unstable or when the size of network is large. In this paper, we propose a flooding-based unicast and multicast QoS routing methodologies(YS-QUR and YS-QMR) which incur much lower message overhead yet yields a good connection establishment success rate. The simulation results demonstrate that the YS-QUR and YS-QMR algorithms are superior to the previous routing algorithms.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.81-92
• /
• 2021

In this study, we investigated the effects of five EMS lumbar back pressure belts produced on an anatomical basis on lumbar spine stabilization. Five core muscles were selected, including the urinal, vertebral column, endotracheal, external abdominal, and large back muscles, and patterns were designed using a conductive fabric considering the appropriate muscle shape and pain-causing points. We experimented with four motions to examine the effects of different EMS abdominal compression belts on lumbar spine stabilization. Five healthy men in their 20s were selected. The selection conditions include no back pain history for the past three months, no restricted movements through pre-inspection, and the muscular strength of the body should belong to the normal grade. Using SLR, the sequence of experimental actions was chosen from the following but not limited to left-hand, body-hand, and back-line forces. Resting between movements lasted for 2 min, and the experiments were conducted after wearing the EMS abdominal pressure belt. Electrical stimulation was applied for 10 min to increase blood flow and muscle activation. The statistics of the experimental results were analyzed for specific differences by conducting the Wilcoxon and Friedman tests with nonparametric tests. The ranking results of each pattern were successfully assessed in the order of 5, 4, 3, 1, 2 for the five patterns, and we could identify slightly more significant results for experimental behavior associated with each muscle movement. Patterns produced based on anatomy showed differentiated effects when electric stimulation was applied to each muscle in different shapes, which could improve the stabilization of the lumbar spine in everyday life or training to the public. Based on these results, subsequent research would focus on developing smart healthcare clothing that is practical in daily life by employing different anatomical mechanisms, depending on the back pain, to utilize trunk-type tights.