• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.307-309
• /
• 2001

분류문제에서 유용한 학습패턴은 클래스들간의 분류경계에 근접한 정상패턴들을 말한다. 본 연구에서는 다양한 구조와 학습 파라미터를 가진 신경망 앙상블을 구성하고 그 출력값의 편기와 분산에 기초한 패턴절수를 정의한다. 전체 학습패턴 중 일정한 임계값 이상의 패턴점수를 가진 패턴들만이 학습패턴으로 선정된다. 제안한 방법은 두 개의 인공문제와 두 개의 실제문제 (UCI Repository)에 적응, 검증되었다. 그 결과 선택된 패턴만으로 학습한 경우, 메모리 공간 절약 및 계산시간 단축의 효과뿐만 아니라 복잡도가 큰 모델이라도 과적합을 하지 않았고 실험적으로 안정된 결과를 산출했으며, 적은 수의 학습패턴만으로도 일반화 성능을 향상시키거나 적어도 저하시키지 않았다는 것을 보였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.165-172
• /
• 2003

In this paper, the new robust current control scheme is proposed for an Induction motor. The proposed design scheme of current controller tan obtain a specified stability margin through electrical parameter variation by using Kharitonov robust stability theory. The characteristics of the proposed design scheme are compared with those of a conventional scheme by computer simulation and its effectiveness and usefulness is verified by experiments on the 0.75kW induction motor drive.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.550-552
• /
• 2008

광고용 EL은 소형 띠(String)형태로 많이 사용되고 있으나, 제조기술의 발달로 면광원 형태로 제작되어 광고용으로 사용되기에 이르렀다. 면광원 EL은 부하 커패시턴스가 크고 구동 소음이 시트자체에서 발생한다는 문제가 있으므로 이를 분석하고 보완한 인버터의 설계가 필요하다. 본 논문에서는 EL특성을 분석하여 EL 시트 구동 인버터의 설계 및 제어에 대해 서술한다. 특히 부하 모델링을 통한 인버터의 토폴로지 선정 및 설계 파라미터를 구할 것이며 시뮬레이션 및 실험에 의해 그 특성을 검증한다.

• Information and Communications Magazine
• /
• v.33 no.8
• /
• pp.63-70
• /
• 2016

본고에서는 최근 활발하게 연구되고 있는 수중 음향통신을 위한 물리계층 기술에 대하여 알아 본다. 수중음향통신은 지상의 전파를 이용한 무선 통신 기술과 달리 음파를 이용한다. 음파는 수중에서 약1500m/s로 매우 저속이고 시간에 따른 다중 경로와 해수면과 해저면에서의 반사가 발생한다. 또한 수온, 염분, 수압, 해류와 해저지형 등에 의해 신호의 왜곡 및 손실이 일어나기 때문에 수중음향통신은 지상에서 전파를 이용한 통신에 비하여 매우 어려운 일이다. 본고에서는 이러한 수중음향채널의 특성을 살펴보고 링크버짓 계산을 한다. 그리고 수중음향통신을 위한 물리계층 변조기법을 살펴본다. 특히 OFDM 변조기법에 대하여 자세히 설명하고 실해역 측정을 통한 수중채널 특성을 기반으로 채널을 모델링하고 OFDM 변조기법을 위한 파라미터 선정 및 성능비교를 하였다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.9
• /
• pp.433-445
• /
• 2000

In this paper, optimal tuning problem of power system stabilizer(PSS) using Immune Algorithm(IA) is investigated to improve power system dynamic stability. In proposed method, objective function is represented as antigens. An affinity calculation is embedded within the algorithm for determining the promotion or suppression of antibody. An antibody that most fits the antigen is considered as the solution to PSS tuning problem. The computaton performance by the proposed method is compared with Genetic Algorithm(GA). The porposed PSS using IA has been applied for two sample system, single-machine infinite bus system and multi-machine power system. The performance of the proposed PSS is compared with that of conventional PSS. It is shown that the proposed PSS tuned using immune algorithm is more robust than conventional PSS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.849-853
• /
• 2014

In micro-scale electromechanical systems, the power to perform accurate position sensing often greatly exceeds the power needed to generate motion. This paper explores the implications of sampling rate and amplifier noise density selection on the performance of a system identification algorithm using a capacitive sensing circuit. Specific performance objectives are to minimize or limit convergence rate and power consumption to identify the dynamics of a rotary micro-stage. A rearrangement of the conventional recursive least-squares identification algorithm is performed to make operating cost an explicit function of sensor design parameters. It is observed that there is a strong dependence of convergence rate and error on the sampling rate, while energy dependence is driven by error that may be tolerated in the final identified parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.563-565
• /
• 2011

In this paper, the implementation consideration of communication system is suggested in IEEE 802.15.4a based wireless sensor network, and the practical issues for UWB ranging system design are investigated. First, design of UWB signals for ranging applications is considered, and selection of various signal parameters is studied. Then, link analysis is performed in order to determine UWB signal quality as a function of distance.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.683-691
• /
• 1999

In this paper, it is suggested that the selection method of optimal parameter of power system stabilizer(PSS) with robustness in low frequency oscillation for power system using Real Variable Elitism Genetc Algorithm(RVEGA). The optimal parameters were selected in the case of power system stabilizer with one lead compensator, and two lead compensator. Also, the frequency responses characteristic of PSS, the system eigenvalues criterion and the dynamic characteristic were considered in the normal load and the heavy load, which proved usefulness of RVEGA compare with Yu's compensator design theory.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.564-568
• /
• 1984

An analysis has been performed for the internally reversible heat engine with the finite heat transfer rate. In the heat engine operating between two fluid streams, there exist the optimum temperatures at which the engine has maximum power. The optimum values can be expressed in terms of the temperatures of the heat source and sink. The condition for the maximum power can be explained as the minimum entropy generation by the finite heat transfer rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.184-187
• /
• 1997

Coordinate measuring machines(CMMs) are used to obtain the dimensional information with micron accuracy. This paper is concerned with the development of the horizontal arm type coordinate measuring machine using open architecture controller. The coordinate measuring machine considered in this paper consists of three orthogonal axes in the x, y and z directions. Open architecture controller IS used to implement a measuring system which can be fulfill to various needs of endusers of coordinate measuring machines. The open architecture controller presented here is embodied in personal computers. The programs and man-machine interfaces(MM1) are developed for various measuring conditions. Through the computer simulation based on the mathematical models of the coordinate measuring machine, control parameters are optimally tuned.