• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.158-168
• /
• 2001

A numerical model based on the wide-angle parabolic approximation equation is developed for the accurate simulation of the directional spreading and partial breaking of irregular waves. This model disintegrates the irregular waves into a series of monochromatic wave components, and the simultaneous calculations are made for each wave component. Then, the computed wave components are superposed to get the wave height of irregular waves. To consider the partial breaking of irregular waves in the computation the amount of energy dissipation due to breaking is estimated using the superposed wave height. The accuracy of the developed model is tested by comparing the numerical results with the experimental measurements reported earlier. In the case of non-breaking waves a considerable accuracy of the model is observed for both regular and irregular waves. On the contrary it is found that the accuracy is significantly degenerated for the case of breaking waves. Some analyses for the accuracy degeneration are presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.295-302
• /
• 2007

Abnormally high waves occurring at the east coast of korea were observed at five field measurement stations and their characteristics were analyzed with the use of wind data provided by the Korean Meteorological Administration. The high waves occurred because strong Donghae twister that was developed by extratropical cyclone blew while high swell arrived at the east coast of Korea. At Sokcho, the most northern site among the five measurement stations, maximum gust speed was 63.7 m/s and significant wave height reached at its maximum of 9.69 m with the corresponding peak wave period of 12.8 s. The reason for appearance of the abnormally high waves is that high swell continued while the twister blew strongly. Moreover, the wind direction was the same as the direction of swell propagation, which maximizes the increase of wave height due to superposition of swell and wind-generated waves. On the east coast of Korea, outbreak of this type of storm waves is very probable in winter season so that it is requested to establish a countermeasure of minimizing possible damage caused by the storm waves.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.43-46
• /
• 1975

In a chopper amplifier the input signal of the AC amplifier is a train of square-waves. In the rase of square-wave the operatiom of AC amplifier is much different from that of ordinary sinusoidal wave. In this paper for the purpose of contributing to the design of chopper amplifier destortions of waveforms in the amplifier were investigated. When the time constant of each stage is equal the waveform in each stave apppears as square wave whose top is exponentially decaying. And when each stave has different time constant the waveform in n-th stage is composed of n-square waves whose tops are exponentially decaying.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.171-181
• /
• 2002

Among various numerical methods of wave transformations including wave breaking by structure, models using VOF(Volume Of Fluid) method to trace free surface are getting into the spotlight recently. In order to analyze wave transformations and velocity of the wave fields due to the permeable submerged breakwater(PSB), This study applied VOF method to the two-dimensional wave channel installed line-source to generate waves and added dissipation zone to offer a non-reflective boundary. Hydraulic experiments was performed to obtain the application of two-dimensional numerical wave channel. The results of numerical experiments using the two-dimensional wave channel agree well with the experimental data. It was shown that vortices are formed behind the PSB, and in case of the 2-rowed PSB they also are occurred in between PSBs, strongly non-linear waves are developed on the crown of the PSB, and the direction of velocities in porous media is determined by the shape of free surface.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.270-272
• /
• 2013

In order to protect coastal facilities mainly from wave and current actions, the self-locking bio blocks constituting component elements of protecting structures against scouring were designed. These blocks are adapted to the sloping bottom, coastal dunes, and submerged coastal base counteracting the destructive and erosive impulse action. A series of laboratory experiments is necessary to investigate the reflection of water waves over and against a train of protruded or submerged shore structures and compare the reflecting capabilities of incident waves including wave forces. In this study the hydraulic model experiment was conducted to identify the performance of newly designed water affinity bio blocks to keep the coast slope and bottom mound from scouring by reduction of the reflection coefficient and to convince stability of the placements. Revised design of each element of blocks were also tested for field conditions. From the result of experiment, the field applicability of the developed blocks and placement is to be discussed afterward.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2233-2240
• /
• 2007

This paper presents the measured path loss exponents and standard deviations using measured data at 60GHz to analyze the propagation characteristics of millimeter wave bands having great demand for picocellular communications. In addition the angle of arrival(AOA) were measured to analyze the arrival direction of muitipath waves affecting the received signal strength. As results of analysis, the pathloss exponents in each environment are found to be lower than 2 for free space pathloss exponent. They were determined with the qualities of bottom materials affecting signal strength. The angles of arrival by multipath waves were different with the circumference structures between transmitter and receiver. That is, the multipath waves excluding direct and ground reflected wave were difficult to find in wide space such a gymnasium and playground, however the wall multipath waves were found to arrive at receiver in the corridor. The multipath waves at 60GHz can be known to hardly affect to the received signal strength because of weak signals compared with direct wave.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.44-44
• /
• 2015

저수지나 하천 사면에서 발생하는 산사태와 토석류는 저수지와 하천 수체에 충격을 가한다. 이로 인해 발생하는 수면 충격파는 전파되어 반대편 제방으로 파의 처오름 또는 댐 제체위로의 물넘이로 큰 피해를 줄 수 있다. 최근 외국에서는 2차원 충격파 생성 및 전파의 기본 과정을 구명하기 위한 실험적 연구가 이뤄지고 있으며, 이들 연구들은 충격파의 발생과 전파, 사면활동 물질과 수체의 상호작용 그리고 자유 수면과 유속분표의 발달에 대한 자세한 관측 자료를 제시하고 있다. 아울러 충격파에 영향을 주는 지배 매개변수를 제시하고 있다. 하지만, 이러한 실험적 연구의 최근 진보에도 불구하고, 이들 지배 매개변수를 고려한 충격파 지배공식들은 대상 지역의 복잡한 바닥 지형이나, 평면적 지형 변화를 단순한 추정치로만 고려하게 된다. 따라서 복잡한 지형조건에서 토석류와 수체의 상호작용과 수면 충격파의 전파를 합리적으로 해석하는 데는 한계가 있다. 이 경우 수치모델링 기법을 대안으로 적용할 수 있으나, 수치모델링은 수면에서 충격파의 전파와 수중에서 토석류의 전파를 동시에 모의해야 하고, 뉴턴 유체와 비뉴턴 유체의 특성을 동시에 고려해야하므로 수치해석 연구자들에게는 하나의 큰 도전사항이다. 이 연구는 경계면 포착기법을 이용한 계산유체동력학 기법을 이용하여 사면활동과 이로 인한 정지 수역에서의 충격파의 발생 및 전파를 재현하기 위한 수치 모델링 기법을 개발하는 것이 목적이다. 사면활동과 수면의 경계면을 포착하고 위치를 정립하기 위해서 VOF (volume of fluid) 경계면 재구축 기법을 이용한다. 지배 방정식은 비압축성(incompressible) 질량 보존방정식과 나비어-스톡스(Navier-Stokes) 방정식이며, 서로 다른 유체의 상(phase)애 대한 체적분할이송방정식을 이용한다. 큰와 모의 계열의 난류 모델링 기법을 적용하여 충격파의 전파와 붕괴에 대한 난류의 영향을 고려하였다. 토석류는 비뉴턴 흐름저항 관계식을 적용하여 그 흐름특성을 재현하였다. 이들 지배방정식은 2차 정확도의 유한체적법(finite volume method)을 이용하여 해석한다. 외국의 연구자들이 관측하여 제시한 길이 11 m 그리고 폭 0.5 m의 수로에서 발생한 충격파를 수치적으로 재현하여 개발된 모형의 실제 문제에 대한 적용성을 보여준다.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.243-250
• /
• 2022

The purpose of this study was to propose technology to detect the wave in the image in real-time, and calculate the height of the wave-overtopping through image analysis using artificial intelligence. It was confirmed that the proposed wave overtopping detection system proposed in this study could detect the occurring of wave overtopping, even in severe weather and at night in real-time. In particular, a filtering algorithm for determining if the wave overtopping event was used, to improve the accuracy of detecting the occurrence of wave overtopping, based on a convolutional neural networks to catch the wave overtopping in CCTV images in real-time. As a result, the accuracy of the wave overtopping detection through AP50 was reviewed as 59.6%, and the speed of the overtaking detection model was 70fps based on GPU, confirming that accuracy and speed are suitable for real-time wave overtopping detection.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.525-534
• /
• 2022

This investigation used two different geophysical logging techniques to confirm the depth to which a sheet pile was driven. Depth was estimated through analysis of the movement speed and three-component movement directions of a P-wave transmitted through the ground. It was also estimated by pole-pole and pole-dipole methods using electrical data logging to measure apparent resistivity. The two methods' respective results were 9.0 m (±1.5 m) and 7.5 m. As field ground conditions will include mixtures of various materials, electrical data logging is judged to be suitable for assessing depth due to its low signal-to-noise ratio.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.151-157
• /
• 2022

The purpose of this study was to investigate the frequency characteristics of forced vibration considering the vehicle progress. And the vibration characteristics in frequency domain that occur, when vehicle passes the bump, were analyzed. The responses such as displacement, velocity and acceleration were obtained through numerical analysis, and FFT processing was performed to analyze the frequency response function(FRF) characteristics. In particular, the location of vehicle eigenmodes and external excitation modes was clearly shown and analyzed. In the forced vibration model by external force, the behavior of the eigenmode in power spectrum and real and imaginary parts were also analyzed. The mode characteristics were also analyzed in each FRF. It was approximated by assuming total excitation force by considering the exciting frequency using impulse and sine wave forces, which can give the amplitude and frequencies. The response characteristics of forced oscillations having different mass, damping and stiffness have been systematically discussed.